mirror of
https://github.com/espressif/esp-idf.git
synced 2025-08-11 13:00:19 +00:00
ESP32H2: Introduce new chip target esp32h2, hello_world example supported
This commit is contained in:
Cao Sen Miao
321
components/bootloader_support/src/esp32h2/bootloader_esp32h2.c
Normal file
321
components/bootloader_support/src/esp32h2/bootloader_esp32h2.c
Normal file
@@ -0,0 +1,321 @@
|
||||
/*
|
||||
* SPDX-FileCopyrightText: 2022 Espressif Systems (Shanghai) CO LTD
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*/
|
||||
#include <stdint.h>
|
||||
#include "sdkconfig.h"
|
||||
#include "esp_attr.h"
|
||||
#include "esp_log.h"
|
||||
#include "esp_image_format.h"
|
||||
#include "flash_qio_mode.h"
|
||||
#include "esp_rom_gpio.h"
|
||||
#include "esp_rom_efuse.h"
|
||||
#include "esp_rom_uart.h"
|
||||
#include "esp_rom_sys.h"
|
||||
#include "esp_rom_spiflash.h"
|
||||
#include "soc/gpio_sig_map.h"
|
||||
#include "soc/io_mux_reg.h"
|
||||
#include "soc/assist_debug_reg.h"
|
||||
#include "esp_cpu.h"
|
||||
#include "soc/rtc.h"
|
||||
#include "soc/spi_periph.h"
|
||||
#include "soc/extmem_reg.h"
|
||||
#include "soc/io_mux_reg.h"
|
||||
#include "soc/pcr_reg.h"
|
||||
#include "esp32h2/rom/efuse.h"
|
||||
#include "esp32h2/rom/ets_sys.h"
|
||||
#include "bootloader_common.h"
|
||||
#include "bootloader_init.h"
|
||||
#include "bootloader_clock.h"
|
||||
#include "bootloader_flash_config.h"
|
||||
#include "bootloader_mem.h"
|
||||
#include "esp_private/regi2c_ctrl.h"
|
||||
#include "soc/regi2c_lp_bias.h"
|
||||
#include "soc/regi2c_bias.h"
|
||||
#include "bootloader_console.h"
|
||||
#include "bootloader_flash_priv.h"
|
||||
#include "bootloader_soc.h"
|
||||
#include "esp_efuse.h"
|
||||
#include "hal/mmu_hal.h"
|
||||
#include "hal/cache_hal.h"
|
||||
#include "soc/lp_wdt_reg.h"
|
||||
#include "hal/efuse_hal.h"
|
||||
|
||||
|
||||
static const char *TAG = "boot.esp32h2";
|
||||
|
||||
void IRAM_ATTR bootloader_configure_spi_pins(int drv)
|
||||
{
|
||||
uint8_t clk_gpio_num = SPI_CLK_GPIO_NUM;
|
||||
uint8_t q_gpio_num = SPI_Q_GPIO_NUM;
|
||||
uint8_t d_gpio_num = SPI_D_GPIO_NUM;
|
||||
uint8_t cs0_gpio_num = SPI_CS0_GPIO_NUM;
|
||||
uint8_t hd_gpio_num = SPI_HD_GPIO_NUM;
|
||||
uint8_t wp_gpio_num = SPI_WP_GPIO_NUM;
|
||||
esp_rom_gpio_pad_set_drv(clk_gpio_num, drv);
|
||||
esp_rom_gpio_pad_set_drv(q_gpio_num, drv);
|
||||
esp_rom_gpio_pad_set_drv(d_gpio_num, drv);
|
||||
esp_rom_gpio_pad_set_drv(cs0_gpio_num, drv);
|
||||
esp_rom_gpio_pad_set_drv(hd_gpio_num, drv);
|
||||
esp_rom_gpio_pad_set_drv(wp_gpio_num, drv);
|
||||
}
|
||||
|
||||
static void update_flash_config(const esp_image_header_t *bootloader_hdr)
|
||||
{
|
||||
uint32_t size;
|
||||
switch (bootloader_hdr->spi_size) {
|
||||
case ESP_IMAGE_FLASH_SIZE_1MB:
|
||||
size = 1;
|
||||
break;
|
||||
case ESP_IMAGE_FLASH_SIZE_2MB:
|
||||
size = 2;
|
||||
break;
|
||||
case ESP_IMAGE_FLASH_SIZE_4MB:
|
||||
size = 4;
|
||||
break;
|
||||
case ESP_IMAGE_FLASH_SIZE_8MB:
|
||||
size = 8;
|
||||
break;
|
||||
case ESP_IMAGE_FLASH_SIZE_16MB:
|
||||
size = 16;
|
||||
break;
|
||||
default:
|
||||
size = 2;
|
||||
}
|
||||
cache_hal_disable(CACHE_TYPE_ALL);
|
||||
// Set flash chip size
|
||||
esp_rom_spiflash_config_param(rom_spiflash_legacy_data->chip.device_id, size * 0x100000, 0x10000, 0x1000, 0x100, 0xffff); // TODO: set mode
|
||||
cache_hal_enable(CACHE_TYPE_ALL);
|
||||
}
|
||||
|
||||
static void print_flash_info(const esp_image_header_t *bootloader_hdr)
|
||||
{
|
||||
ESP_EARLY_LOGD(TAG, "magic %02x", bootloader_hdr->magic);
|
||||
ESP_EARLY_LOGD(TAG, "segments %02x", bootloader_hdr->segment_count);
|
||||
ESP_EARLY_LOGD(TAG, "spi_mode %02x", bootloader_hdr->spi_mode);
|
||||
ESP_EARLY_LOGD(TAG, "spi_speed %02x", bootloader_hdr->spi_speed);
|
||||
ESP_EARLY_LOGD(TAG, "spi_size %02x", bootloader_hdr->spi_size);
|
||||
|
||||
const char *str;
|
||||
switch (bootloader_hdr->spi_speed) {
|
||||
case ESP_IMAGE_SPI_SPEED_DIV_2:
|
||||
str = "40MHz";
|
||||
break;
|
||||
case ESP_IMAGE_SPI_SPEED_DIV_3:
|
||||
str = "26.7MHz";
|
||||
break;
|
||||
case ESP_IMAGE_SPI_SPEED_DIV_4:
|
||||
str = "20MHz";
|
||||
break;
|
||||
case ESP_IMAGE_SPI_SPEED_DIV_1:
|
||||
str = "80MHz";
|
||||
break;
|
||||
default:
|
||||
str = "20MHz";
|
||||
break;
|
||||
}
|
||||
ESP_LOGI(TAG, "SPI Speed : %s", str);
|
||||
|
||||
/* SPI mode could have been set to QIO during boot already,
|
||||
so test the SPI registers not the flash header */
|
||||
uint32_t spi_ctrl = REG_READ(SPI_MEM_CTRL_REG(0));
|
||||
if (spi_ctrl & SPI_MEM_FREAD_QIO) {
|
||||
str = "QIO";
|
||||
} else if (spi_ctrl & SPI_MEM_FREAD_QUAD) {
|
||||
str = "QOUT";
|
||||
} else if (spi_ctrl & SPI_MEM_FREAD_DIO) {
|
||||
str = "DIO";
|
||||
} else if (spi_ctrl & SPI_MEM_FREAD_DUAL) {
|
||||
str = "DOUT";
|
||||
} else if (spi_ctrl & SPI_MEM_FASTRD_MODE) {
|
||||
str = "FAST READ";
|
||||
} else {
|
||||
str = "SLOW READ";
|
||||
}
|
||||
ESP_LOGI(TAG, "SPI Mode : %s", str);
|
||||
|
||||
switch (bootloader_hdr->spi_size) {
|
||||
case ESP_IMAGE_FLASH_SIZE_1MB:
|
||||
str = "1MB";
|
||||
break;
|
||||
case ESP_IMAGE_FLASH_SIZE_2MB:
|
||||
str = "2MB";
|
||||
break;
|
||||
case ESP_IMAGE_FLASH_SIZE_4MB:
|
||||
str = "4MB";
|
||||
break;
|
||||
case ESP_IMAGE_FLASH_SIZE_8MB:
|
||||
str = "8MB";
|
||||
break;
|
||||
case ESP_IMAGE_FLASH_SIZE_16MB:
|
||||
str = "16MB";
|
||||
break;
|
||||
default:
|
||||
str = "2MB";
|
||||
break;
|
||||
}
|
||||
ESP_LOGI(TAG, "SPI Flash Size : %s", str);
|
||||
}
|
||||
|
||||
static void IRAM_ATTR bootloader_init_flash_configure(void)
|
||||
{
|
||||
bootloader_configure_spi_pins(1);
|
||||
bootloader_flash_cs_timing_config();
|
||||
}
|
||||
|
||||
static void bootloader_spi_flash_resume(void)
|
||||
{
|
||||
bootloader_execute_flash_command(CMD_RESUME, 0, 0, 0);
|
||||
esp_rom_spiflash_wait_idle(&g_rom_flashchip);
|
||||
}
|
||||
|
||||
static esp_err_t bootloader_init_spi_flash(void)
|
||||
{
|
||||
bootloader_init_flash_configure();
|
||||
bootloader_spi_flash_resume();
|
||||
bootloader_flash_unlock();
|
||||
|
||||
#if CONFIG_ESPTOOLPY_FLASHMODE_QIO || CONFIG_ESPTOOLPY_FLASHMODE_QOUT
|
||||
bootloader_enable_qio_mode();
|
||||
#endif
|
||||
|
||||
print_flash_info(&bootloader_image_hdr);
|
||||
update_flash_config(&bootloader_image_hdr);
|
||||
//ensure the flash is write-protected
|
||||
bootloader_enable_wp();
|
||||
return ESP_OK;
|
||||
}
|
||||
|
||||
static void wdt_reset_cpu0_info_enable(void)
|
||||
{
|
||||
REG_SET_BIT(PCR_ASSIST_CONF_REG, PCR_ASSIST_CLK_EN);
|
||||
REG_CLR_BIT(PCR_ASSIST_CONF_REG, PCR_ASSIST_RST_EN);
|
||||
REG_WRITE(ASSIST_DEBUG_CORE_0_RCD_EN_REG, ASSIST_DEBUG_CORE_0_RCD_PDEBUGEN | ASSIST_DEBUG_CORE_0_RCD_RECORDEN);
|
||||
}
|
||||
|
||||
static void wdt_reset_info_dump(int cpu)
|
||||
{
|
||||
(void) cpu;
|
||||
// saved PC was already printed by the ROM bootloader.
|
||||
// nothing to do here.
|
||||
}
|
||||
|
||||
static void bootloader_check_wdt_reset(void)
|
||||
{
|
||||
int wdt_rst = 0;
|
||||
soc_reset_reason_t rst_reason = esp_rom_get_reset_reason(0);
|
||||
if (rst_reason == RESET_REASON_CORE_RTC_WDT || rst_reason == RESET_REASON_CORE_MWDT0 || rst_reason == RESET_REASON_CORE_MWDT1 ||
|
||||
rst_reason == RESET_REASON_CPU0_MWDT0 || rst_reason == RESET_REASON_CPU0_MWDT1 || rst_reason == RESET_REASON_CPU0_RTC_WDT) {
|
||||
ESP_EARLY_LOGW(TAG, "PRO CPU has been reset by WDT.");
|
||||
wdt_rst = 1;
|
||||
}
|
||||
if (wdt_rst) {
|
||||
// if reset by WDT dump info from trace port
|
||||
wdt_reset_info_dump(0);
|
||||
}
|
||||
wdt_reset_cpu0_info_enable();
|
||||
}
|
||||
|
||||
static void bootloader_super_wdt_auto_feed(void)
|
||||
{
|
||||
REG_WRITE(LP_WDT_SWD_WPROTECT_REG, LP_WDT_SWD_WKEY_VALUE);
|
||||
REG_SET_BIT(LP_WDT_SWD_CONFIG_REG, LP_WDT_SWD_AUTO_FEED_EN);
|
||||
REG_WRITE(LP_WDT_SWD_WPROTECT_REG, 0);
|
||||
}
|
||||
|
||||
static inline void bootloader_hardware_init(void)
|
||||
{
|
||||
// ESP32H2-TODO: IDF-5990
|
||||
}
|
||||
|
||||
static inline void bootloader_ana_reset_config(void)
|
||||
{
|
||||
// TODO: IDF-5990 copied from C6, need update
|
||||
// Have removed bootloader_ana_super_wdt_reset_config for now; can be evaluated later to see whether needs to add it back
|
||||
/*
|
||||
For origin chip & ECO1: only support swt reset;
|
||||
For ECO2: fix brownout reset bug, support swt & brownout reset;
|
||||
For ECO3: fix clock glitch reset bug, support all reset, include: swt & brownout & clock glitch reset.
|
||||
*/
|
||||
uint8_t chip_version = efuse_hal_get_minor_chip_version();
|
||||
switch (chip_version) {
|
||||
case 0:
|
||||
case 1:
|
||||
//Disable BOR and GLITCH reset
|
||||
bootloader_ana_bod_reset_config(false);
|
||||
bootloader_ana_clock_glitch_reset_config(false);
|
||||
break;
|
||||
case 2:
|
||||
//Enable BOR reset. Disable GLITCH reset
|
||||
bootloader_ana_bod_reset_config(true);
|
||||
bootloader_ana_clock_glitch_reset_config(false);
|
||||
break;
|
||||
case 3:
|
||||
default:
|
||||
//Enable BOR, and GLITCH reset
|
||||
bootloader_ana_bod_reset_config(true);
|
||||
bootloader_ana_clock_glitch_reset_config(true);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
esp_err_t bootloader_init(void)
|
||||
{
|
||||
esp_err_t ret = ESP_OK;
|
||||
|
||||
bootloader_hardware_init();
|
||||
bootloader_ana_reset_config();
|
||||
bootloader_super_wdt_auto_feed();
|
||||
// protect memory region
|
||||
bootloader_init_mem();
|
||||
/* check that static RAM is after the stack */
|
||||
assert(&_bss_start <= &_bss_end);
|
||||
assert(&_data_start <= &_data_end);
|
||||
// clear bss section
|
||||
bootloader_clear_bss_section();
|
||||
// init eFuse virtual mode (read eFuses to RAM)
|
||||
#ifdef CONFIG_EFUSE_VIRTUAL
|
||||
ESP_LOGW(TAG, "eFuse virtual mode is enabled. If Secure boot or Flash encryption is enabled then it does not provide any security. FOR TESTING ONLY!");
|
||||
#ifndef CONFIG_EFUSE_VIRTUAL_KEEP_IN_FLASH
|
||||
esp_efuse_init_virtual_mode_in_ram();
|
||||
#endif
|
||||
#endif
|
||||
//init cache hal
|
||||
cache_hal_init();
|
||||
//reset mmu
|
||||
mmu_hal_init();
|
||||
// config clock
|
||||
bootloader_clock_configure();
|
||||
// initialize console, from now on, we can use esp_log
|
||||
bootloader_console_init();
|
||||
/* print 2nd bootloader banner */
|
||||
bootloader_print_banner();
|
||||
// update flash ID
|
||||
bootloader_flash_update_id();
|
||||
// Check and run XMC startup flow
|
||||
if ((ret = bootloader_flash_xmc_startup()) != ESP_OK) {
|
||||
ESP_LOGE(TAG, "failed when running XMC startup flow, reboot!");
|
||||
goto err;
|
||||
}
|
||||
// read bootloader header
|
||||
if ((ret = bootloader_read_bootloader_header()) != ESP_OK) {
|
||||
goto err;
|
||||
}
|
||||
// read chip revision and check if it's compatible to bootloader
|
||||
if ((ret = bootloader_check_bootloader_validity()) != ESP_OK) {
|
||||
goto err;
|
||||
}
|
||||
// initialize spi flash
|
||||
if ((ret = bootloader_init_spi_flash()) != ESP_OK) {
|
||||
goto err;
|
||||
}
|
||||
// check whether a WDT reset happend
|
||||
bootloader_check_wdt_reset();
|
||||
// config WDT
|
||||
bootloader_config_wdt();
|
||||
// enable RNG early entropy source
|
||||
bootloader_enable_random();
|
||||
err:
|
||||
return ret;
|
||||
}
|
||||
Reference in New Issue
Block a user