alex/ESP-Nodes
1
0
Fork 0
mirror of https://github.com/alexandrebobkov/ESP-Nodes.git synced 2025-08-30 23:43:33 +00:00
Code Issues Packages Projects Releases Wiki Activity

descriptions

Browse Source
This commit is contained in:
Alex B.
2025-07-01 01:43:21 -04:00
parent da9fa483ab
commit 112a099638
8 changed files with 226 additions and 192 deletions
Download Patch File Download Diff File Expand all files Collapse all files

12
ESP-IDF_Robot/tutorial/docs/build/html/_sources/overview.rst.txt vendored
View File

@@ -7,10 +7,18 @@ The BitByteRider RC car is powered by ESP32-C3 Breadboard & Power adapter develo
Reserver Pins & GPIOs
---------------------
The table below summarizes GPIOs and pins reserved for operations purposes.
The following table summarizes GPIOs and pins reserved for operations purposes.
The GPIO numbers correspond to those on the ESP32-C3 WROOM microcontroller. The Pin number corresponds to the pin on the Breadboard and Power adapter development board.
x- and y- axis
~~~~~~~~~~~~~~
GPIO number corresponds to that on the ESP32-C3 WROOM microcontroller. The Pin number corresponds to the pin on the Breadboard and Power adapter development board.
The GPIO0 and GPIO1 assigned to measuring the voltage of x- and y- axis of the Joystick. Lastly, there is a group of GPIO pairs responsible for PWM for DC motors.
Direction and speed
~~~~~~~~~~~~~~~~~~~
The two DC motors on the left side are wired to the same PWM channel, as well as the two DC motors on the right side. Consequently, only four PWM channels are required for controlling the direction of the RC car.
A pair of PWM channels are required for defining rotation speed and direction of the DC motors on each side.
In particular, GPIO6 and GPIO5 provide PWM to the left- and right- side DC motors to rotate in a clockwise direction.