docs: move the output log of targets to .inc files

docs/zh_CN/get-started/esp32c2_output_log.inc

@@ -0,0 +1,41 @@
+.. output_log
+
+.. code-block:: none
+
+    ...
+    esptool.py esp32c2 -p /dev/ttyUSB0 -b 460800 --before=default_reset --after=hard_reset write_flash --flash_mode dio --flash_freq 60m --flash_size 2MB 0x0 bootloader/bootloader.bin 0x10000 hello_world.bin 0x8000 partition_table/partition-table.bin
+    esptool.py v3.3.1
+    Serial port /dev/ttyUSB0
+    Connecting....
+    Chip is ESP32-C2 (revision 1)
+    Features: Wi-Fi
+    Crystal is 40MHz
+    MAC: 10:97:bd:f0:e5:0c
+    Uploading stub...
+    Running stub...
+    Stub running...
+    Changing baud rate to 460800
+    Changed.
+    Configuring flash size...
+    Flash will be erased from 0x00000000 to 0x00004fff...
+    Flash will be erased from 0x00010000 to 0x0002ffff...
+    Flash will be erased from 0x00008000 to 0x00008fff...
+    Compressed 18192 bytes to 10989...
+    Writing at 0x00000000... (100 %)
+    Wrote 18192 bytes (10989 compressed) at 0x00000000 in 0.6 seconds (effective 248.5 kbit/s)...
+    Hash of data verified.
+    Compressed 128640 bytes to 65895...
+    Writing at 0x00010000... (20 %)
+    Writing at 0x00019539... (40 %)
+    Writing at 0x00020bf2... (60 %)
+    Writing at 0x00027de1... (80 %)
+    Writing at 0x0002f480... (100 %)
+    Wrote 128640 bytes (65895 compressed) at 0x00010000 in 1.7 seconds (effective 603.0 kbit/s)...
+    Hash of data verified.
+    Compressed 3072 bytes to 103...
+    Writing at 0x00008000... (100 %)
+    Wrote 3072 bytes (103 compressed) at 0x00008000 in 0.1 seconds (effective 360.1 kbit/s)...
+    Hash of data verified.
+
+    Leaving...
+    Hard resetting via RTS pin...