alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2025-08-09 12:35:28 +00:00
Code Issues Packages Projects Releases Wiki Activity

feat(uart): support uart module sleep retention on c6/h2/p4

Browse Source
This commit is contained in:
Song Ruo Jing
2024-05-15 19:07:58 +08:00
parent 13e5b6f335
commit dca7c286d0
66 changed files with 707 additions and 277 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
components/hal/esp32c5/include/hal/gpio_ll.h
View File

@@ -427,6 +427,7 @@ static inline void gpio_ll_get_drive_capability(gpio_dev_t *hw, uint32_t gpio_nu
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number, only support output GPIOs
*/
__attribute__((always_inline))
static inline void gpio_ll_hold_en(gpio_dev_t *hw, uint32_t gpio_num)
{
LP_AON.gpio_hold0.gpio_hold0 |= GPIO_HOLD_MASK[gpio_num];
@@ -438,6 +439,7 @@ static inline void gpio_ll_hold_en(gpio_dev_t *hw, uint32_t gpio_num)
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number, only support output GPIOs
*/
__attribute__((always_inline))
static inline void gpio_ll_hold_dis(gpio_dev_t *hw, uint32_t gpio_num)
{
LP_AON.gpio_hold0.gpio_hold0 &= ~GPIO_HOLD_MASK[gpio_num];

6
components/hal/esp32c5/include/hal/uart_ll.h
View File

@@ -734,7 +734,7 @@ FORCE_INLINE_ATTR void uart_ll_set_tx_idle_num(uart_dev_t *hw, uint32_t idle_num
}
/**
* @brief Configure the transmiter to send break chars.
* @brief Configure the transmitter to send break chars.
*
* @param hw Beginning address of the peripheral registers.
* @param break_num The number of the break chars need to be send.
@@ -801,7 +801,7 @@ FORCE_INLINE_ATTR void uart_ll_get_hw_flow_ctrl(uart_dev_t *hw, uart_hw_flowcont
* @brief Configure the software flow control.
*
* @param hw Beginning address of the peripheral registers.
* @param flow_ctrl The UART sofware flow control settings.
* @param flow_ctrl The UART software flow control settings.
* @param sw_flow_ctrl_en Set true to enable software flow control, otherwise set it false.
*
* @return None.
@@ -1132,7 +1132,7 @@ FORCE_INLINE_ATTR bool uart_ll_is_hw_cts_en(uart_dev_t *hw)
* @brief Configure TX signal loop back to RX module, just for the testing purposes
*
* @param hw Beginning address of the peripheral registers.
* @param loop_back_en Set ture to enable the loop back function, else set it false.
* @param loop_back_en Set true to enable the loop back function, else set it false.
*
* @return None
*/