alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2025-10-20 18:01:44 +00:00
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'doc/backport_iot_solution_link_updates_to_v4.3' into 'release/v4.3'

Browse Source 
fix dead links directed to ESP-IoT-Solution repo (backport v4.3)

See merge request espressif/esp-idf!13347
This commit is contained in:
Jiang Jiang Jian
2021-05-13 04:15:28 +00:00
parent 08c5b89096 819ac7f847
commit effee74b2f
10 changed files with 19 additions and 19 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
examples/ethernet/eth2ap/README.md
View File

@@ -1,5 +1,5 @@
# eth2ap Example
(See the README.md file in the upper level 'examples' directory for more information about examples. To try a more complex application about Ethernet to WiFi data forwarding, please go to [iot-solution](https://github.com/espressif/esp-iot-solution/tree/master/examples/eth2wifi).)
(See the README.md file in the upper level 'examples' directory for more information about examples. To try a more complex application about Ethernet to WiFi data forwarding, please go to [iot-solution](https://github.com/espressif/esp-iot-solution/tree/release/v1.0/examples/eth2wifi).)
**Note:** This example uses some internal APIs (e.g. `esp_wifi_internal_tx`) which might get changed between minor versions of ESP-IDF.

2
examples/peripherals/touch_pad_interrupt/README.md
View File

@@ -63,6 +63,6 @@ I (6194) Touch pad: TouchSensor [9] be inactived, status mask 0x0
For a simpler example how to configure and read capacitive touch pads, please refer to [touch_pad_read](../touch_pad_read).
Design and implementation of the touch sensor system is a complex process. The [Touch Sensor Application Note](https://github.com/espressif/esp-iot-solution/blob/master/documents/touch_pad_solution/touch_sensor_design_en.md) contains several ESP32 specific notes and comments to optimize the design and get the best out of the application with sensors controlled with the ESP32.
Design and implementation of the touch sensor system is a complex process. The [Touch Sensor Application Note](https://github.com/espressif/esp-iot-solution/blob/release/v1.0/documents/touch_pad_solution/touch_sensor_design_en.md) contains several ESP32 specific notes and comments to optimize the design and get the best out of the application with sensors controlled with the ESP32.
See the README.md file in the upper level 'examples' directory for more information about examples.

2
examples/peripherals/touch_pad_read/README.md
View File

@@ -43,7 +43,7 @@ T1: [6476] T2: [6508] T3: [6641] T4: [8919] T5: [9053] T6: [7190] T7: [7177] T8:
## Reference Information
For hardware and firmware design guidelines on ESP32 touch sensor system, please refer to [Touch Sensor Application Note](https://github.com/espressif/esp-iot-solution/blob/master/documents/touch_pad_solution/touch_sensor_design_en.md), where you may find comprehensive information on how to design and implement touch sensing applications, such as linear slider, wheel slider, matrix buttons and spring buttons.
For hardware and firmware design guidelines on ESP32 touch sensor system, please refer to [Touch Sensor Application Note](https://github.com/espressif/esp-iot-solution/blob/release/v1.0/documents/touch_pad_solution/touch_sensor_design_en.md), where you may find comprehensive information on how to design and implement touch sensing applications, such as linear slider, wheel slider, matrix buttons and spring buttons.
There is another similar example that demonstrates how to perform simple calibration and trigger an interrupt when a pat is touched - see [touch_pad_interrupt](../touch_pad_interrupt).

2
examples/system/deep_sleep/README.md
View File

@@ -23,7 +23,7 @@ This example should be able to run on any commonly available ESP32 development b
- **EXT1:** GPIO2 and GPIO4 should be connected to LOW to avoid floating pins. When triggering a wake up, connect one or both of the pins to HIGH. Note that floating pins may trigger a wake up.
- **Touch:** GPIO32, GPIO33 in ESP32 or GPIO9 in ESP32-S2 should be connected to touch sensors (see [Touch Sensor Application Note](https://github.com/espressif/esp-iot-solution/blob/master/documents/touch_pad_solution/touch_sensor_design_en.md)).
- **Touch:** GPIO32, GPIO33 in ESP32 or GPIO9 in ESP32-S2 should be connected to touch sensors (see [Touch Sensor Application Note](https://github.com/espressif/esp-iot-solution/blob/release/v1.0/documents/touch_pad_solution/touch_sensor_design_en.md)).
### Configure the project