spi_flash: refactor spi_flash.h to esp_rom_spiflash.h but keep the content in spi_flash.h

components/bootloader_support/include/bootloader_flash_override.h

@@ -1,101 +0,0 @@
-/*
- * SPDX-FileCopyrightText: 2020-2021 Espressif Systems (Shanghai) CO LTD
- *
- * SPDX-License-Identifier: Apache-2.0
- */
-#pragma once
-
-#include "esp_err.h"
-#include "esp_attr.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef unsigned (*bootloader_flash_read_status_fn_t)(void);
-typedef void (*bootloader_flash_write_status_fn_t)(unsigned);
-
-typedef struct __attribute__((packed))
-{
-    const char *manufacturer;
-    uint8_t mfg_id; /* 8-bit JEDEC manufacturer ID */
-    uint16_t flash_id; /* 16-bit JEDEC flash chip ID */
-    uint16_t id_mask; /* Bits to match on in flash chip ID */
-    bootloader_flash_read_status_fn_t read_status_fn;
-    bootloader_flash_write_status_fn_t write_status_fn;
-    uint8_t status_qio_bit;
-} bootloader_qio_info_t;
-
-/**
- * @brief Read 8 bit status using RDSR command
- *
- * @return Value of SR1.
- */
-unsigned bootloader_read_status_8b_rdsr(void);
-
-/**
- * @brief Read 8 bit status (second byte) using RDSR2 command
- *
- * @return Value of SR2
- */
-unsigned bootloader_read_status_8b_rdsr2(void);
-
-/**
- * @brief Read 16 bit status using RDSR & RDSR2 (low and high bytes)
- *
- * @return Value of SR2#SR1.
- */
-unsigned bootloader_read_status_16b_rdsr_rdsr2(void);
-
-/**
- * @brief Write 8 bit status using WRSR
- */
-void bootloader_write_status_8b_wrsr(unsigned new_status);
-
-/**
- * @brief Write 8 bit status (second byte) using WRSR2.
- */
-void bootloader_write_status_8b_wrsr2(unsigned new_status);
-
-/**
- * @brief Write 16 bit status using WRSR, (both write SR1 and SR2)
- */
-void bootloader_write_status_16b_wrsr(unsigned new_status);
-
-/**
- * @brief Read 8 bit status of XM25QU64A.
- *
- * @return Value of 8 bit SR.
- */
-unsigned bootloader_read_status_8b_xmc25qu64a(void);
-
-/**
- * @brief Write 8 bit status for XM25QU64A
- */
-void bootloader_write_status_8b_xmc25qu64a(unsigned new_status);
-
-/* Array of known flash chips and data to enable Quad I/O mode
-
-   Manufacturer & flash ID can be tested by running "esptool.py
-   flash_id"
-
-   If manufacturer ID matches, and flash ID ORed with flash ID mask
-   matches, enable_qio_mode() will execute "Read Cmd", test if bit
-   number "QIE Bit" is set, and if not set it will call "Write Cmd"
-   with this bit set.
-
-   Searching of this table stops when the first match is found.
- */
-extern const bootloader_qio_info_t __attribute__((weak)) bootloader_flash_qe_support_list[];
-
-/**
-  * @brief Unlock Flash write protect.
-  *        Please do not call this function in SDK.
-  *
-  * @note This can be overridden because it's attribute weak.
-  */
-esp_err_t IRAM_ATTR __attribute__((weak)) bootloader_flash_unlock(void);
-
-#ifdef __cplusplus
-}
-#endif