alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2025-08-08 20:21:04 +00:00
Code Issues Packages Projects Releases Wiki Activity

uart: uart_set_pin function will now use IOMUX whenever possible

Browse Source 
By using IOMUX instead of GPIO Matrix for UART, it is now possible
on ESP32 boards to use the UART as a wake up source even if it is
not used as a console.
For other boards where this issue was not present, using IOMUX has
the advantage to be faster than using GPIO matrix, so a highest
baudrate can be used
This commit is contained in:
Omar Chebib
2021-07-09 14:20:33 +08:00
parent 03fb3973a2
commit 779e7400b0
24 changed files with 697 additions and 103 deletions
Download Patch File Download Diff File Expand all files Collapse all files

103
components/soc/esp32s3/uart_periph.c
View File

@@ -19,27 +19,104 @@
*/
const uart_signal_conn_t uart_periph_signal[SOC_UART_NUM] = {
{
.tx_sig = U0TXD_OUT_IDX,
.rx_sig = U0RXD_IN_IDX,
.rts_sig = U0RTS_OUT_IDX,
.cts_sig = U0CTS_IN_IDX,
.pins = {
[SOC_UART_TX_PIN_IDX] = {
.default_gpio = U0TXD_GPIO_NUM,
.iomux_func = U0TXD_MUX_FUNC,
.input = 0,
.signal = U0TXD_OUT_IDX,
},
[SOC_UART_RX_PIN_IDX] = {
.default_gpio = U0RXD_GPIO_NUM,
.iomux_func = U0RXD_MUX_FUNC,
.input = 1,
.signal = U0RXD_IN_IDX,
},
[SOC_UART_RTS_PIN_IDX] = {
.default_gpio = U0RTS_GPIO_NUM,
.iomux_func = U0RTS_MUX_FUNC,
.input = 0,
.signal = U0RTS_OUT_IDX,
},
[SOC_UART_CTS_PIN_IDX] = {
.default_gpio = U0CTS_GPIO_NUM,
.iomux_func = U0CTS_MUX_FUNC,
.input = 1,
.signal = U0CTS_IN_IDX,
}
},
.irq = ETS_UART0_INTR_SOURCE,
.module = PERIPH_UART0_MODULE,
},
{
.tx_sig = U1TXD_OUT_IDX,
.rx_sig = U1RXD_IN_IDX,
.rts_sig = U1RTS_OUT_IDX,
.cts_sig = U1CTS_IN_IDX,
.pins = {
[SOC_UART_TX_PIN_IDX] = {
.default_gpio = U1TXD_GPIO_NUM,
.iomux_func = U1TXD_MUX_FUNC,
.input = 0,
.signal = U1TXD_OUT_IDX,
},
[SOC_UART_RX_PIN_IDX] = {
.default_gpio = U1RXD_GPIO_NUM,
.iomux_func = U1RXD_MUX_FUNC,
.input = 1,
.signal = U1RXD_IN_IDX,
},
[SOC_UART_RTS_PIN_IDX] = {
.default_gpio = U1RTS_GPIO_NUM,
.iomux_func = U1RTS_MUX_FUNC,
.input = 0,
.signal = U1RTS_OUT_IDX,
},
[SOC_UART_CTS_PIN_IDX] = {
.default_gpio = U1CTS_GPIO_NUM,
.iomux_func = U1CTS_MUX_FUNC,
.input = 1,
.signal = U1CTS_IN_IDX,
},
},
.irq = ETS_UART1_INTR_SOURCE,
.module = PERIPH_UART1_MODULE,
},
{
.tx_sig = U2TXD_OUT_IDX,
.rx_sig = U2RXD_IN_IDX,
.rts_sig = U2RTS_OUT_IDX,
.cts_sig = U2CTS_IN_IDX,
.pins = {
[SOC_UART_TX_PIN_IDX] = {
.default_gpio = U2TXD_GPIO_NUM,
.iomux_func = U2TXD_MUX_FUNC,
.input = 0,
.signal = U2TXD_OUT_IDX,
},
[SOC_UART_RX_PIN_IDX] = {
.default_gpio = U2RXD_GPIO_NUM,
.iomux_func = U2RXD_MUX_FUNC,
.input = 1,
.signal = U2RXD_IN_IDX,
},
[SOC_UART_RTS_PIN_IDX] = {
.default_gpio = U2RTS_GPIO_NUM,
.iomux_func = U2RTS_MUX_FUNC,
.input = 0,
.signal = U2RTS_OUT_IDX,
},
[SOC_UART_CTS_PIN_IDX] = {
.default_gpio = U2CTS_GPIO_NUM,
.iomux_func = U2CTS_MUX_FUNC,
.input = 1,
.signal = U2CTS_IN_IDX,
}
},
.irq = ETS_UART2_INTR_SOURCE,
.module = PERIPH_UART2_MODULE,
},
}
};