docs: move the output log of targets to .inc files

docs/zh_CN/get-started/esp32c3_output_log.inc

@@ -0,0 +1,39 @@
+.. output_log
+
+.. code-block:: none
+
+    ...
+    esptool.py --chip esp32c3 -p /dev/ttyUSB0 -b 460800 --before=default_reset --after=hard_reset write_flash --flash_mode dio --flash_freq 80m --flash_size 2MB 0x8000 partition_table/partition-table.bin 0x0 bootloader/bootloader.bin 0x10000 hello_world.bin
+    esptool.py v3.0
+    Serial port /dev/ttyUSB0
+    Connecting....
+    Chip is ESP32-C3
+    Features: Wi-Fi
+    Crystal is 40MHz
+    MAC: 7c:df:a1:40:02:a4
+    Uploading stub...
+    Running stub...
+    Stub running...
+    Changing baud rate to 460800
+    Changed.
+    Configuring flash size...
+    Compressed 3072 bytes to 103...
+    Writing at 0x00008000... (100 %)
+    Wrote 3072 bytes (103 compressed) at 0x00008000 in 0.0 seconds (effective 4238.1 kbit/s)...
+    Hash of data verified.
+    Compressed 18960 bytes to 11311...
+    Writing at 0x00000000... (100 %)
+    Wrote 18960 bytes (11311 compressed) at 0x00000000 in 0.3 seconds (effective 584.9 kbit/s)...
+    Hash of data verified.
+    Compressed 145520 bytes to 71984...
+    Writing at 0x00010000... (20 %)
+    Writing at 0x00014000... (40 %)
+    Writing at 0x00018000... (60 %)
+    Writing at 0x0001c000... (80 %)
+    Writing at 0x00020000... (100 %)
+    Wrote 145520 bytes (71984 compressed) at 0x00010000 in 2.3 seconds (effective 504.4 kbit/s)...
+    Hash of data verified.
+
+    Leaving...
+    Hard resetting via RTS pin...
+    Done