alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2025-08-09 12:35:28 +00:00
Code Issues Packages Projects Releases Wiki Activity

adc: support adc dma driver on all chips

Browse Source
This commit is contained in:
Armando
2021-12-15 14:15:32 +08:00
committed by Armando (Dou Yiwen)
parent 5ddce053ea
commit 4dc0d6b2fe
81 changed files with 4156 additions and 5420 deletions
Download Patch File Download Diff File Expand all files Collapse all files

64
components/driver/esp32/include/driver/adc.h
View File

@@ -1,64 +0,0 @@
/*
* SPDX-FileCopyrightText: 2019-2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include "driver/adc_common.h"
#ifdef __cplusplus
extern "C" {
#endif
/*---------------------------------------------------------------
Digital controller setting
---------------------------------------------------------------*/
/**
* @brief Set I2S data source
* @param src I2S DMA data source, I2S DMA can get data from digital signals or from ADC.
* @return
* - ESP_OK success
*/
esp_err_t adc_set_i2s_data_source(adc_i2s_source_t src);
/**
* @brief Initialize I2S ADC mode
* @param adc_unit ADC unit index
* @param channel ADC channel index
* @return
* - ESP_OK success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t adc_i2s_mode_init(adc_unit_t adc_unit, adc_channel_t channel);
/*---------------------------------------------------------------
RTC controller setting
---------------------------------------------------------------*/
/**
* @brief Read Hall Sensor
*
* @note When the power switch of SARADC1, SARADC2, HALL sensor and AMP sensor is turned on,
* the input of GPIO36 and GPIO39 will be pulled down for about 80ns.
* When enabling power for any of these peripherals, ignore input from GPIO36 and GPIO39.
* Please refer to section 3.11 of 'ECO_and_Workarounds_for_Bugs_in_ESP32' for the description of this issue.
*
* @note The Hall Sensor uses channels 0 and 3 of ADC1. Do not configure
* these channels for use as ADC channels.
*
* @note The ADC1 module must be enabled by calling
* adc1_config_width() before calling hall_sensor_read(). ADC1
* should be configured for 12 bit readings, as the hall sensor
* readings are low values and do not cover the full range of the
* ADC.
*
* @return The hall sensor reading.
*/
int hall_sensor_read(void);
#ifdef __cplusplus
}
#endif