alex/ESP-Nodes
1
0
Fork 0
mirror of https://github.com/alexandrebobkov/ESP-Nodes.git synced 2025-11-02 19:14:37 +00:00
Code Issues Packages Projects Releases 2 Wiki Activity

.

Browse Source
This commit is contained in:
Alex B.
2024-07-16 21:11:16 -04:00
parent d258a70025
commit b90676fd13
615 changed files with 112854 additions and 542 deletions
Download Patch File Download Diff File Expand all files Collapse all files

28
ESP32-Rainmaker-Switch/README.md
View File

@@ -1,12 +1,24 @@
# Matter + Rainmaker Switch Example
# Switch Example
## Build and Flash firmware
Follow the ESP RainMaker Documentation [Get Started](https://rainmaker.espressif.com/docs/get-started.html) section to build and flash this firmware. Just note the path of this example.
## What to expect in this example?
- This demonstrates a Matter + RainMaker Switch. Matter is used for commissioning (also known as Wi-Fi provisioning) and local control, whereas RainMaker is used for remote control and OTA upgrades.
- This example uses the BOOT button and RGB LED on the ESP32-C3-DevKitC board to demonstrate a switch.
- To commission the device, scan the QR Code generated by the mfg_tool script using ESP RainMaker app.
- Pressing the BOOT button will send a toggle the power state of switch and send an on/off command to the remote device. This will also reflect on the phone app.
- Toggling the button on the phone app should toggle the LED on your board.
- To test remote control, change the network connection of the mobile.
- This example uses the BOOT button and RGB LED on the ESP32-S2-Saola-1/ESP32-C3-DevKitC board to demonstrate a switch.
- The LED state (green color) indicates the state of the switch.
- Pressing the BOOT button will toggle the state of the switch and hence the LED. This will also reflect on the phone app.
- Toggling the button on the phone app should toggle the LED on your board, and also print messages like these on the ESP32-S2 monitor:
> Please refer to the [README in the parent folder](../README.md) for instructions.
```
I (16073) app_main: Received value = true for Switch - power
```
### LED not working?
The ESP32-S2-Saola-1 board has the RGB LED connected to GPIO 18. However, a few earlier boards may have it on GPIO 17. Please use `CONFIG_WS2812_LED_GPIO` to set the appropriate value.
### Reset to Factory
Press and hold the BOOT button for more than 3 seconds to reset the board to factory defaults. You will have to provision the board again to use it.