docs: Updated Getting Started for ESP32-P4 support

docs/en/get-started/esp32p4_output_log.inc

@@ -1 +1,39 @@
-.. output_log
+.. output_log
+
+
+.. code-block:: none
+
+    ...
+    esptool.py v4.8.dev3
+    Serial port /dev/cu.SLAB_USBtoUART
+    Connecting....
+    Chip is ESP32-P4 (revision v0.0)
+    Features: High-Performance MCU
+    Crystal is 40MHz
+    MAC: 00:00:00:00:00:00
+    Uploading stub...
+    Running stub...
+    Stub running...
+    Changing baud rate to 460800
+    Changed.
+    Configuring flash size...
+    Flash will be erased from 0x00002000 to 0x00007fff...
+    Flash will be erased from 0x00010000 to 0x0003bfff...
+    Flash will be erased from 0x00008000 to 0x00008fff...
+    SHA digest in image updated
+    Compressed 20960 bytes to 12653...
+    Writing at 0x00002000... (100 %)
+    Wrote 20960 bytes (12653 compressed) at 0x00002000 in 0.6 seconds (effective 277.1 kbit/s)...
+    Hash of data verified.
+    Compressed 179584 bytes to 94528...
+    Writing at 0x00035efb... (100 %)
+    Wrote 179584 bytes (94528 compressed) at 0x00010000 in 2.6 seconds (effective 549.9 kbit/s)...
+    Hash of data verified.
+    Compressed 3072 bytes to 103...
+    Writing at 0x00008000... (100 %)
+    Wrote 3072 bytes (103 compressed) at 0x00008000 in 0.1 seconds (effective 420.7 kbit/s)...
+    Hash of data verified.
+
+    Leaving...
+    Hard resetting via RTS pin...
+    Done