alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2025-08-16 06:54:22 +00:00
Code Issues Packages Projects Releases Wiki Activity

feat(spi_master): p4 add master driver supported

Browse Source
This commit is contained in:
wanlei
2023-08-31 19:17:40 +08:00
parent 5306b3308f
commit 00fcdce725
29 changed files with 1728 additions and 540 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
components/driver/spi/include/driver/spi_master.h
View File

@@ -115,6 +115,7 @@ typedef struct {
#define SPI_TRANS_MULTILINE_CMD (1<<9) ///< The data lines used at command phase is the same as data phase (otherwise, only one data line is used at command phase)
#define SPI_TRANS_MODE_OCT (1<<10) ///< Transmit/receive data in 8-bit mode
#define SPI_TRANS_MULTILINE_ADDR SPI_TRANS_MODE_DIOQIO_ADDR ///< The data lines used at address phase is the same as data phase (otherwise, only one data line is used at address phase)
#define SPI_TRANS_DMA_BUFFER_ALIGN_MANUAL (1<<11) ///< By default driver will automatically re-alloc dma buffer if it doesn't meet hardware alignment or dma_capable requirements, this flag is for you to disable this feature, you will need to take care of the alignment otherwise driver will return you error ESP_ERR_INVALID_ARG
/**
* This structure describes one SPI transaction. The descriptor should not be modified until the transaction finishes.
@@ -208,6 +209,7 @@ esp_err_t spi_bus_remove_device(spi_device_handle_t handle);
* @return
* - ESP_ERR_INVALID_ARG if parameter is invalid. This can happen if SPI_TRANS_CS_KEEP_ACTIVE flag is specified while
* the bus was not acquired (`spi_device_acquire_bus()` should be called first)
* or set flag SPI_TRANS_DMA_BUFFER_ALIGN_MANUAL but tx or rx buffer not DMA-capable, or addr&len not align to cache line size
* - ESP_ERR_TIMEOUT if there was no room in the queue before ticks_to_wait expired
* - ESP_ERR_NO_MEM if allocating DMA-capable temporary buffer failed
* - ESP_ERR_INVALID_STATE if previous transactions are not finished
@@ -273,6 +275,7 @@ esp_err_t spi_device_transmit(spi_device_handle_t handle, spi_transaction_t *tra
* @return
* - ESP_ERR_INVALID_ARG if parameter is invalid. This can happen if SPI_TRANS_CS_KEEP_ACTIVE flag is specified while
* the bus was not acquired (`spi_device_acquire_bus()` should be called first)
* or set flag SPI_TRANS_DMA_BUFFER_ALIGN_MANUAL but tx or rx buffer not DMA-capable, or addr&len not align to cache line size
* - ESP_ERR_TIMEOUT if the device cannot get control of the bus before ``ticks_to_wait`` expired
* - ESP_ERR_NO_MEM if allocating DMA-capable temporary buffer failed
* - ESP_ERR_INVALID_STATE if previous transactions are not finished