Build & config: Remove leftover files from the unsupported "make" build system

components/partition_table/Makefile.projbuild

@@ -1,118 +0,0 @@
-#
-# Partition table
-#
-# The partition table is not a real component that gets linked into
-# the project. Instead, it is a standalone project to generate
-# the partition table binary as part of the build process. This
-# binary is then added to the list of files for esptool.py to flash.
-#
-.PHONY: partition_table partition_table-flash partition_table-clean partition_table_get_info
-
-PARTITION_MD5_OPT :=
-ifndef CONFIG_PARTITION_TABLE_MD5
-PARTITION_MD5_OPT := "--disable-md5sum"
-endif
-
-PARTITION_FLASHSIZE_OPT :=
-ifneq ("$(CONFIG_ESPTOOLPY_FLASHSIZE)", "")
-PARTITION_FLASHSIZE_OPT := --flash-size $(CONFIG_ESPTOOLPY_FLASHSIZE)
-endif
-
-PARTITION_SECURE_OPT :=
-ifdef CONFIG_SECURE_BOOT
-ifndef CONFIG_SECURE_BOOT_ALLOW_SHORT_APP_PARTITION
-PARTITION_SECURE_OPT += --secure
-endif
-endif
-
-# Address of partition table
-PARTITION_TABLE_OFFSET := $(CONFIG_PARTITION_TABLE_OFFSET)
-PARTITION_TABLE_OFFSET_ARG := --offset $(PARTITION_TABLE_OFFSET)
-
-GEN_ESP32PART := $(PYTHON) $(COMPONENT_PATH)/gen_esp32part.py -q $(PARTITION_MD5_OPT) $(PARTITION_FLASHSIZE_OPT) $(PARTITION_TABLE_OFFSET_ARG) $(PARTITION_SECURE_OPT)
-GET_PART_INFO := $(COMPONENT_PATH)/parttool.py -q
-
-# if CONFIG_PARTITION_TABLE_FILENAME is unset, means we haven't re-generated config yet...
-ifneq ("$(CONFIG_PARTITION_TABLE_FILENAME)","")
-
-ifndef PARTITION_TABLE_CSV_PATH
-# Path to partition CSV file is relative to project path for custom
-# partition CSV files, but relative to component dir otherwise.
-PARTITION_TABLE_ROOT := $(call dequote,$(if $(CONFIG_PARTITION_TABLE_CUSTOM),$(PROJECT_PATH),$(COMPONENT_PATH)))
-PARTITION_TABLE_CSV_PATH := $(call dequote,$(abspath $(PARTITION_TABLE_ROOT)/$(call dequote,$(CONFIG_PARTITION_TABLE_FILENAME))))
-endif
-
-PARTITION_TABLE_CSV_NAME := $(notdir $(PARTITION_TABLE_CSV_PATH))
-
-PARTITION_TABLE_BIN := $(BUILD_DIR_BASE)/$(PARTITION_TABLE_CSV_NAME:.csv=.bin)
-
-ifdef CONFIG_SECURE_BOOT_V1_ENABLED
-ifdef CONFIG_SECURE_BOOT_BUILD_SIGNED_BINARIES
-PARTITION_TABLE_BIN_UNSIGNED := $(PARTITION_TABLE_BIN:.bin=-unsigned.bin)
-# add an extra signing step for secure partition table
-$(PARTITION_TABLE_BIN): $(PARTITION_TABLE_BIN_UNSIGNED) $(SDKCONFIG_MAKEFILE) $(SECURE_BOOT_SIGNING_KEY)
-	$(ESPSECUREPY) sign_data --version 1 --keyfile $(SECURE_BOOT_SIGNING_KEY) -o $@ $<
-else
-# secure bootloader disabled, both files are the same
-PARTITION_TABLE_BIN_UNSIGNED := $(PARTITION_TABLE_BIN)
-endif
-else
-# secure bootloader disabled, both files are the same
-PARTITION_TABLE_BIN_UNSIGNED := $(PARTITION_TABLE_BIN)
-endif
-
-$(PARTITION_TABLE_BIN_UNSIGNED): $(PARTITION_TABLE_CSV_PATH) $(SDKCONFIG_MAKEFILE) | check_python_dependencies
-	@echo "Building partitions from $(PARTITION_TABLE_CSV_PATH)..."
-	$(GEN_ESP32PART) $< $@
-
-all_binaries: $(PARTITION_TABLE_BIN) partition_table_get_info check_table_contents
-
-partition_table_get_info: $(PARTITION_TABLE_BIN)
-	$(eval PHY_DATA_OFFSET:=$(shell $(GET_PART_INFO)  --partition-table-file $(PARTITION_TABLE_BIN) \
-							--partition-table-offset $(PARTITION_TABLE_OFFSET) \
-							get_partition_info --partition-type data --partition-subtype phy --info offset))
-	$(eval APP_OFFSET:=$(shell $(GET_PART_INFO) --partition-table-file $(PARTITION_TABLE_BIN) \
-							--partition-table-offset $(PARTITION_TABLE_OFFSET) \
-							get_partition_info --partition-boot-default --info offset))
-	$(eval OTA_DATA_OFFSET:=$(shell $(GET_PART_INFO) --partition-table-file $(PARTITION_TABLE_BIN) \
-							--partition-table-offset $(PARTITION_TABLE_OFFSET) \
-							get_partition_info --partition-type data --partition-subtype ota --info offset))
-	$(eval OTA_DATA_SIZE:=$(shell $(GET_PART_INFO) --partition-table-file $(PARTITION_TABLE_BIN) \
-							--partition-table-offset $(PARTITION_TABLE_OFFSET) \
-							get_partition_info --partition-type data --partition-subtype ota --info size))
-	$(eval FACTORY_OFFSET:=$(shell $(GET_PART_INFO) --partition-table-file $(PARTITION_TABLE_BIN) \
-							--partition-table-offset $(PARTITION_TABLE_OFFSET) \
-							get_partition_info --partition-type app --partition-subtype factory  --info offset))
-
-export APP_OFFSET
-export PHY_DATA_OFFSET
-export OTA_DATA_OFFSET
-export OTA_DATA_SIZE
-
-# If anti-rollback option is set then factory partition should not be in Partition Table.
-# In this case, should be used the partition table with two ota app without the factory.
-check_table_contents: partition_table_get_info
-	@echo $(if $(CONFIG_BOOTLOADER_APP_ANTI_ROLLBACK), $(if $(FACTORY_OFFSET), $(error "ERROR: Anti-rollback option is enabled. Partition table should consist of two ota app without factory partition."), ""), "")
-
-PARTITION_TABLE_FLASH_CMD = $(ESPTOOLPY_SERIAL) write_flash $(PARTITION_TABLE_OFFSET) $(PARTITION_TABLE_BIN)
-ESPTOOL_ALL_FLASH_ARGS += $(PARTITION_TABLE_OFFSET) $(PARTITION_TABLE_BIN)
-UF2_ADD_BINARIES += $(PARTITION_TABLE_OFFSET) $(PARTITION_TABLE_BIN)
-
-partition_table: $(PARTITION_TABLE_BIN) partition_table_get_info | check_python_dependencies
-	@echo "Partition table binary generated. Contents:"
-	@echo $(SEPARATOR)
-	$(GEN_ESP32PART) $<
-	@echo $(SEPARATOR)
-	@echo "Partition flashing command:"
-	@echo "$(PARTITION_TABLE_FLASH_CMD)"
-
-partition_table-flash: $(PARTITION_TABLE_BIN) | check_python_dependencies
-	@echo "Flashing partition table..."
-	$(PARTITION_TABLE_FLASH_CMD)
-
-partition_table-clean:
-	rm -f $(PARTITION_TABLE_BIN)
-
-clean: partition_table-clean
-
-endif

components/partition_table/component.mk

@@ -1,4 +0,0 @@
-# partition table component is special, because it doesn't contain any
-# IDF source files. It only adds steps via Makefile.projbuild &
-# Kconfig.projbuild
-COMPONENT_CONFIG_ONLY := 1

components/partition_table/test/component.mk

@@ -1,5 +0,0 @@
-#
-#Component Makefile
-#
-
-COMPONENT_ADD_LDFLAGS = -Wl,--whole-archive -l$(COMPONENT_NAME) -Wl,--no-whole-archive