bootloader: Add factory reset and start test app

Added feature:
- reset firmware to Factory app.(by long pressing of the button)
- boot Test app. (by long pressing of the button)
- Added feature erase data partitions from factory reset.

TW10281
TW10280

components/bootloader_support/include/bootloader_common.h

@@ -13,6 +13,14 @@
 // limitations under the License.
 
 #pragma once
+#include "esp_flash_data_types.h"
+
+/// Type of hold a GPIO in low state
+typedef enum {
+    GPIO_LONG_HOLD  = 1,    /*!< The long hold GPIO */
+    GPIO_SHORT_HOLD = -1,   /*!< The short hold GPIO */
+    GPIO_NOT_HOLD   = 0     /*!< If the GPIO input is not low */
+} esp_comm_gpio_hold_t;
 
 /**
  * @brief Calculate crc for the OTA data partition.
@@ -29,3 +37,34 @@ uint32_t bootloader_common_ota_select_crc(const esp_ota_select_entry_t *s);
  * @return    Returns true on valid, false otherwise.
  */
 bool bootloader_common_ota_select_valid(const esp_ota_select_entry_t *s);
+
+/**
+ * @brief Check if the GPIO input is a long hold or a short hold.
+ *
+ * Number of the GPIO input will be configured as an input with internal pull-up enabled.
+ * If the GPIO input is held low continuously for delay_sec period then it is a long hold.
+ * If the GPIO input is held low for less period then it is a short hold.
+ *
+ * @param[in] num_pin Number of the GPIO input.
+ * @param[in] delay_sec Input must be driven low for at least this long, continuously.
+ * @return esp_comm_gpio_hold_t Defines type of hold a GPIO in low state.
+ */
+esp_comm_gpio_hold_t bootloader_common_check_long_hold_gpio(uint32_t num_pin, uint32_t delay_sec);
+
+/**
+ * @brief Erase the partition data that is specified in the transferred list.
+ *
+ * @param[in] list_erase String containing a list of cleared partitions. Like this "nvs, phy". The string must be null-terminal.
+ * @param[in] ota_data_erase If true then the OTA data partition will be cleared (if there is it in partition table).
+ * @return    Returns true on success, false otherwise.
+ */
+bool bootloader_common_erase_part_type_data(const char *list_erase, bool ota_data_erase);
+
+/**
+ * @brief Determines if the list contains the label
+ *
+ * @param[in] list  A string of names delimited by commas or spaces. Like this "nvs, phy, data". The string must be null-terminated.
+ * @param[in] label The substring that will be searched in the list.
+ * @return    Returns true if the list contains the label, false otherwise.
+ */
+bool bootloader_common_label_search(const char *list, char *label);