alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2025-08-10 04:43:33 +00:00
Code Issues Packages Projects Releases Wiki Activity

TWAI: bringup for S3 and C3

Browse Source
This commit is contained in:
Marius Vikhammer
2021-01-14 10:44:59 +08:00
parent 19d92ef6b2
commit 0713e93b8f
18 changed files with 341 additions and 191 deletions
Download Patch File Download Diff File Expand all files Collapse all files

88
components/hal/esp32s3/include/hal/twai_ll.h
View File

@@ -30,26 +30,25 @@ extern "C" {
#include <stdbool.h>
#include "hal/twai_types.h"
#include "soc/twai_periph.h"
#include "soc/soc_caps.h"
/* ------------------------- Defines and Typedefs --------------------------- */
#define TWAI_LL_STATUS_RBS (0x1 << 0)
#define TWAI_LL_STATUS_DOS (0x1 << 1)
#define TWAI_LL_STATUS_TBS (0x1 << 2)
#define TWAI_LL_STATUS_TCS (0x1 << 3)
#define TWAI_LL_STATUS_RS (0x1 << 4)
#define TWAI_LL_STATUS_TS (0x1 << 5)
#define TWAI_LL_STATUS_ES (0x1 << 6)
#define TWAI_LL_STATUS_BS (0x1 << 7)
#define TWAI_LL_STATUS_RBS (0x1 << 0) //Receive Buffer Status
#define TWAI_LL_STATUS_DOS (0x1 << 1) //Data Overrun Status
#define TWAI_LL_STATUS_TBS (0x1 << 2) //Transmit Buffer Status
#define TWAI_LL_STATUS_TCS (0x1 << 3) //Transmission Complete Status
#define TWAI_LL_STATUS_RS (0x1 << 4) //Receive Status
#define TWAI_LL_STATUS_TS (0x1 << 5) //Transmit Status
#define TWAI_LL_STATUS_ES (0x1 << 6) //Error Status
#define TWAI_LL_STATUS_BS (0x1 << 7) //Bus Status
#define TWAI_LL_INTR_RI (0x1 << 0)
#define TWAI_LL_INTR_TI (0x1 << 1)
#define TWAI_LL_INTR_EI (0x1 << 2)
#define TWAI_LL_INTR_RI (0x1 << 0) //Receive Interrupt
#define TWAI_LL_INTR_TI (0x1 << 1) //Transmit Interrupt
#define TWAI_LL_INTR_EI (0x1 << 2) //Error Interrupt
//Data overrun interrupt not supported in SW due to HW peculiarities
#define TWAI_LL_INTR_EPI (0x1 << 5)
#define TWAI_LL_INTR_ALI (0x1 << 6)
#define TWAI_LL_INTR_BEI (0x1 << 7)
#define TWAI_LL_INTR_EPI (0x1 << 5) //Error Passive Interrupt
#define TWAI_LL_INTR_ALI (0x1 << 6) //Arbitration Lost Interrupt
#define TWAI_LL_INTR_BEI (0x1 << 7) //Bus Error Interrupt
/*
* The following frame structure has an NEARLY identical bit field layout to
@@ -95,14 +94,12 @@ _Static_assert(sizeof(twai_ll_frame_buffer_t) == 13, "TX/RX buffer type should b
* in order to write the majority of configuration registers.
*
* @param hw Start address of the TWAI registers
* @return true if reset mode was entered successfully
*
* @note Reset mode is automatically entered on BUS OFF condition
*/
static inline bool twai_ll_enter_reset_mode(twai_dev_t *hw)
static inline void twai_ll_enter_reset_mode(twai_dev_t *hw)
{
hw->mode_reg.rm = 1;
return hw->mode_reg.rm;
}
/**
@@ -113,14 +110,12 @@ static inline bool twai_ll_enter_reset_mode(twai_dev_t *hw)
* operating mode.
*
* @param hw Start address of the TWAI registers
* @return true if reset mode was exit successfully
*
* @note Reset mode must be exit to initiate BUS OFF recovery
*/
static inline bool twai_ll_exit_reset_mode(twai_dev_t *hw)
static inline void twai_ll_exit_reset_mode(twai_dev_t *hw)
{
hw->mode_reg.rm = 0;
return !(hw->mode_reg.rm);
}
/**
@@ -189,7 +184,7 @@ static inline void twai_ll_set_cmd_tx(twai_dev_t *hw)
*/
static inline void twai_ll_set_cmd_tx_single_shot(twai_dev_t *hw)
{
hw->command_reg.val = 0x03; //Writing to TR and AT simultaneously
hw->command_reg.val = 0x03; //Set command_reg.tr and command_reg.at simultaneously for single shot transmittion request
}
/**
@@ -269,7 +264,7 @@ static inline void twai_ll_set_cmd_self_rx_request(twai_dev_t *hw)
*/
static inline void twai_ll_set_cmd_self_rx_single_shot(twai_dev_t *hw)
{
hw->command_reg.val = 0x12;
hw->command_reg.val = 0x12; //Set command_reg.srr and command_reg.at simultaneously for single shot self reception request
}
/* --------------------------- Status Register ------------------------------ */
@@ -307,8 +302,6 @@ static inline bool twai_ll_is_last_tx_successful(twai_dev_t *hw)
return hw->status_reg.tcs;
}
//Todo: Add stand alone status bit check functions when necessary
/* -------------------------- Interrupt Register ---------------------------- */
/**
@@ -337,12 +330,7 @@ static inline uint32_t twai_ll_get_and_clear_intrs(twai_dev_t *hw)
*/
static inline void twai_ll_set_enabled_intrs(twai_dev_t *hw, uint32_t intr_mask)
{
#ifdef TWAI_BRP_DIV_SUPPORTED
//ESP32 Rev 2 has brp div. Need to mask when setting
hw->interrupt_enable_reg.val = (hw->interrupt_enable_reg.val & 0x10) | intr_mask;
#else
hw->interrupt_enable_reg.val = intr_mask;
#endif
}
/* ------------------------ Bus Timing Registers --------------------------- */
@@ -358,18 +346,10 @@ static inline void twai_ll_set_enabled_intrs(twai_dev_t *hw, uint32_t intr_mask)
* @param triple_sampling Triple Sampling enable/disable
*
* @note Must be called in reset mode
* @note ESP32 rev 2 or later can support a x2 brp by setting a brp_div bit,
* allowing the brp to go from a maximum of 128 to 256.
* @note ESP32S3 brp can be any even number between 2 to 32768
*/
static inline void twai_ll_set_bus_timing(twai_dev_t *hw, uint32_t brp, uint32_t sjw, uint32_t tseg1, uint32_t tseg2, bool triple_sampling)
{
#ifdef TWAI_BRP_DIV_SUPPORTED
if (brp > SOC_TWAI_BRP_DIV_THRESH) {
//Need to set brp_div bit
hw->interrupt_enable_reg.brp_div = 1;
brp /= 2;
}
#endif
hw->bus_timing_0_reg.brp = (brp / 2) - 1;
hw->bus_timing_0_reg.sjw = sjw - 1;
hw->bus_timing_1_reg.tseg1 = tseg1 - 1;
@@ -389,7 +369,6 @@ static inline void twai_ll_set_bus_timing(twai_dev_t *hw, uint32_t brp, uint32_t
static inline void twai_ll_clear_arb_lost_cap(twai_dev_t *hw)
{
(void)hw->arbitration_lost_captue_reg.val;
//Todo: Decode ALC register
}
/* ----------------------------- ECC Register ------------------------------- */
@@ -404,7 +383,6 @@ static inline void twai_ll_clear_arb_lost_cap(twai_dev_t *hw)
static inline void twai_ll_clear_err_code_cap(twai_dev_t *hw)
{
(void)hw->error_code_capture_reg.val;
//Todo: Decode error code capture
}
/* ----------------------------- EWL Register ------------------------------- */
@@ -588,7 +566,7 @@ static inline void twai_ll_format_frame_buffer(uint32_t id, uint8_t dlc, const u
}
uint8_t *data_buffer = (is_extd) ? tx_frame->extended.data : tx_frame->standard.data;
if (!is_rtr) { //Only copy data if the frame is a data frame (i.e not RTR)
if (!is_rtr) { //Only copy data if the frame is a data frame (i.e not a remote frame)
for (int i = 0; (i < dlc) && (i < TWAI_FRAME_MAX_DLC); i++) {
data_buffer[i] = data[i];
}
@@ -663,42 +641,26 @@ static inline uint32_t twai_ll_get_rx_msg_count(twai_dev_t *hw)
* @brief Set CLKOUT Divider and enable/disable
*
* Configure CLKOUT. CLKOUT is a pre-scaled version of APB CLK. Divider can be
* 1, or any even number from 2 to 14. Set the divider to 0 to disable CLKOUT.
* 1, or any even number from 2 to 490. Set the divider to 0 to disable CLKOUT.
*
* @param hw Start address of the TWAI registers
* @param divider Divider for CLKOUT. Set to 0 to disable CLKOUT
* @param divider Divider for CLKOUT (any even number from 2 to 490). Set to 0 to disable CLKOUT
*/
static inline void twai_ll_set_clkout(twai_dev_t *hw, uint32_t divider)
{
if (divider >= 2 && divider <= 14) {
if (divider >= 2 && divider <= 490) {
hw->clock_divider_reg.co = 0;
hw->clock_divider_reg.cd = (divider / 2) - 1;
} else if (divider == 1) {
//Setting the divider reg to max value (7) means a divider of 1
//Setting the divider reg to max value (255) means a divider of 1
hw->clock_divider_reg.co = 0;
hw->clock_divider_reg.cd = 7;
hw->clock_divider_reg.cd = 255;
} else {
hw->clock_divider_reg.co = 1;
hw->clock_divider_reg.cd = 0;
}
}
/**
* @brief Set register address mapping to extended mode
*
* Extended mode register address mapping consists of more registers and extra
* features.
*
* @param hw Start address of the TWAI registers
*
* @note Must be called before setting any configuration
* @note Must be called in reset mode
*/
static inline void twai_ll_enable_extended_reg_layout(twai_dev_t *hw)
{
hw->clock_divider_reg.cd = 1;
}
#ifdef __cplusplus
}
#endif