docs: update get-started documents for ESP32-C5

docs/zh_CN/get-started/esp32c5_output_log.inc

@@ -2,4 +2,40 @@
 
 .. code-block:: none
 
-    To be updated for C5
+    ...
+    esptool.py --chip esp32c5 -p /dev/ttyUSB0 -b 460800 --before=default_reset --after=hard_reset --no-stub write_flash --flash_mode dio --flash_freq 80m --flash_size 2MB 0x2000 bootloader/bootloader.bin 0x10000 hello_world.bin 0x8000 partition_table/partition-table.bin
+    esptool.py v4.9.dev6
+    Serial port /dev/ttyUSB0
+    Connecting....
+    Chip is ESP32-C5 (revision v1.0)
+    Features: WiFi 6, BT 5, IEEE802.15.4
+    Crystal is 48MHz
+    MAC: 30:ed:a0:ff:fe:e0:af:38
+    BASE MAC: 30:ed:a0:e0:af:38
+    MAC_EXT: ff:fe
+    ROM expects crystal freq: 48 MHz, detected 48 MHz
+    Changing baud rate to 460800
+    Changed.
+    Enabling default SPI flash mode...
+    Configuring flash size...
+    Flash will be erased from 0x00002000 to 0x00007fff...
+    Flash will be erased from 0x00010000 to 0x00034fff...
+    Flash will be erased from 0x00008000 to 0x00008fff...
+    Erasing flash...
+    Took 0.09s to erase flash block
+    Writing at 0x00007400... (100 %)
+    Wrote 22528 bytes at 0x00002000 in 0.7 seconds (276.3 kbit/s)...
+    Hash of data verified.
+    Erasing flash...
+    Took 0.37s to erase flash block
+    Writing at 0x00034c00... (100 %)
+    Wrote 151552 bytes at 0x00010000 in 4.4 seconds (275.6 kbit/s)...
+    Hash of data verified.
+    Erasing flash...
+    Took 0.02s to erase flash block
+    Writing at 0x00008800... (100 %)
+    Wrote 3072 bytes at 0x00008000 in 0.1 seconds (281.8 kbit/s)...
+    Hash of data verified.
+
+    Leaving...
+    Hard resetting via RTS pin...