spi_flash_test: remove threshold from unit test

components/idf_test/include/esp32/idf_performance_target.h

@@ -33,87 +33,6 @@
 #define IDF_PERFORMANCE_MAX_SPI_PER_TRANS_NO_POLLING                            30
 #define IDF_PERFORMANCE_MAX_SPI_PER_TRANS_NO_POLLING_NO_DMA                     27
 
-/*
- * Flash Performance value
- * 4 subsections: legacy, normal (new driver after v4.0), SPI1 (external but on SPI1), external (SPI2)
- * These thresholds are set to about 70% of the average test data, under certain condition.
- * Contact Espressif for details.
- */
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_WR_4B
-//The single_core config is much faster than other configs. Use the value of other configs
-//Collect data and correct it later
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_WR_4B               0
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_RD_4B
-//The single_core config is much faster than other configs. Use the value of other configs
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_RD_4B               35300
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_WR_2KB
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_WR_2KB              (697*1000)
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_RD_2KB
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_RD_2KB              (6780*1000)
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_ERASE
-//erase performance is highly depending on the chip vendor. Use 70% of the minimal value.
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_ERASE               11200
-#endif
-
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_WR_4B
-//The single_core config is much faster than other configs. Use the value of other configs
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_WR_4B                      20100
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_RD_4B
-//The single_core config is much faster than other configs. Use the value of other configs
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_RD_4B                      35200
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_WR_2KB
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_WR_2KB                     (754*1000)
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_RD_2KB
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_RD_2KB                     (6650*1000)
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_ERASE
-//erase performance is highly depending on the chip vendor. Use 70% of the minimal value.
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_ERASE                      45300
-#endif
-
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_WR_4B
-//The single_core config is much faster than other configs. Use the value of other configs
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_WR_4B                 16200
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_RD_4B
-//The single_core config is much faster than other configs. Use the value of other configs
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_RD_4B                 33600
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_WR_2KB
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_WR_2KB                (484*1000)
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_RD_2KB
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_RD_2KB                (1512*1000)
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_ERASE
-//erase performance is highly depending on the chip vendor. Use 70% of the minimal value.
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_ERASE                 49600
-#endif
-
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_WR_4B
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_WR_4B                  73500
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_RD_4B
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_RD_4B                  (261*1000)
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_WR_2KB
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_WR_2KB                 (470*1000)
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_RD_2KB
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_RD_2KB                 (261*1000)
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_ERASE
-//erase performance is highly depending on the chip vendor. Use 70% of the minimal value.
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_ERASE                  30900
-#endif
-
 // floating point instructions per divide and per sqrt (configured for worst-case with PSRAM workaround)
 #define IDF_PERFORMANCE_MAX_CYCLES_PER_DIV                                      70
 #define IDF_PERFORMANCE_MAX_CYCLES_PER_SQRT                                     140

components/idf_test/include/esp32c3/idf_performance_target.h

@@ -29,85 +29,6 @@
 #define IDF_PERFORMANCE_MAX_SPI_PER_TRANS_NO_POLLING                            32
 #define IDF_PERFORMANCE_MAX_SPI_PER_TRANS_NO_POLLING_NO_DMA                     30
 
-/*
- * Flash Performance value
- * 4 subsections: legacy, normal (new driver after v4.0), SPI1 (external but on SPI1), external (SPI2)
- * These thresholds are set to about 70% of the average test data, under certain condition.
- * Contact Espressif for details.
- */
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_WR_4B
-// rom options is much slower. use its 70%
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_WR_4B               42200
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_RD_4B
-// legacy & suspend config are much faster. use the 70% of slower configs
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_RD_4B               (179*1000)
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_WR_2KB
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_WR_2KB              (622*1000)
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_RD_2KB
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_RD_2KB              (6536*1000)
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_ERASE
-//erase performance is highly depending on the chip vendor. Use 70% of the minimal value.
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_ERASE               23700
-#endif
-
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_WR_4B
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_WR_4B                      46400
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_RD_4B
-// legacy & suspend config are much faster. use the 70% of slower configs
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_RD_4B                      (183*1000)
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_WR_2KB
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_WR_2KB                     (605*1000)
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_RD_2KB
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_RD_2KB                     (6676*1000)
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_ERASE
-//erase performance is highly depending on the chip vendor. Use 70% of the minimal value.
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_ERASE                      22900
-#endif
-
-// No SPI1 tests for C3
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_WR_4B
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_WR_4B                 0
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_RD_4B
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_RD_4B                 0
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_WR_2KB
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_WR_2KB                0
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_RD_2KB
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_RD_2KB                0
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_ERASE
-//erase performance is highly depending on the chip vendor. Use 70% of the minimal value.
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_ERASE                 0
-#endif
-
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_WR_4B
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_WR_4B                  43300
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_RD_4B
-// rom options is much slower. use its 70%
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_RD_4B                  99500
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_WR_2KB
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_WR_2KB                 (300*1000)
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_RD_2KB
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_RD_2KB                 (754*1000)
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_ERASE
-//erase performance is highly depending on the chip vendor. Use 70% of the minimal value.
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_ERASE                  33900
-#endif
-
 // floating point instructions per divide and per sqrt (configured for worst-case with PSRAM workaround)
 #define IDF_PERFORMANCE_MAX_CYCLES_PER_DIV                                      70
 #define IDF_PERFORMANCE_MAX_CYCLES_PER_SQRT                                     140

components/idf_test/include/esp32s2/idf_performance_target.h

@@ -25,82 +25,3 @@
 
 #define IDF_PERFORMANCE_MAX_SPI_PER_TRANS_NO_POLLING                            32
 #define IDF_PERFORMANCE_MAX_SPI_PER_TRANS_NO_POLLING_NO_DMA                     30
-
-/*
- * Flash Performance value
- * 4 subsections: legacy, normal (new driver after v4.0), SPI1 (external but on SPI1), external (SPI2)
- * These thresholds are set to about 70% of the average test data, under certain condition.
- * Contact Espressif for details.
- */
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_WR_4B
-//Great variation, use the 70% of min value
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_WR_4B               33300
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_RD_4B
-// legacy config is much faster. use the 70% of slower configs
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_RD_4B               (239*1000)
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_WR_2KB
-// Weird data. Use 70% average of slower configs.
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_WR_2KB              (546*1000)
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_RD_2KB
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_RD_2KB              (1191*1000)
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_ERASE
-//erase performance is highly depending on the chip vendor. Use 70% of the minimal value.
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_ERASE               19500
-#endif
-
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_WR_4B
-//release config is much faster than other configs. Use 70% average of other configs
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_WR_4B                      46300
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_RD_4B
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_RD_4B                      (249*1000)
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_WR_2KB
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_WR_2KB                     (851*1000)
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_RD_2KB
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_RD_2KB                     (11480*1000)
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_ERASE
-//erase performance is highly depending on the chip vendor. Use 70% of the minimal value.
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_ERASE                      40100
-#endif
-
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_WR_4B
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_WR_4B                 30500
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_RD_4B
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_RD_4B                 (183*1000)
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_WR_2KB
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_WR_2KB                (474*1000)
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_RD_2KB
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_RD_2KB                (1283*1000)
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_ERASE
-//erase performance is highly depending on the chip vendor. Use 70% of the minimal value.
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_ERASE                 44100
-#endif
-
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_WR_4B
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_WR_4B                  47800
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_RD_4B
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_RD_4B                  (252*1000)
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_WR_2KB
-// write with large RAM buffer tests has lower performance value than normal performance tests
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_WR_2KB                 (398*1000)
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_RD_2KB
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_RD_2KB                 (1204*1000)
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_ERASE
-//erase performance is highly depending on the chip vendor. Use 70% of the minimal value.
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_ERASE                  22100
-#endif

components/idf_test/include/esp32s3/idf_performance_target.h

@@ -24,82 +24,6 @@
 #define IDF_PERFORMANCE_MAX_SPI_PER_TRANS_NO_POLLING                            32
 #define IDF_PERFORMANCE_MAX_SPI_PER_TRANS_NO_POLLING_NO_DMA                     30
 
-/*
- * Flash Performance value
- * 4 subsections: legacy, normal (new driver after v4.0), SPI1 (external but on SPI1), external (SPI2)
- * These thresholds are set to about 70% of the average test data, under certain condition.
- * Contact Espressif for details.
- *
- * Currently all performance data on S3 are set to 0 for now. Update to a proper value later.
- */
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_WR_4B
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_WR_4B               0
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_RD_4B
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_RD_4B               0
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_WR_2KB
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_WR_2KB              0
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_RD_2KB
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_RD_2KB              0
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_ERASE
-//erase performance is highly depending on the chip vendor. Use 70% of the minimal value.
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_ERASE               0
-#endif
-
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_WR_4B
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_WR_4B                      0
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_RD_4B
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_RD_4B                      0
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_WR_2KB
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_WR_2KB                     0
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_RD_2KB
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_RD_2KB                     0
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_ERASE
-//erase performance is highly depending on the chip vendor. Use 70% of the minimal value.
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_ERASE                      0
-#endif
-
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_WR_4B
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_WR_4B                 0
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_RD_4B
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_RD_4B                 0
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_WR_2KB
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_WR_2KB                0
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_RD_2KB
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_RD_2KB                0
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_ERASE
-//erase performance is highly depending on the chip vendor. Use 70% of the minimal value.
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_ERASE                 0
-#endif
-
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_WR_4B
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_WR_4B                  0
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_RD_4B
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_RD_4B                  0
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_WR_2KB
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_WR_2KB                 0
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_RD_2KB
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_RD_2KB                 0
-#endif
-#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_ERASE
-//erase performance is highly depending on the chip vendor. Use 70% of the minimal value.
-#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_ERASE                  0
-#endif
-
 // floating point instructions per divide and per sqrt (configured for worst-case with PSRAM workaround)
 #define IDF_PERFORMANCE_MAX_CYCLES_PER_DIV                                      70
 #define IDF_PERFORMANCE_MAX_CYCLES_PER_SQRT                                     140

components/spi_flash/test/test_esp_flash.c

@@ -1044,6 +1044,37 @@ static uint32_t measure_read(const char* name, const esp_partition_t* part, uint
     return time_measure_end(&time_ctx);
 }
 
+static const char* get_chip_vendor(uint32_t id)
+{
+    switch (id)
+    {
+    case 0x20:
+        return "XMC";
+        break;
+    case 0x68:
+        return "BOYA";
+        break;
+    case 0xC8:
+        return "GigaDevice";
+        break;
+    case 0x9D:
+        return "ISSI";
+        break;
+    case 0xC2:
+        return "MXIC";
+        break;
+    case 0xEF:
+        return "Winbond";
+        break;
+    case 0xA1:
+        return "Fudan Micro";
+        break;
+    default:
+        break;
+    }
+    return "generic";
+}
+
 #define MEAS_WRITE(n)   (measure_write("write in "#n"-byte chunks", part, data_to_write, n))
 #define MEAS_READ(n)    (measure_read("read in "#n"-byte chunks", part, data_read, n))
 
@@ -1068,37 +1099,35 @@ static void test_flash_read_write_performance(const esp_partition_t *part)
 
     TEST_ASSERT_EQUAL_HEX8_ARRAY(data_to_write, data_read, total_len);
 
-#if !CONFIG_SPIRAM && !CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE
+#define LOG_DATA(bus, suffix, chip) IDF_LOG_PERFORMANCE("FLASH_SPEED_BYTE_PER_SEC_"#bus#suffix, "%d, flash_chip: %s", speed_##suffix, chip)
-#  define CHECK_DATA(bus, suffix) TEST_PERFORMANCE_CCOMP_GREATER_THAN(FLASH_SPEED_BYTE_PER_SEC_##bus##suffix, "%d", speed_##suffix)
+#define LOG_ERASE(bus, var, chip) IDF_LOG_PERFORMANCE("FLASH_SPEED_BYTE_PER_SEC_"#bus"ERASE", "%d, flash_chip: %s", var, chip)
-#  define CHECK_ERASE(bus, var) TEST_PERFORMANCE_CCOMP_GREATER_THAN(FLASH_SPEED_BYTE_PER_SEC_##bus##ERASE, "%d", var)
-#else
-#  define CHECK_DATA(bus, suffix) ((void)speed_##suffix)
-#  define CHECK_ERASE(bus, var)   ((void)var)
-#endif
 
 // Erase time may vary a lot, can increase threshold if this fails with a reasonable speed
-#define CHECK_PERFORMANCE(bus) do {\
+#define LOG_PERFORMANCE(bus, chip) do {\
-            CHECK_DATA(bus, WR_4B); \
+            LOG_DATA(bus, WR_4B, chip); \
-            CHECK_DATA(bus, RD_4B); \
+            LOG_DATA(bus, RD_4B, chip); \
-            CHECK_DATA(bus, WR_2KB); \
+            LOG_DATA(bus, WR_2KB, chip); \
-            CHECK_DATA(bus, RD_2KB); \
+            LOG_DATA(bus, RD_2KB, chip); \
-            CHECK_ERASE(bus, erase_1); \
+            LOG_ERASE(bus, erase_1, chip); \
-            CHECK_ERASE(bus, erase_2); \
+            LOG_ERASE(bus, erase_2, chip); \
         } while (0)
 
     spi_host_device_t host_id;
     int cs_id;
+    uint32_t id;
+    esp_flash_read_id(chip, &id);
+    const char *chip_name = get_chip_vendor(id >> 16);
 
     get_chip_host(chip, &host_id, &cs_id);
     if (host_id != SPI1_HOST) {
         // Chips on other SPI buses
-        CHECK_PERFORMANCE(EXT_);
+        LOG_PERFORMANCE(EXT_, chip_name);
     } else if (cs_id == 0) {
         // Main flash
-        CHECK_PERFORMANCE();
+        LOG_PERFORMANCE(,chip_name);
     } else {
         // Other cs pins on SPI1
-        CHECK_PERFORMANCE(SPI1_);
+        LOG_PERFORMANCE(SPI1_, chip_name);
     }
     free(data_to_write);
     free(data_read);

components/spi_flash/test/test_spi_flash.c

@@ -312,23 +312,17 @@ TEST_CASE("Test spi_flash read/write performance", "[spi_flash]")
 
     TEST_ASSERT_EQUAL_HEX8_ARRAY(data_to_write, data_read, total_len);
 
-// Data checks are disabled when PSRAM is used or in Freertos compliance check test
+#define LOG_DATA(suffix) IDF_LOG_PERFORMANCE("FLASH_SPEED_BYTE_PER_SEC_LEGACY_"#suffix, "%d", speed_##suffix)
-#if !CONFIG_SPIRAM && !CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE
+#define LOG_ERASE(var) IDF_LOG_PERFORMANCE("FLASH_SPEED_BYTE_PER_SEC_LEGACY_ERASE", "%d", var)
-#  define CHECK_DATA(suffix) TEST_PERFORMANCE_CCOMP_GREATER_THAN(FLASH_SPEED_BYTE_PER_SEC_LEGACY_##suffix, "%d", speed_##suffix)
-#  define CHECK_ERASE(var) TEST_PERFORMANCE_CCOMP_GREATER_THAN(FLASH_SPEED_BYTE_PER_SEC_LEGACY_ERASE, "%d", var)
-#else
-#  define CHECK_DATA(suffix) ((void)speed_##suffix)
-#  define CHECK_ERASE(var) ((void)var)
-#endif
 
-    CHECK_DATA(WR_4B);
+    LOG_DATA(WR_4B);
-    CHECK_DATA(RD_4B);
+    LOG_DATA(RD_4B);
-    CHECK_DATA(WR_2KB);
+    LOG_DATA(WR_2KB);
-    CHECK_DATA(RD_2KB);
+    LOG_DATA(RD_2KB);
 
     // Erase time may vary a lot, can increase threshold if this fails with a reasonable speed
-    CHECK_ERASE(erase_1);
+    LOG_ERASE(erase_1);
-    CHECK_ERASE(erase_2);
+    LOG_ERASE(erase_2);
 
     free(data_to_write);
     free(data_read);