alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2025-08-09 12:35:28 +00:00
Code Issues Packages Projects Releases Wiki Activity

soc: combine xxx_caps.h into one soc_caps.h

Browse Source 
During HAL layer refactoring and new chip bringup, we have several
caps.h for each part, to reduce the conflicts to minimum. But this is
The capabilities headers will be relataive stable once completely
written (maybe after the featues are supported by drivers).

Now ESP32 and ESP32-S2 drivers are relative stable, making it a good
time to combine all these caps.h into one soc_caps.h

This cleanup also move HAL config and pin config into separated files,
to make the responsibilities of these headers more clear. This is
helpful for the stabilities of soc_caps.h because we want to make it
public some day.
This commit is contained in:
Michael (XIAO Xufeng)
2020-09-10 10:37:58 +08:00
parent bd7fecd396
commit 647dea9395
182 changed files with 1047 additions and 1387 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
components/hal/esp32s2/adc_hal.c
View File

@@ -16,6 +16,7 @@
#include "hal/adc_hal.h"
#include "hal/adc_types.h"
#include "hal/adc_hal_conf.h"
/*---------------------------------------------------------------
Digital controller setting

1
components/hal/esp32s2/cp_dma_hal.c
View File

@@ -12,6 +12,7 @@
// See the License for the specific language governing permissions and
// limitations under the License.
#include "soc/soc_caps.h"
#include "hal/cp_dma_hal.h"
#include "hal/cp_dma_ll.h"

31
components/hal/esp32s2/include/hal/adc_hal_conf.h Normal file
View File

@@ -0,0 +1,31 @@
// Copyright 2020 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#define SOC_ADC1_DATA_INVERT_DEFAULT (0)
#define SOC_ADC2_DATA_INVERT_DEFAULT (0)
#define SOC_ADC_DIGI_DATA_INVERT_DEFAULT(PERIPH_NUM) (0)
#define SOC_ADC_FSM_RSTB_WAIT_DEFAULT (8)
#define SOC_ADC_FSM_START_WAIT_DEFAULT (5)
#define SOC_ADC_FSM_STANDBY_WAIT_DEFAULT (100)
#define ADC_FSM_SAMPLE_CYCLE_DEFAULT (3)
#define SOC_ADC_PWDET_CCT_DEFAULT (4)
#define SOC_ADC_SAR_CLK_DIV_DEFAULT(PERIPH_NUM) ((PERIPH_NUM==0)? 2 : 1)
#define SOC_ADC_DIGI_SAR_CLK_DIV_DEFAULT (2)

2
components/hal/esp32s2/include/hal/cpu_ll.h
View File

@@ -16,7 +16,7 @@
#include "esp_attr.h"
#include "soc/cpu_caps.h"
#include "soc/soc_caps.h"
#include "xt_instr_macros.h"
#include "xtensa/config/specreg.h"

5
components/hal/esp32s2/include/hal/gpio_ll.h
View File

@@ -35,6 +35,9 @@ extern "C" {
// Get GPIO hardware instance with giving gpio num
#define GPIO_LL_GET_HW(num) (((num) == 0) ? (&GPIO) : NULL)
#define GPIO_LL_PRO_CPU_INTR_ENA (BIT(0))
#define GPIO_LL_PRO_CPU_NMI_INTR_ENA (BIT(1))
/**
* @brief Enable pull-up on GPIO.
*
@@ -147,7 +150,7 @@ static inline void gpio_ll_clear_intr_status_high(gpio_dev_t *hw, uint32_t mask)
static inline void gpio_ll_intr_enable_on_core(gpio_dev_t *hw, uint32_t core_id, gpio_num_t gpio_num)
{
if (core_id == 0) {
GPIO.pin[gpio_num].int_ena = GPIO_PRO_CPU_INTR_ENA; //enable pro cpu intr
GPIO.pin[gpio_num].int_ena = GPIO_LL_PRO_CPU_INTR_ENA; //enable pro cpu intr
}
}

8
components/hal/esp32s2/include/hal/i2c_ll.h
View File

@@ -22,6 +22,8 @@
extern "C" {
#endif
#define I2C_LL_INTR_MASK (0x1ffff) /*!< I2C all interrupt bitmap */
/**
* @brief I2C hardware cmd register filed.
*/
@@ -42,7 +44,7 @@ typedef union {
* @brief I2C interrupt event
*/
typedef enum {
I2C_INTR_EVENT_ERR,
I2C_INTR_EVENT_ERR,
I2C_INTR_EVENT_ARBIT_LOST, /*!< I2C arbition lost event */
I2C_INTR_EVENT_NACK, /*!< I2C NACK event */
I2C_INTR_EVENT_TOUT, /*!< I2C time out event */
@@ -540,7 +542,7 @@ static inline void i2c_ll_write_txfifo(i2c_dev_t *hw, uint8_t *ptr, uint8_t len)
uint32_t fifo_addr = (hw == &I2C0) ? 0x6001301c : 0x6002701c;
for(int i = 0; i < len; i++) {
WRITE_PERI_REG(fifo_addr, ptr[i]);
}
}
}
/**
@@ -557,7 +559,7 @@ static inline void i2c_ll_read_rxfifo(i2c_dev_t *hw, uint8_t *ptr, uint8_t len)
uint32_t fifo_addr = (hw == &I2C0) ? 0x6001301c : 0x6002701c;
for(int i = 0; i < len; i++) {
ptr[i] = READ_PERI_REG(fifo_addr);
}
}
}
/**

2
components/hal/esp32s2/include/hal/mpu_ll.h
View File

@@ -14,7 +14,7 @@
#include <stdint.h>
#include "soc/mpu_caps.h"
#include "soc/soc_caps.h"
#include "xt_instr_macros.h"

2
components/hal/esp32s2/include/hal/rmt_ll.h
View File

@@ -18,8 +18,8 @@ extern "C" {
#endif
#include <stdbool.h>
#include "soc/soc_caps.h"
#include "soc/rmt_struct.h"
#include "soc/rmt_caps.h"
#define RMT_LL_HW_BASE (&RMT)
#define RMT_LL_MEM_BASE (&RMTMEM)

4
components/hal/esp32s2/include/hal/rtc_io_ll.h
View File

@@ -25,6 +25,8 @@
#include "hal/rtc_io_types.h"
#include "hal/gpio_types.h"
#define RTCIO_LL_PIN_FUNC 0
#ifdef __cplusplus
extern "C" {
#endif
@@ -59,7 +61,7 @@ static inline void rtcio_ll_function_select(int rtcio_num, rtcio_ll_func_t func)
// 0: GPIO connected to digital GPIO module. 1: GPIO connected to analog RTC module.
SET_PERI_REG_MASK(rtc_io_desc[rtcio_num].reg, (rtc_io_desc[rtcio_num].mux));
//0:RTC FUNCTION 1,2,3:Reserved
SET_PERI_REG_BITS(rtc_io_desc[rtcio_num].reg, RTC_IO_TOUCH_PAD1_FUN_SEL_V, SOC_PIN_FUNC_RTC_IO, rtc_io_desc[rtcio_num].func);
SET_PERI_REG_BITS(rtc_io_desc[rtcio_num].reg, RTC_IO_TOUCH_PAD1_FUN_SEL_V, RTCIO_LL_PIN_FUNC, rtc_io_desc[rtcio_num].func);
} else if (func == RTCIO_FUNC_DIGITAL) {
CLEAR_PERI_REG_MASK(rtc_io_desc[rtcio_num].reg, (rtc_io_desc[rtcio_num].mux));
SENS.sar_io_mux_conf.iomux_clk_gate_en = 0;

14
components/hal/esp32s2/include/hal/touch_sensor_ll.h
View File

@@ -48,7 +48,7 @@ static inline void touch_ll_set_meas_times(uint16_t meas_time)
//The times of charge and discharge in each measure process of touch channels.
RTCCNTL.touch_ctrl1.touch_meas_num = meas_time;
//the waiting cycles (in 8MHz) between TOUCH_START and TOUCH_XPD
RTCCNTL.touch_ctrl2.touch_xpd_wait = SOC_TOUCH_PAD_MEASURE_WAIT; //wait volt stable
RTCCNTL.touch_ctrl2.touch_xpd_wait = SOC_TOUCH_PAD_MEASURE_WAIT_MAX; //wait volt stable
}
/**
@@ -345,8 +345,8 @@ static inline void touch_ll_get_threshold(touch_pad_t touch_num, uint32_t *thres
*/
static inline void touch_ll_set_channel_mask(uint16_t enable_mask)
{
RTCCNTL.touch_scan_ctrl.touch_scan_pad_map |= (enable_mask & SOC_TOUCH_SENSOR_BIT_MASK_MAX);
SENS.sar_touch_conf.touch_outen |= (enable_mask & SOC_TOUCH_SENSOR_BIT_MASK_MAX);
RTCCNTL.touch_scan_ctrl.touch_scan_pad_map |= (enable_mask & TOUCH_PAD_BIT_MASK_ALL);
SENS.sar_touch_conf.touch_outen |= (enable_mask & TOUCH_PAD_BIT_MASK_ALL);
}
/**
@@ -359,7 +359,7 @@ static inline void touch_ll_get_channel_mask(uint16_t *enable_mask)
{
*enable_mask = SENS.sar_touch_conf.touch_outen \
& RTCCNTL.touch_scan_ctrl.touch_scan_pad_map \
& SOC_TOUCH_SENSOR_BIT_MASK_MAX;
& TOUCH_PAD_BIT_MASK_ALL;
}
/**
@@ -370,8 +370,8 @@ static inline void touch_ll_get_channel_mask(uint16_t *enable_mask)
*/
static inline void touch_ll_clear_channel_mask(uint16_t disable_mask)
{
SENS.sar_touch_conf.touch_outen &= ~(disable_mask & SOC_TOUCH_SENSOR_BIT_MASK_MAX);
RTCCNTL.touch_scan_ctrl.touch_scan_pad_map &= ~(disable_mask & SOC_TOUCH_SENSOR_BIT_MASK_MAX);
SENS.sar_touch_conf.touch_outen &= ~(disable_mask & TOUCH_PAD_BIT_MASK_ALL);
RTCCNTL.touch_scan_ctrl.touch_scan_pad_map &= ~(disable_mask & TOUCH_PAD_BIT_MASK_ALL);
}
/**
@@ -659,7 +659,7 @@ static inline void touch_ll_reset_benchmark(touch_pad_t touch_num)
/* Clear touch channels to initialize the channel value (benchmark, raw_data).
*/
if (touch_num == TOUCH_PAD_MAX) {
SENS.sar_touch_chn_st.touch_channel_clr = SOC_TOUCH_SENSOR_BIT_MASK_MAX;
SENS.sar_touch_chn_st.touch_channel_clr = TOUCH_PAD_BIT_MASK_ALL;
} else {
SENS.sar_touch_chn_st.touch_channel_clr = (1U << touch_num);
}

11
components/hal/esp32s2/include/hal/uart_ll.h
View File

@@ -25,10 +25,13 @@ extern "C" {
#endif
// The default fifo depth
#define UART_LL_FIFO_DEF_LEN (UART_FIFO_LEN)
#define UART_LL_FIFO_DEF_LEN (SOC_UART_FIFO_LEN)
// Get UART hardware instance with giving uart num
#define UART_LL_GET_HW(num) (((num) == 0) ? (&UART0) : (&UART1))
#define UART_LL_MIN_WAKEUP_THRESH (2)
#define UART_LL_INTR_MASK (0x7ffff) //All interrupt mask
// Define UART interrupts
typedef enum {
UART_INTR_RXFIFO_FULL = (0x1<<0),
@@ -247,7 +250,7 @@ static inline uint32_t uart_ll_get_txfifo_len(uart_dev_t *hw)
* @return None.
*/
static inline void uart_ll_set_stop_bits(uart_dev_t *hw, uart_stop_bits_t stop_bit)
{
{
hw->conf0.stop_bit_num = stop_bit;
}
@@ -523,7 +526,7 @@ static inline void uart_ll_set_dtr_active_level(uart_dev_t *hw, int level)
*/
static inline void uart_ll_set_wakeup_thrd(uart_dev_t *hw, uint32_t wakeup_thrd)
{
hw->sleep_conf.active_threshold = wakeup_thrd - SOC_UART_MIN_WAKEUP_THRESH;
hw->sleep_conf.active_threshold = wakeup_thrd - UART_LL_MIN_WAKEUP_THRESH;
}
/**
@@ -665,7 +668,7 @@ static inline void uart_ll_get_at_cmd_char(uart_dev_t *hw, uint8_t *cmd_char, ui
*/
static inline uint32_t uart_ll_get_wakeup_thrd(uart_dev_t *hw)
{
return hw->sleep_conf.active_threshold + SOC_UART_MIN_WAKEUP_THRESH;
return hw->sleep_conf.active_threshold + UART_LL_MIN_WAKEUP_THRESH;
}
/**

2
components/hal/esp32s2/systimer_hal.c
View File

@@ -14,10 +14,10 @@
#include <sys/param.h>
#include <assert.h>
#include "soc/soc_caps.h"
#include "hal/systimer_hal.h"
#include "hal/systimer_ll.h"
#include "hal/systimer_types.h"
#include "soc/systimer_caps.h"
#include "soc/rtc.h"
#define SYSTIMER_TICKS_PER_US (80) // Number of timer ticks per microsecond

5
components/hal/esp32s2/touch_sensor_hal.c
View File

@@ -14,13 +14,14 @@
// The HAL layer for Touch Sensor (common part)
#include "soc/soc_pins.h"
#include "hal/touch_sensor_hal.h"
#include "hal/touch_sensor_types.h"
void touch_hal_init(void)
{
touch_ll_intr_disable(TOUCH_PAD_INTR_MASK_ALL);
touch_ll_clear_channel_mask(SOC_TOUCH_SENSOR_BIT_MASK_MAX);
touch_ll_clear_channel_mask(TOUCH_PAD_BIT_MASK_ALL);
touch_ll_clear_trigger_status_mask();
touch_ll_set_meas_times(TOUCH_PAD_MEASURE_CYCLE_DEFAULT);
touch_ll_set_sleep_time(TOUCH_PAD_SLEEP_CYCLE_DEFAULT);
@@ -41,7 +42,7 @@ void touch_hal_deinit(void)
touch_ll_sleep_reset_benchmark();
touch_ll_stop_fsm();
touch_ll_clkgate(false);
touch_ll_clear_channel_mask(SOC_TOUCH_SENSOR_BIT_MASK_MAX);
touch_ll_clear_channel_mask(TOUCH_PAD_BIT_MASK_ALL);
touch_ll_clear_trigger_status_mask();
touch_ll_intr_disable(TOUCH_PAD_INTR_MASK_ALL);
touch_ll_timeout_disable();