descriptions

ESP-IDF_Robot/tutorial/docs/build/html/_sources/overview.rst.txt

@@ -14,7 +14,7 @@ The GPIO numbers correspond to those on the ESP32-C3 WROOM microcontroller. The
 x- and y- axis
 ~~~~~~~~~~~~~~
 
-The GPIO0 and GPIO1 assigned to measuring the voltage of x- and y- axis of the Joystick. Lastly, there is a group of GPIO pairs responsible for PWM for DC motors.
+The **GPIO0** and **GPIO1** assigned to measuring the voltage of x- and y- axis of the Joystick. Lastly, there is a group of GPIO pairs responsible for PWM for DC motors.
 
 Direction and Speed
 ~~~~~~~~~~~~~~~~~~~
@@ -24,8 +24,8 @@ Consequently, only four PWM channels are required for controlling the direction
 Based on this constraint, the RC car can only move front, back, and rotate left and right. Any other movements are not possible (i.e. diagonal).
 
 A pair of PWM channels are required for defining rotation speed and direction of the DC motors on each side.
-In particular, __GPIO6__ and GPIO5 provide PWM to the left- and right- side DC motors to rotate in a clockwise direction.
+In particular, **GPIO6** and **GPIO5** provide PWM to the left- and right- side DC motors to rotate in a **clockwise** direction.
-Similarly, GPIO4 and GPIO7 provide PWM to the left- and right- side DC motors to rotate in a counter-clockwise direction.
+Similarly, **GPIO4** and **GPIO7** provide PWM to the left- and right- side DC motors to rotate in a **counter-clockwise** direction.
 Changing PWM on each channel determines the speed and direction of the RC car.
 
 +------+-----+---------------------------------------------------------+----------------+

ESP-IDF_Robot/tutorial/docs/build/html/overview.html

@@ -42,7 +42,7 @@
 <p>The GPIO numbers correspond to those on the ESP32-C3 WROOM microcontroller. The Pin number corresponds to the pin on the Breadboard and Power adapter development board.</p>
 <section id="x-and-y-axis">
 <h3>x- and y- axis<a class="headerlink" href="#x-and-y-axis" title="Link to this heading">¶</a></h3>
-<p>The GPIO0 and GPIO1 assigned to measuring the voltage of x- and y- axis of the Joystick. Lastly, there is a group of GPIO pairs responsible for PWM for DC motors.</p>
+<p>The <strong>GPIO0</strong> and <strong>GPIO1</strong> assigned to measuring the voltage of x- and y- axis of the Joystick. Lastly, there is a group of GPIO pairs responsible for PWM for DC motors.</p>
 </section>
 <section id="direction-and-speed">
 <h3>Direction and Speed<a class="headerlink" href="#direction-and-speed" title="Link to this heading">¶</a></h3>
@@ -50,8 +50,8 @@
 Consequently, only four PWM channels are required for controlling the direction of the RC car.
 Based on this constraint, the RC car can only move front, back, and rotate left and right. Any other movements are not possible (i.e. diagonal).</p>
 <p>A pair of PWM channels are required for defining rotation speed and direction of the DC motors on each side.
-In particular, __GPIO6__ and GPIO5 provide PWM to the left- and right- side DC motors to rotate in a clockwise direction.
+In particular, <strong>GPIO6</strong> and <strong>GPIO5</strong> provide PWM to the left- and right- side DC motors to rotate in a <strong>clockwise</strong> direction.
-Similarly, GPIO4 and GPIO7 provide PWM to the left- and right- side DC motors to rotate in a counter-clockwise direction.
+Similarly, <strong>GPIO4</strong> and <strong>GPIO7</strong> provide PWM to the left- and right- side DC motors to rotate in a <strong>counter-clockwise</strong> direction.
 Changing PWM on each channel determines the speed and direction of the RC car.</p>
 <table class="docutils align-default">
 <thead>

ESP-IDF_Robot/tutorial/docs/build/html/searchindex.js

@@ -1 +1 @@
-Search.setIndex({"alltitles":{"ByteRider documentation":[[0,null]],"Chassis":[[3,"chassis"]],"Direction and Speed":[[2,"direction-and-speed"]],"Finished Work":[[3,"finished-work"]],"HOW DOES IT WORK?":[[2,null]],"INTRODUCTION":[[1,null]],"Motor Wires Harness":[[3,"motor-wires-harness"]],"Reserved Pins & GPIOs":[[2,"reserved-pins-gpios"]],"Schematic":[[2,"schematic"]],"WORK-IN-PROGRESS WALK THROUGH":[[3,null]],"Wiring":[[3,"wiring"]],"x- and y- axis":[[2,"x-and-y-axis"]]},"docnames":["index","intro","overview","progress"],"envversion":{"sphinx":65,"sphinx.domains.c":3,"sphinx.domains.changeset":1,"sphinx.domains.citation":1,"sphinx.domains.cpp":9,"sphinx.domains.index":1,"sphinx.domains.javascript":3,"sphinx.domains.math":2,"sphinx.domains.python":4,"sphinx.domains.rst":2,"sphinx.domains.std":2},"filenames":["index.rst","intro.rst","overview.rst","progress.rst"],"indexentries":{},"objects":{},"objnames":{},"objtypes":{},"terms":{"0":2,"1":2,"15":2,"16":2,"2":2,"3":2,"4":2,"5":2,"6":2,"7":2,"8":2,"A":2,"IN":0,"IT":0,"In":2,"The":2,"__gpio6__":2,"_static":[],"adapt":2,"adc1_ch0":2,"adc1_ch1":2,"add":0,"ani":2,"ar":2,"assign":2,"axi":[],"back":2,"base":2,"below":[],"bitbyterid":2,"board":2,"breadboard":2,"button":2,"c3":2,"can":2,"car":2,"chang":2,"channel":2,"chassi":0,"clockwis":2,"code":[],"column":[],"complet":3,"consequ":2,"constraint":2,"content":0,"control":[2,3],"correspond":2,"counter":2,"data":[],"dc":[2,3],"dedic":2,"defin":2,"detail":0,"determin":2,"develop":2,"developmemt":2,"diagon":2,"direct":[],"doe":0,"e":2,"each":2,"esp":[],"esp32":2,"exist":[],"finish":0,"follow":2,"four":2,"front":2,"function":2,"gpio":0,"gpio0":2,"gpio1":2,"gpio4":2,"gpio5":2,"gpio6":[],"gpio7":2,"group":2,"har":0,"harn":3,"how":0,"i":2,"idf_robot_schemat":[],"imag":[],"insid":3,"instal":3,"introduct":0,"joystick":2,"lastli":2,"ledc_channel_0":2,"ledc_channel_1":2,"ledc_channel_2":2,"ledc_channel_3":2,"left":2,"mean":2,"measur":2,"microcontrol":2,"motor":[0,2],"move":2,"movement":2,"note":2,"number":2,"onli":[2,3],"oper":2,"other":2,"pair":2,"particular":2,"pin":0,"png":[],"possibl":2,"power":2,"progress":0,"provid":2,"purpos":2,"push":2,"pwm":2,"rc":2,"requir":2,"reserv":0,"respons":2,"restructuredtext":0,"right":2,"rotat":2,"row":[],"same":[],"schemat":0,"secur":3,"see":0,"side":2,"similarli":2,"speed":[],"summar":2,"syntax":0,"tabl":2,"thi":2,"those":2,"through":0,"two":2,"us":0,"voltag":2,"walk":0,"well":[],"wire":[0,2],"work":0,"wroom":2,"x":[],"y":[],"your":0},"titles":["ByteRider documentation","INTRODUCTION","HOW DOES IT WORK?","WORK-IN-PROGRESS WALK THROUGH"],"titleterms":{"IN":3,"IT":2,"axi":2,"byterid":0,"chassi":3,"direct":2,"document":0,"doe":2,"finish":3,"gpio":2,"har":3,"how":2,"introduct":1,"motor":3,"pin":2,"progress":3,"reserv":2,"schemat":2,"speed":2,"through":3,"walk":3,"wire":3,"work":[2,3],"x":2,"y":2}})
+Search.setIndex({"alltitles":{"ByteRider documentation":[[0,null]],"Chassis":[[3,"chassis"]],"Direction and Speed":[[2,"direction-and-speed"]],"Finished Work":[[3,"finished-work"]],"HOW DOES IT WORK?":[[2,null]],"INTRODUCTION":[[1,null]],"Motor Wires Harness":[[3,"motor-wires-harness"]],"Reserved Pins & GPIOs":[[2,"reserved-pins-gpios"]],"Schematic":[[2,"schematic"]],"WORK-IN-PROGRESS WALK THROUGH":[[3,null]],"Wiring":[[3,"wiring"]],"x- and y- axis":[[2,"x-and-y-axis"]]},"docnames":["index","intro","overview","progress"],"envversion":{"sphinx":65,"sphinx.domains.c":3,"sphinx.domains.changeset":1,"sphinx.domains.citation":1,"sphinx.domains.cpp":9,"sphinx.domains.index":1,"sphinx.domains.javascript":3,"sphinx.domains.math":2,"sphinx.domains.python":4,"sphinx.domains.rst":2,"sphinx.domains.std":2},"filenames":["index.rst","intro.rst","overview.rst","progress.rst"],"indexentries":{},"objects":{},"objnames":{},"objtypes":{},"terms":{"0":2,"1":2,"15":2,"16":2,"2":2,"3":2,"4":2,"5":2,"6":2,"7":2,"8":2,"A":2,"IN":0,"IT":0,"In":2,"The":2,"__gpio6__":[],"_static":[],"adapt":2,"adc1_ch0":2,"adc1_ch1":2,"add":0,"ani":2,"ar":2,"assign":2,"axi":[],"back":2,"base":2,"below":[],"bitbyterid":2,"board":2,"breadboard":2,"button":2,"c3":2,"can":2,"car":2,"chang":2,"channel":2,"chassi":0,"clockwis":2,"code":[],"column":[],"complet":3,"consequ":2,"constraint":2,"content":0,"control":[2,3],"correspond":2,"counter":2,"data":[],"dc":[2,3],"dedic":2,"defin":2,"detail":0,"determin":2,"develop":2,"developmemt":2,"diagon":2,"direct":[],"doe":0,"e":2,"each":2,"esp":[],"esp32":2,"exist":[],"finish":0,"follow":2,"four":2,"front":2,"function":2,"gpio":0,"gpio0":2,"gpio1":2,"gpio4":2,"gpio5":2,"gpio6":2,"gpio7":2,"group":2,"har":0,"harn":3,"how":0,"i":2,"idf_robot_schemat":[],"imag":[],"insid":3,"instal":3,"introduct":0,"joystick":2,"lastli":2,"ledc_channel_0":2,"ledc_channel_1":2,"ledc_channel_2":2,"ledc_channel_3":2,"left":2,"mean":2,"measur":2,"microcontrol":2,"motor":[0,2],"move":2,"movement":2,"note":2,"number":2,"onli":[2,3],"oper":2,"other":2,"pair":2,"particular":2,"pin":0,"png":[],"possibl":2,"power":2,"progress":0,"provid":2,"purpos":2,"push":2,"pwm":2,"rc":2,"requir":2,"reserv":0,"respons":2,"restructuredtext":0,"right":2,"rotat":2,"row":[],"same":[],"schemat":0,"secur":3,"see":0,"side":2,"similarli":2,"speed":[],"summar":2,"syntax":0,"tabl":2,"thi":2,"those":2,"through":0,"two":2,"us":0,"voltag":2,"walk":0,"well":[],"wire":[0,2],"work":0,"wroom":2,"x":[],"y":[],"your":0},"titles":["ByteRider documentation","INTRODUCTION","HOW DOES IT WORK?","WORK-IN-PROGRESS WALK THROUGH"],"titleterms":{"IN":3,"IT":2,"axi":2,"byterid":0,"chassi":3,"direct":2,"document":0,"doe":2,"finish":3,"gpio":2,"har":3,"how":2,"introduct":1,"motor":3,"pin":2,"progress":3,"reserv":2,"schemat":2,"speed":2,"through":3,"walk":3,"wire":3,"work":[2,3],"x":2,"y":2}})

ESP-IDF_Robot/tutorial/docs/build/simplepdf/.buildinfo

@@ -1,4 +1,4 @@
 # Sphinx build info version 1
 # This file records the configuration used when building these files. When it is not found, a full rebuild will be done.
-config: 98742c429cdbadc2becb44395c60939a
+config: 6d8bb3fb4393b77d66d70fe7030eee64
 tags: 62a1e7829a13fc7881b6498c52484ec0

ESP-IDF_Robot/tutorial/docs/build/simplepdf/index.html

@@ -181,7 +181,15 @@
             </a>
            </h4>
            <p>
-            The GPIO0 and GPIO1 assigned to measuring the voltage of x- and y- axis of the Joystick. Lastly, there is a group of GPIO pairs responsible for PWM for DC motors.
+            The
+            <strong>
+             GPIO0
+            </strong>
+            and
+            <strong>
+             GPIO1
+            </strong>
+            assigned to measuring the voltage of x- and y- axis of the Joystick. Lastly, there is a group of GPIO pairs responsible for PWM for DC motors.
            </p>
           </section>
           <section id="direction-and-speed">
@@ -198,8 +206,32 @@ Based on this constraint, the RC car can only move front, back, and rotate left
            </p>
            <p>
             A pair of PWM channels are required for defining rotation speed and direction of the DC motors on each side.
-In particular, __GPIO6__ and GPIO5 provide PWM to the left- and right- side DC motors to rotate in a clockwise direction.
+In particular,
-Similarly, GPIO4 and GPIO7 provide PWM to the left- and right- side DC motors to rotate in a counter-clockwise direction.
+            <strong>
+             GPIO6
+            </strong>
+            and
+            <strong>
+             GPIO5
+            </strong>
+            provide PWM to the left- and right- side DC motors to rotate in a
+            <strong>
+             clockwise
+            </strong>
+            direction.
+Similarly,
+            <strong>
+             GPIO4
+            </strong>
+            and
+            <strong>
+             GPIO7
+            </strong>
+            provide PWM to the left- and right- side DC motors to rotate in a
+            <strong>
+             counter-clockwise
+            </strong>
+            direction.
 Changing PWM on each channel determines the speed and direction of the RC car.
            </p>
            <table class="docutils align-default">