mirror of
https://github.com/espressif/esp-idf.git
synced 2025-08-10 04:43:33 +00:00
efuse: Fix len of SOFT_DIS_JTAG for esp32c3 and esp32h2
This commit is contained in:
@@ -9,7 +9,7 @@
|
||||
#include <assert.h>
|
||||
#include "esp_efuse_table.h"
|
||||
|
||||
// md5_digest_table aa238a3a131bf64a9386d3d4ce86a237
|
||||
// md5_digest_table 54e3ee07e1f682ea20e8af0561df669c
|
||||
// This file was generated from the file esp_efuse_table.csv. DO NOT CHANGE THIS FILE MANUALLY.
|
||||
// If you want to change some fields, you need to change esp_efuse_table.csv file
|
||||
// then run `efuse_common_table` or `efuse_custom_table` command it will generate this file.
|
||||
@@ -192,7 +192,7 @@ static const esp_efuse_desc_t JTAG_SEL_ENABLE[] = {
|
||||
};
|
||||
|
||||
static const esp_efuse_desc_t SOFT_DIS_JTAG[] = {
|
||||
{EFUSE_BLK0, 48, 2}, // Set these bits to disable JTAG in the soft way (odd number 1 means disable). JTAG can be enabled in HMAC module.,
|
||||
{EFUSE_BLK0, 48, 3}, // Set these bits to disable JTAG in the soft way (odd number 1 means disable). JTAG can be enabled in HMAC module.,
|
||||
};
|
||||
|
||||
static const esp_efuse_desc_t DIS_PAD_JTAG[] = {
|
||||
|
@@ -60,7 +60,7 @@
|
||||
DIS_USB, EFUSE_BLK0, 45, 1, Disable USB function
|
||||
DIS_CAN, EFUSE_BLK0, 46, 1, Disable CAN function
|
||||
JTAG_SEL_ENABLE, EFUSE_BLK0, 47, 1, Set this bit to enable selection between usb_to_jtag and pad_to_jtag through strapping gpio10 when both reg_dis_usb_jtag and reg_dis_pad_jtag are equal to 0.
|
||||
SOFT_DIS_JTAG, EFUSE_BLK0, 48, 2, Set these bits to disable JTAG in the soft way (odd number 1 means disable). JTAG can be enabled in HMAC module.
|
||||
SOFT_DIS_JTAG, EFUSE_BLK0, 48, 3, Set these bits to disable JTAG in the soft way (odd number 1 means disable). JTAG can be enabled in HMAC module.
|
||||
DIS_PAD_JTAG, EFUSE_BLK0, 51, 1, Disable JTAG in the hard way. JTAG is disabled permanently.
|
||||
DIS_DOWNLOAD_MANUAL_ENCRYPT, EFUSE_BLK0, 52, 1, Disable flash encryption when in download boot modes.
|
||||
USB_DREFH, EFUSE_BLK0, 53, 2, Controls single-end input threshold vrefh 1.76 V to 2 V with step of 80 mV stored in eFuse.
|
||||
|
Can't render this file because it contains an unexpected character in line 7 and column 87.
|
@@ -9,7 +9,7 @@ extern "C" {
|
||||
#endif
|
||||
|
||||
|
||||
// md5_digest_table aa238a3a131bf64a9386d3d4ce86a237
|
||||
// md5_digest_table 54e3ee07e1f682ea20e8af0561df669c
|
||||
// This file was generated from the file esp_efuse_table.csv. DO NOT CHANGE THIS FILE MANUALLY.
|
||||
// If you want to change some fields, you need to change esp_efuse_table.csv file
|
||||
// then run `efuse_common_table` or `efuse_custom_table` command it will generate this file.
|
||||
|
Reference in New Issue
Block a user