Merge branch 'feat/spi_std_timing_and_bit_trans' into 'master'

feat(driver_spi): support adjust master rx to standard timing

Closes IDF-11396

See merge request espressif/esp-idf!36058
This commit is contained in:
morris
2025-01-13 10:07:28 +08:00
20 changed files with 312 additions and 13 deletions

View File

@@ -689,6 +689,25 @@ static inline void spi_ll_master_keep_cs(spi_dev_t *hw, int keep_active)
/*------------------------------------------------------------------------------
* Configs: parameters
*----------------------------------------------------------------------------*/
/**
* Set the standard clock mode for master.
*
* @param hw Beginning address of the peripheral registers.
* @param enable_std True for std timing, False for half cycle delay sampling.
*/
static inline void spi_ll_master_set_rx_timing_mode(spi_dev_t *hw, spi_sampling_point_t sample_point)
{
//This is not supported
}
/**
* Get if standard clock mode is supported.
*/
static inline bool spi_ll_master_is_rx_std_sample_supported(void)
{
return false;
}
/**
* Set the clock for master by stored value.
*
@@ -726,7 +745,7 @@ static inline int spi_ll_freq_for_pre_n(int fapb, int pre, int n)
*/
static inline int spi_ll_master_cal_clock(int fapb, int hz, int duty_cycle, spi_ll_clock_val_t *out_reg)
{
typeof(GPSPI2.clock) reg;
typeof(GPSPI2.clock) reg = {.val = 0};
int eff_clk;
//In hw, n, h and l are 1-64, pre is 1-8K. Value written to register is one lower than used value.