alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2025-11-26 12:50:30 +00:00
Code Issues Packages Projects Releases Wiki Activity

examples: change default build instructions in docs to CMake

Browse Source
This commit is contained in:
Mahavir Jain
2019-08-02 09:01:20 +05:30
parent 096b741a23
commit e7dba7d7bc
63 changed files with 136 additions and 137 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
examples/peripherals/adc/README.md
View File

@@ -16,7 +16,7 @@ In this example, we use `ADC_UNIT_1` by default, we need to connect a voltage so
### Configure the project
```
make menuconfig
idf.py menuconfig
```
* Set serial port under Serial Flasher Options.
@@ -26,7 +26,7 @@ make menuconfig
Build the project and flash it to the board, then run monitor tool to view serial output:
```
make -j4 flash monitor
idf.py -p PORT flash monitor
```
(To exit the serial monitor, type ``Ctrl-]``.)
@@ -48,7 +48,7 @@ Raw: 18 Voltage: 79mV
* program upload failure
* Hardware connection is not correct: run `idf.py monitor`, and reboot your board to see if there are any output logs.
* Hardware connection is not correct: run `idf.py -p PORT monitor`, and reboot your board to see if there are any output logs.
* The baud rate for downloading is too high: lower your baud rate in the `menuconfig` menu, and try again.
For any technical queries, please open an [issue](https://github.com/espressif/esp-idf/issues) on GitHub. We will get back to you soon.