ci(build): fixed/ignored warnings from unknown symbols in sdkconfig.defaults

examples/protocols/esp_http_client/sdkconfig.ci.ssldyn

@@ -9,7 +9,6 @@ CONFIG_EXAMPLE_ETH_PHY_ADDR=1
 CONFIG_EXAMPLE_CONNECT_IPV6=y
 CONFIG_ESP_HTTP_CLIENT_ENABLE_BASIC_AUTH=y
 CONFIG_MBEDTLS_DYNAMIC_BUFFER=y
-CONFIG_MBEDTLS_DYNAMIC_FREE_PEER_CERT=y
 CONFIG_MBEDTLS_DYNAMIC_FREE_CONFIG_DATA=y
 CONFIG_MBEDTLS_DHM_C=y
 CONFIG_EXAMPLE_HTTP_ENDPOINT="httpbin.espressif.cn"

examples/protocols/http_server/restful_server/sdkconfig.defaults

@@ -1,6 +1,5 @@
 CONFIG_HTTPD_MAX_REQ_HDR_LEN=1024
 CONFIG_SPIFFS_OBJ_NAME_LEN=64
-CONFIG_FATFS_LONG_FILENAME=y
 CONFIG_FATFS_LFN_HEAP=y
 CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
 CONFIG_PARTITION_TABLE_CUSTOM=y

examples/protocols/https_request/sdkconfig.ci.mbedtls_config

@@ -37,10 +37,7 @@ CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA=n
 # end of TLS Key Exchange Methods
 
 CONFIG_MBEDTLS_SSL_RENEGOTIATION=n
-CONFIG_MBEDTLS_SSL_PROTO_SSL3=n
 CONFIG_MBEDTLS_SSL_PROTO_DTLS=n
-CONFIG_MBEDTLS_SSL_PROTO_TLS1=n
-CONFIG_MBEDTLS_SSL_PROTO_TLS1_1=n
 
 CONFIG_MBEDTLS_SSL_ALPN=n
 CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS=n
@@ -52,9 +49,6 @@ CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS=n
 CONFIG_MBEDTLS_AES_C=n
 CONFIG_MBEDTLS_CAMELLIA_C=n
 CONFIG_MBEDTLS_DES_C=n
-CONFIG_MBEDTLS_RC4_DISABLED=n
-CONFIG_MBEDTLS_RC4_ENABLED_NO_DEFAULT=n
-CONFIG_MBEDTLS_RC4_ENABLED=n
 CONFIG_MBEDTLS_BLOWFISH_C=n
 CONFIG_MBEDTLS_XTEA_C=n
 CONFIG_MBEDTLS_CCM_C=n
@@ -94,5 +88,4 @@ CONFIG_MBEDTLS_CHACHA20_C=n
 CONFIG_MBEDTLS_HKDF_C=n
 CONFIG_MBEDTLS_THREADING_C=n
 CONFIG_MBEDTLS_LARGE_KEY_SOFTWARE_MPI=n
-CONFIG_MBEDTLS_SECURITY_RISKS=n
 # end of mbedTLS

examples/protocols/https_request/sdkconfig.ci.ssldyn

@@ -10,5 +10,4 @@ CONFIG_EXAMPLE_ETH_PHY_RST_GPIO=5
 CONFIG_EXAMPLE_ETH_PHY_ADDR=1
 CONFIG_EXAMPLE_CONNECT_IPV6=y
 CONFIG_MBEDTLS_DYNAMIC_BUFFER=y
-CONFIG_MBEDTLS_DYNAMIC_FREE_PEER_CERT=y
 CONFIG_MBEDTLS_DYNAMIC_FREE_CONFIG_DATA=y

examples/protocols/https_x509_bundle/sdkconfig.ci.ssldyn

@@ -2,7 +2,6 @@ CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_NONE=y
 CONFIG_MBEDTLS_CUSTOM_CERTIFICATE_BUNDLE=y
 CONFIG_MBEDTLS_CUSTOM_CERTIFICATE_BUNDLE_PATH="certs"
 CONFIG_MBEDTLS_DYNAMIC_BUFFER=y
-CONFIG_MBEDTLS_DYNAMIC_FREE_PEER_CERT=y
 CONFIG_MBEDTLS_DYNAMIC_FREE_CONFIG_DATA=y
 
 CONFIG_EXAMPLE_CONNECT_ETHERNET=y

examples/storage/semihost_vfs/sdkconfig.defaults

@@ -1,2 +1,2 @@
 # need this to detect that OpenOCD is connected
-CONFIG_ESP32_DEBUG_OCDAWARE=y
+CONFIG_ESP_DEBUG_OCDAWARE=y

examples/system/.build-test-rules.yml

@@ -185,6 +185,7 @@ examples/system/ota/simple_ota_example:
     - if: IDF_TARGET in ["esp32h2", "esp32p4"]
       temporary: true
       reason: target esp32h2, esp32p4 is not supported yet
+    - if: CONFIG_NAME == "spiram" and SOC_SPIRAM_SUPPORTED != 1
   disable_test:
     - if: IDF_TARGET == "esp32c2" or IDF_TARGET == "esp32c6"
       temporary: true

examples/system/efuse/sdkconfig.ci.virt_sb_v2_and_fe.esp32c3

@@ -4,7 +4,6 @@ CONFIG_IDF_TARGET="esp32c3"
 
 # ESP32C3 supports SECURE_BOOT_V2 only in ECO3
 CONFIG_ESP32C3_REV_MIN_3=y
-CONFIG_ESP32C3_REV_MIN=3
 
 CONFIG_PARTITION_TABLE_OFFSET=0xD000
 CONFIG_PARTITION_TABLE_CUSTOM=y

examples/system/efuse/sdkconfig.ci.virt_secure_boot_v2.esp32c3

@@ -4,7 +4,6 @@ CONFIG_IDF_TARGET="esp32c3"
 
 # ESP32C3 supports SECURE_BOOT_V2 only in ECO3
 CONFIG_ESP32C3_REV_MIN_3=y
-CONFIG_ESP32C3_REV_MIN=3
 
 CONFIG_PARTITION_TABLE_OFFSET=0xC000
 CONFIG_PARTITION_TABLE_CUSTOM=y

examples/system/ulp/lp_core/gpio/sdkconfig.defaults

@@ -1,6 +1,6 @@
 # Enable ULP
 CONFIG_ULP_COPROC_ENABLED=y
-CONFIG_ULP_COPROC_LP_CORE=y
+CONFIG_ULP_COPROC_TYPE_LP_CORE=y
 CONFIG_ULP_COPROC_RESERVE_MEM=4096
 # Set log level to Warning to produce clean output
 CONFIG_BOOTLOADER_LOG_LEVEL_WARN=y

examples/system/ulp/ulp_riscv/uart_print/sdkconfig.defaults

@@ -1,6 +1,6 @@
 # Enable ULP
 CONFIG_ULP_COPROC_ENABLED=y
-CONFIG_ULP_COPROC_RISCV=y
+CONFIG_ULP_COPROC_TYPE_RISCV=y
 CONFIG_ULP_COPROC_RESERVE_MEM=4096
 # Set log level to Warning to produce clean output
 CONFIG_BOOTLOADER_LOG_LEVEL_WARN=y