mirror of
https://github.com/espressif/esp-idf.git
synced 2025-08-08 04:02:27 +00:00
feat(ble): Support BLE on esp32c5beta3
This commit is contained in:
Shen Weilong
@@ -0,0 +1,564 @@
|
||||
|
||||
menu "HCI Config"
|
||||
|
||||
choice BT_LE_HCI_INTERFACE
|
||||
prompt "Select HCI interface"
|
||||
default BT_LE_HCI_INTERFACE_USE_RAM
|
||||
|
||||
config BT_LE_HCI_INTERFACE_USE_RAM
|
||||
bool "ram"
|
||||
help
|
||||
Use RAM as HCI interface
|
||||
config BT_LE_HCI_INTERFACE_USE_UART
|
||||
bool "uart"
|
||||
help
|
||||
Use UART as HCI interface
|
||||
endchoice
|
||||
|
||||
config BT_LE_HCI_UART_PORT
|
||||
int "HCI UART port"
|
||||
depends on BT_LE_HCI_INTERFACE_USE_UART
|
||||
default 1
|
||||
help
|
||||
Set the port number of HCI UART
|
||||
|
||||
config BT_LE_HCI_UART_FLOWCTRL
|
||||
bool "HCI uart Hardware Flow ctrl"
|
||||
depends on BT_LE_HCI_INTERFACE_USE_UART
|
||||
default n
|
||||
|
||||
config BT_LE_HCI_UART_TX_PIN
|
||||
int "HCI uart Tx gpio"
|
||||
depends on BT_LE_HCI_INTERFACE_USE_UART
|
||||
default 19
|
||||
|
||||
config BT_LE_HCI_UART_RX_PIN
|
||||
int "HCI uart Rx gpio"
|
||||
depends on BT_LE_HCI_INTERFACE_USE_UART
|
||||
default 10
|
||||
|
||||
config BT_LE_HCI_UART_RTS_PIN
|
||||
int "HCI uart RTS gpio"
|
||||
depends on BT_LE_HCI_UART_FLOWCTRL
|
||||
default 4
|
||||
|
||||
config BT_LE_HCI_UART_CTS_PIN
|
||||
int "HCI uart CTS gpio"
|
||||
depends on BT_LE_HCI_UART_FLOWCTRL
|
||||
default 5
|
||||
|
||||
config BT_LE_HCI_UART_BAUD
|
||||
int "HCI uart baudrate"
|
||||
depends on BT_LE_HCI_INTERFACE_USE_UART
|
||||
default 921600
|
||||
help
|
||||
HCI uart baud rate 115200 ~ 1000000
|
||||
|
||||
choice BT_LE_HCI_UART_PARITY
|
||||
prompt "select uart parity"
|
||||
depends on BT_LE_HCI_INTERFACE_USE_UART
|
||||
default BT_LE_HCI_UART_UART_PARITY_DISABLE
|
||||
|
||||
config BT_LE_HCI_UART_UART_PARITY_DISABLE
|
||||
bool "PARITY_DISABLE"
|
||||
help
|
||||
UART_PARITY_DISABLE
|
||||
config BT_LE_HCI_UART_UART_PARITY_EVEN
|
||||
bool "PARITY_EVEN"
|
||||
help
|
||||
UART_PARITY_EVEN
|
||||
config BT_LE_HCI_UART_UART_PARITY_ODD
|
||||
bool "PARITY_ODD"
|
||||
help
|
||||
UART_PARITY_ODD
|
||||
endchoice
|
||||
|
||||
config BT_LE_HCI_UART_TASK_STACK_SIZE
|
||||
int "HCI uart task stack size"
|
||||
depends on BT_LE_HCI_INTERFACE_USE_UART
|
||||
default 1000
|
||||
help
|
||||
Set the size of uart task stack
|
||||
endmenu
|
||||
|
||||
config BT_LE_CONTROLLER_NPL_OS_PORTING_SUPPORT
|
||||
bool
|
||||
default y
|
||||
help
|
||||
Enable NPL porting for controller.
|
||||
|
||||
|
||||
menuconfig BT_LE_50_FEATURE_SUPPORT
|
||||
bool "Enable BLE 5 feature"
|
||||
depends on !BT_NIMBLE_ENABLED
|
||||
default y
|
||||
help
|
||||
Enable BLE 5 feature
|
||||
|
||||
config BT_LE_LL_CFG_FEAT_LE_2M_PHY
|
||||
bool "Enable 2M Phy"
|
||||
depends on BT_LE_50_FEATURE_SUPPORT
|
||||
default y
|
||||
help
|
||||
Enable 2M-PHY
|
||||
|
||||
config BT_LE_LL_CFG_FEAT_LE_CODED_PHY
|
||||
bool "Enable coded Phy"
|
||||
depends on BT_LE_50_FEATURE_SUPPORT
|
||||
default y
|
||||
help
|
||||
Enable coded-PHY
|
||||
|
||||
config BT_LE_EXT_ADV
|
||||
bool "Enable extended advertising"
|
||||
depends on BT_LE_50_FEATURE_SUPPORT
|
||||
default y
|
||||
help
|
||||
Enable this option to do extended advertising. Extended advertising
|
||||
will be supported from BLE 5.0 onwards.
|
||||
|
||||
if BT_LE_EXT_ADV
|
||||
config BT_LE_MAX_EXT_ADV_INSTANCES
|
||||
int "Maximum number of extended advertising instances."
|
||||
range 0 4
|
||||
default 1
|
||||
depends on BT_LE_EXT_ADV
|
||||
help
|
||||
Change this option to set maximum number of extended advertising
|
||||
instances. Minimum there is always one instance of
|
||||
advertising. Enter how many more advertising instances you
|
||||
want.
|
||||
Each extended advertising instance will take about 0.5k DRAM.
|
||||
|
||||
config BT_LE_EXT_ADV_MAX_SIZE
|
||||
int "Maximum length of the advertising data."
|
||||
range 0 1650
|
||||
default 1650
|
||||
depends on BT_LE_EXT_ADV
|
||||
help
|
||||
Defines the length of the extended adv data. The value should not
|
||||
exceed 1650.
|
||||
|
||||
config BT_LE_ENABLE_PERIODIC_ADV
|
||||
bool "Enable periodic advertisement."
|
||||
default y
|
||||
depends on BT_LE_EXT_ADV
|
||||
help
|
||||
Enable this option to start periodic advertisement.
|
||||
|
||||
config BT_LE_PERIODIC_ADV_SYNC_TRANSFER
|
||||
bool "Enable Transfer Sync Events"
|
||||
depends on BT_LE_ENABLE_PERIODIC_ADV
|
||||
default y
|
||||
help
|
||||
This enables controller transfer periodic sync events to host
|
||||
|
||||
endif
|
||||
|
||||
config BT_LE_MAX_PERIODIC_SYNCS
|
||||
int "Maximum number of periodic advertising syncs"
|
||||
depends on BT_LE_50_FEATURE_SUPPORT && !BT_NIMBLE_ENABLED
|
||||
|
||||
range 0 8
|
||||
default 1 if BT_LE_ENABLE_PERIODIC_ADV
|
||||
default 0
|
||||
help
|
||||
Set this option to set the upper limit for number of periodic sync
|
||||
connections. This should be less than maximum connections allowed by
|
||||
controller.
|
||||
|
||||
config BT_LE_MAX_PERIODIC_ADVERTISER_LIST
|
||||
int "Maximum number of periodic advertiser list"
|
||||
depends on BT_LE_50_FEATURE_SUPPORT && !BT_NIMBLE_ENABLED
|
||||
range 1 5
|
||||
default 5
|
||||
help
|
||||
Set this option to set the upper limit for number of periodic advertiser list.
|
||||
|
||||
config BT_LE_POWER_CONTROL_ENABLED
|
||||
bool "Enable controller support for BLE Power Control"
|
||||
depends on BT_LE_50_FEATURE_SUPPORT && !BT_NIMBLE_ENABLED && IDF_TARGET_ESP32C6
|
||||
default n
|
||||
help
|
||||
Set this option to enable the Power Control feature on controller
|
||||
|
||||
menu "Memory Settings"
|
||||
depends on !BT_NIMBLE_ENABLED
|
||||
|
||||
config BT_LE_MSYS_1_BLOCK_COUNT
|
||||
int "MSYS_1 Block Count"
|
||||
default 12
|
||||
help
|
||||
MSYS is a system level mbuf registry. For prepare write & prepare
|
||||
responses MBUFs are allocated out of msys_1 pool. For NIMBLE_MESH
|
||||
enabled cases, this block count is increased by 8 than user defined
|
||||
count.
|
||||
|
||||
config BT_LE_MSYS_1_BLOCK_SIZE
|
||||
int "MSYS_1 Block Size"
|
||||
default 256
|
||||
help
|
||||
Dynamic memory size of block 1
|
||||
|
||||
config BT_LE_MSYS_2_BLOCK_COUNT
|
||||
int "MSYS_2 Block Count"
|
||||
default 24
|
||||
help
|
||||
Dynamic memory count
|
||||
|
||||
config BT_LE_MSYS_2_BLOCK_SIZE
|
||||
int "MSYS_2 Block Size"
|
||||
default 320
|
||||
help
|
||||
Dynamic memory size of block 2
|
||||
|
||||
config BT_LE_MSYS_BUF_FROM_HEAP
|
||||
bool "Get Msys Mbuf from heap"
|
||||
default y
|
||||
depends on BT_LE_MSYS_INIT_IN_CONTROLLER
|
||||
help
|
||||
This option sets the source of the shared msys mbuf memory between
|
||||
the Host and the Controller. Allocate the memory from the heap if
|
||||
this option is sets, from the mempool otherwise.
|
||||
|
||||
config BT_LE_ACL_BUF_COUNT
|
||||
int "ACL Buffer count"
|
||||
default 10
|
||||
help
|
||||
The number of ACL data buffers.
|
||||
|
||||
config BT_LE_ACL_BUF_SIZE
|
||||
int "ACL Buffer size"
|
||||
default 517
|
||||
help
|
||||
This is the maximum size of the data portion of HCI ACL data packets.
|
||||
It does not include the HCI data header (of 4 bytes)
|
||||
|
||||
config BT_LE_HCI_EVT_BUF_SIZE
|
||||
int "HCI Event Buffer size"
|
||||
default 257 if BT_LE_EXT_ADV
|
||||
default 70
|
||||
help
|
||||
This is the size of each HCI event buffer in bytes. In case of
|
||||
extended advertising, packets can be fragmented. 257 bytes is the
|
||||
maximum size of a packet.
|
||||
|
||||
config BT_LE_HCI_EVT_HI_BUF_COUNT
|
||||
int "High Priority HCI Event Buffer count"
|
||||
default 30
|
||||
help
|
||||
This is the high priority HCI events' buffer size. High-priority
|
||||
event buffers are for everything except advertising reports. If there
|
||||
are no free high-priority event buffers then host will try to allocate a
|
||||
low-priority buffer instead
|
||||
|
||||
config BT_LE_HCI_EVT_LO_BUF_COUNT
|
||||
int "Low Priority HCI Event Buffer count"
|
||||
default 8
|
||||
help
|
||||
This is the low priority HCI events' buffer size. Low-priority event
|
||||
buffers are only used for advertising reports. If there are no free
|
||||
low-priority event buffers, then an incoming advertising report will
|
||||
get dropped
|
||||
endmenu
|
||||
|
||||
config BT_LE_CONTROLLER_TASK_STACK_SIZE
|
||||
int "Controller task stack size"
|
||||
default 5120 if BLE_MESH
|
||||
default 4096
|
||||
help
|
||||
This configures stack size of NimBLE controller task
|
||||
|
||||
menuconfig BT_LE_CONTROLLER_LOG_ENABLED
|
||||
bool "Controller log enable"
|
||||
default n
|
||||
help
|
||||
Enable controller log
|
||||
|
||||
config BT_LE_CONTROLLER_LOG_CTRL_ENABLED
|
||||
bool "enable controller log module"
|
||||
depends on BT_LE_CONTROLLER_LOG_ENABLED
|
||||
default y
|
||||
help
|
||||
Enable controller log module
|
||||
|
||||
config BT_LE_CONTROLLER_LOG_HCI_ENABLED
|
||||
bool "enable HCI log module"
|
||||
depends on BT_LE_CONTROLLER_LOG_ENABLED
|
||||
default y
|
||||
help
|
||||
Enable hci log module
|
||||
|
||||
config BT_LE_CONTROLLER_LOG_DUMP_ONLY
|
||||
bool "Controller log dump mode only"
|
||||
depends on BT_LE_CONTROLLER_LOG_ENABLED
|
||||
default y
|
||||
help
|
||||
Only operate in dump mode
|
||||
|
||||
config BT_LE_LOG_CTRL_BUF1_SIZE
|
||||
int "size of the first BLE controller LOG buffer"
|
||||
depends on BT_LE_CONTROLLER_LOG_ENABLED
|
||||
default 4096
|
||||
help
|
||||
Configure the size of the first BLE controller LOG buffer.
|
||||
|
||||
config BT_LE_LOG_CTRL_BUF2_SIZE
|
||||
int "size of the second BLE controller LOG buffer"
|
||||
depends on BT_LE_CONTROLLER_LOG_ENABLED
|
||||
default 1024
|
||||
help
|
||||
Configure the size of the second BLE controller LOG buffer.
|
||||
|
||||
config BT_LE_LOG_HCI_BUF_SIZE
|
||||
int "size of the BLE HCI LOG buffer"
|
||||
depends on BT_LE_CONTROLLER_LOG_ENABLED
|
||||
default 4096
|
||||
help
|
||||
Configure the size of the BLE HCI LOG buffer.
|
||||
|
||||
config BT_LE_LL_RESOLV_LIST_SIZE
|
||||
int "BLE LL Resolving list size"
|
||||
range 1 5
|
||||
default 4
|
||||
help
|
||||
Configure the size of resolving list used in link layer.
|
||||
|
||||
menuconfig BT_LE_SECURITY_ENABLE
|
||||
bool "Enable BLE SM feature"
|
||||
depends on !BT_NIMBLE_ENABLED
|
||||
default y
|
||||
help
|
||||
Enable BLE sm feature
|
||||
|
||||
config BT_LE_SM_LEGACY
|
||||
bool "Security manager legacy pairing"
|
||||
depends on BT_LE_SECURITY_ENABLE
|
||||
default y
|
||||
help
|
||||
Enable security manager legacy pairing
|
||||
|
||||
config BT_LE_SM_SC
|
||||
bool "Security manager secure connections (4.2)"
|
||||
depends on BT_LE_SECURITY_ENABLE
|
||||
default y
|
||||
help
|
||||
Enable security manager secure connections
|
||||
|
||||
config BT_LE_SM_SC_DEBUG_KEYS
|
||||
bool "Use predefined public-private key pair"
|
||||
default n
|
||||
depends on BT_LE_SECURITY_ENABLE && BT_LE_SM_SC
|
||||
help
|
||||
If this option is enabled, SM uses predefined DH key pair as described
|
||||
in Core Specification, Vol. 3, Part H, 2.3.5.6.1. This allows to
|
||||
decrypt air traffic easily and thus should only be used for debugging.
|
||||
|
||||
config BT_LE_LL_CFG_FEAT_LE_ENCRYPTION
|
||||
bool "Enable LE encryption"
|
||||
depends on BT_LE_SECURITY_ENABLE
|
||||
default y
|
||||
help
|
||||
Enable encryption connection
|
||||
|
||||
config BT_LE_CRYPTO_STACK_MBEDTLS
|
||||
bool "Override TinyCrypt with mbedTLS for crypto computations"
|
||||
default y
|
||||
depends on !BT_NIMBLE_ENABLED
|
||||
select MBEDTLS_ECP_RESTARTABLE
|
||||
select MBEDTLS_CMAC_C
|
||||
help
|
||||
Enable this option to choose mbedTLS instead of TinyCrypt for crypto
|
||||
computations.
|
||||
|
||||
config BT_LE_WHITELIST_SIZE
|
||||
int "BLE white list size"
|
||||
range 1 15
|
||||
default 12
|
||||
depends on !BT_NIMBLE_ENABLED
|
||||
|
||||
help
|
||||
BLE list size
|
||||
|
||||
config BT_LE_LL_DUP_SCAN_LIST_COUNT
|
||||
int "BLE duplicate scan list count"
|
||||
range 5 100
|
||||
default 20
|
||||
help
|
||||
config the max count of duplicate scan list
|
||||
|
||||
config BT_LE_LL_SCA
|
||||
int "BLE Sleep clock accuracy"
|
||||
range 0 500
|
||||
default 60
|
||||
help
|
||||
Sleep clock accuracy of our device (in ppm)
|
||||
|
||||
config BT_LE_MAX_CONNECTIONS
|
||||
int "Maximum number of concurrent connections"
|
||||
depends on !BT_NIMBLE_ENABLED
|
||||
range 1 70
|
||||
default 3
|
||||
help
|
||||
Defines maximum number of concurrent BLE connections. For ESP32, user
|
||||
is expected to configure BTDM_CTRL_BLE_MAX_CONN from controller menu
|
||||
along with this option. Similarly for ESP32-C3 or ESP32-S3, user is expected to
|
||||
configure BT_CTRL_BLE_MAX_ACT from controller menu.
|
||||
Each connection will take about 1k DRAM.
|
||||
|
||||
choice BT_LE_COEX_PHY_CODED_TX_RX_TLIM
|
||||
prompt "Coexistence: limit on MAX Tx/Rx time for coded-PHY connection"
|
||||
default BT_LE_COEX_PHY_CODED_TX_RX_TLIM_DIS
|
||||
depends on ESP_COEX_SW_COEXIST_ENABLE
|
||||
help
|
||||
When using PHY-Coded in BLE connection, limitation on max tx/rx time can be applied to
|
||||
better avoid dramatic performance deterioration of Wi-Fi.
|
||||
|
||||
config BT_LE_COEX_PHY_CODED_TX_RX_TLIM_EN
|
||||
bool "Force Enable"
|
||||
help
|
||||
Always enable the limitation on max tx/rx time for Coded-PHY connection
|
||||
|
||||
config BT_LE_COEX_PHY_CODED_TX_RX_TLIM_DIS
|
||||
bool "Force Disable"
|
||||
help
|
||||
Disable the limitation on max tx/rx time for Coded-PHY connection
|
||||
endchoice
|
||||
|
||||
config BT_LE_COEX_PHY_CODED_TX_RX_TLIM_EFF
|
||||
int
|
||||
default 0 if !ESP_COEX_SW_COEXIST_ENABLE
|
||||
default 1 if BT_LE_COEX_PHY_CODED_TX_RX_TLIM_EN
|
||||
default 0 if BT_LE_COEX_PHY_CODED_TX_RX_TLIM_DIS
|
||||
|
||||
config BT_LE_SLEEP_ENABLE
|
||||
bool "Enable BLE sleep"
|
||||
default n
|
||||
help
|
||||
Enable BLE sleep
|
||||
|
||||
choice BT_LE_LP_CLK_SRC
|
||||
prompt "BLE low power clock source"
|
||||
default BT_LE_LP_CLK_SRC_MAIN_XTAL
|
||||
config BT_LE_LP_CLK_SRC_MAIN_XTAL
|
||||
bool "Use main XTAL as RTC clock source"
|
||||
help
|
||||
User main XTAL as RTC clock source.
|
||||
This option is recommended if external 32.768k XTAL is not available.
|
||||
Using the external 32.768 kHz XTAL will have lower current consumption
|
||||
in light sleep compared to using the main XTAL.
|
||||
|
||||
config BT_LE_LP_CLK_SRC_DEFAULT
|
||||
bool "Use system RTC slow clock source"
|
||||
help
|
||||
Use the same slow clock source as system RTC
|
||||
Using any clock source other than external 32.768 kHz XTAL supports only
|
||||
legacy ADV and SCAN due to low clock accuracy.
|
||||
|
||||
endchoice
|
||||
|
||||
config BT_LE_USE_ESP_TIMER
|
||||
bool "Enable Esp Timer for Callout"
|
||||
depends on !BT_NIMBLE_ENABLED
|
||||
default y
|
||||
help
|
||||
Set this option to use Esp Timer which has higher priority timer
|
||||
instead of FreeRTOS timer
|
||||
config BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_SUPP
|
||||
bool "BLE adv report flow control supported"
|
||||
default y
|
||||
help
|
||||
The function is mainly used to enable flow control for advertising reports. When it is enabled,
|
||||
advertising reports will be discarded by the controller if the number of unprocessed advertising
|
||||
reports exceeds the size of BLE adv report flow control.
|
||||
|
||||
config BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_NUM
|
||||
int "BLE adv report flow control number"
|
||||
depends on BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_SUPP
|
||||
range 50 1000
|
||||
default 100
|
||||
help
|
||||
The number of unprocessed advertising report that bluetooth host can save.If you set
|
||||
`BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_NUM` to a small value, this may cause adv packets lost.
|
||||
If you set `BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_NUM` to a large value, bluetooth host may cache a
|
||||
lot of adv packets and this may cause system memory run out. For example, if you set
|
||||
it to 50, the maximum memory consumed by host is 35 * 50 bytes. Please set
|
||||
`BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_NUM` according to your system free memory and handle adv
|
||||
packets as fast as possible, otherwise it will cause adv packets lost.
|
||||
|
||||
config BT_CTRL_BLE_ADV_REPORT_DISCARD_THRSHOLD
|
||||
int "BLE adv lost event threshold value"
|
||||
depends on BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_SUPP
|
||||
range 1 1000
|
||||
default 20
|
||||
help
|
||||
When adv report flow control is enabled, The ADV lost event will be generated when the number
|
||||
of ADV packets lost in the controller reaches this threshold. It is better to set a larger value.
|
||||
If you set `BT_CTRL_BLE_ADV_REPORT_DISCARD_THRSHOLD` to a small value or printf every adv lost event, it
|
||||
may cause adv packets lost more.
|
||||
|
||||
config BT_LE_SCAN_DUPL
|
||||
bool "BLE Scan Duplicate Options"
|
||||
default y
|
||||
help
|
||||
This select enables parameters setting of BLE scan duplicate.
|
||||
|
||||
choice BT_LE_SCAN_DUPL_TYPE
|
||||
prompt "Scan Duplicate Type"
|
||||
default BT_LE_SCAN_DUPL_TYPE_DEVICE
|
||||
depends on BT_LE_SCAN_DUPL
|
||||
help
|
||||
Scan duplicate have three ways. one is "Scan Duplicate By Device Address", This way is to use
|
||||
advertiser address filtering. The adv packet of the same address is only allowed to be reported once.
|
||||
Another way is "Scan Duplicate By Device Address And Advertising Data". This way is to use advertising
|
||||
data and device address filtering. All different adv packets with the same address are allowed to be
|
||||
reported. The last way is "Scan Duplicate By Advertising Data". This way is to use advertising data
|
||||
filtering. All same advertising data only allow to be reported once even though they are from
|
||||
different devices.
|
||||
|
||||
config BT_LE_SCAN_DUPL_TYPE_DEVICE
|
||||
bool "Scan Duplicate By Device Address"
|
||||
help
|
||||
This way is to use advertiser address filtering. The adv packet of the same address is only
|
||||
allowed to be reported once
|
||||
|
||||
config BT_LE_SCAN_DUPL_TYPE_DATA
|
||||
bool "Scan Duplicate By Advertising Data"
|
||||
help
|
||||
This way is to use advertising data filtering. All same advertising data only allow to be reported
|
||||
once even though they are from different devices.
|
||||
|
||||
config BT_LE_SCAN_DUPL_TYPE_DATA_DEVICE
|
||||
bool "Scan Duplicate By Device Address And Advertising Data"
|
||||
help
|
||||
This way is to use advertising data and device address filtering. All different adv packets with
|
||||
the same address are allowed to be reported.
|
||||
endchoice
|
||||
|
||||
config BT_LE_SCAN_DUPL_TYPE
|
||||
int
|
||||
depends on BT_LE_SCAN_DUPL
|
||||
default 0 if BT_LE_SCAN_DUPL_TYPE_DEVICE
|
||||
default 1 if BT_LE_SCAN_DUPL_TYPE_DATA
|
||||
default 2 if BT_LE_SCAN_DUPL_TYPE_DATA_DEVICE
|
||||
default 0
|
||||
|
||||
config BT_LE_SCAN_DUPL_CACHE_REFRESH_PERIOD
|
||||
int "Duplicate scan list refresh period (seconds)"
|
||||
depends on BT_LE_SCAN_DUPL
|
||||
range 0 1000
|
||||
default 0
|
||||
help
|
||||
If the period value is non-zero, the controller will periodically clear the device information
|
||||
stored in the scan duuplicate filter. If it is 0, the scan duuplicate filter will not be cleared
|
||||
until the scanning is disabled. Duplicate advertisements for this period should not be sent to the
|
||||
Host in advertising report events.
|
||||
There are two scenarios where the ADV packet will be repeatedly reported:
|
||||
1. The duplicate scan cache is full, the controller will delete the oldest device information and
|
||||
add new device information.
|
||||
2. When the refresh period is up, the controller will clear all device information and start filtering
|
||||
again.
|
||||
|
||||
config BT_LE_MSYS_INIT_IN_CONTROLLER
|
||||
bool "Msys Mbuf Init in Controller"
|
||||
default y
|
||||
|
||||
1412
components/bt/controller/esp32c5/bt.c
Normal file
1412
components/bt/controller/esp32c5/bt.c
Normal file
File diff suppressed because it is too large
Load Diff
219
components/bt/controller/esp32c5/esp_bt_cfg.h
Normal file
219
components/bt/controller/esp32c5/esp_bt_cfg.h
Normal file
@@ -0,0 +1,219 @@
|
||||
/*
|
||||
* SPDX-FileCopyrightText: 2015-2024 Espressif Systems (Shanghai) CO LTD
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*/
|
||||
|
||||
#ifndef __ESP_BT_CFG_H__
|
||||
#define __ESP_BT_CFG_H__
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include "esp_err.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#if CONFIG_BT_NIMBLE_ENABLED
|
||||
#include "syscfg/syscfg.h"
|
||||
#endif
|
||||
|
||||
#define NIMBLE_LL_STACK_SIZE CONFIG_BT_LE_CONTROLLER_TASK_STACK_SIZE
|
||||
|
||||
#if CONFIG_BT_NIMBLE_ENABLED
|
||||
|
||||
#if CONFIG_BT_NIMBLE_LL_CFG_FEAT_LE_CODED_PHY
|
||||
#define BLE_LL_SCAN_PHY_NUMBER_N (2)
|
||||
#else
|
||||
#define BLE_LL_SCAN_PHY_NUMBER_N (1)
|
||||
#endif
|
||||
#define DEFAULT_BT_LE_MAX_PERIODIC_ADVERTISER_LIST MYNEWT_VAL(BLE_MAX_PERIODIC_ADVERTISER_LIST)
|
||||
#define DEFAULT_BT_LE_MAX_PERIODIC_SYNCS MYNEWT_VAL(BLE_MAX_PERIODIC_SYNCS)
|
||||
#define DEFAULT_BT_LE_MAX_CONNECTIONS MYNEWT_VAL(BLE_MAX_CONNECTIONS)
|
||||
#define DEFAULT_BT_LE_ACL_BUF_SIZE MYNEWT_VAL(BLE_TRANSPORT_ACL_SIZE)
|
||||
#define DEFAULT_BT_LE_ACL_BUF_COUNT MYNEWT_VAL(BLE_TRANSPORT_ACL_FROM_LL_COUNT)
|
||||
#define DEFAULT_BT_LE_HCI_EVT_BUF_SIZE MYNEWT_VAL(BLE_TRANSPORT_EVT_SIZE)
|
||||
#define DEFAULT_BT_LE_EXT_ADV_MAX_SIZE MYNEWT_VAL(BLE_EXT_ADV_MAX_SIZE)
|
||||
#define DEFAULT_BT_LE_MAX_EXT_ADV_INSTANCES MYNEWT_VAL(BLE_MULTI_ADV_INSTANCES)
|
||||
#define DEFAULT_BT_NIMBLE_WHITELIST_SIZE MYNEWT_VAL(BLE_LL_WHITELIST_SIZE)
|
||||
#define DEFAULT_BT_LE_HCI_EVT_HI_BUF_COUNT MYNEWT_VAL(BLE_TRANSPORT_EVT_COUNT)
|
||||
#define DEFAULT_BT_LE_HCI_EVT_LO_BUF_COUNT MYNEWT_VAL(BLE_TRANSPORT_EVT_DISCARDABLE_COUNT)
|
||||
#define DEFAULT_BT_LE_POWER_CONTROL_ENABLED MYNEWT_VAL(BLE_POWER_CONTROL)
|
||||
#if defined(CONFIG_BT_NIMBLE_50_FEATURE_SUPPORT)
|
||||
#define DEFAULT_BT_LE_50_FEATURE_SUPPORT (1)
|
||||
#else
|
||||
#define DEFAULT_BT_LE_50_FEATURE_SUPPORT (0)
|
||||
#endif
|
||||
#else
|
||||
|
||||
#if CONFIG_BT_LE_LL_CFG_FEAT_LE_CODED_PHY
|
||||
#define BLE_LL_SCAN_PHY_NUMBER_N (2)
|
||||
#else
|
||||
#define BLE_LL_SCAN_PHY_NUMBER_N (1)
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_BT_LE_MAX_PERIODIC_ADVERTISER_LIST)
|
||||
#define DEFAULT_BT_LE_MAX_PERIODIC_ADVERTISER_LIST (CONFIG_BT_LE_MAX_PERIODIC_ADVERTISER_LIST)
|
||||
#else
|
||||
#define DEFAULT_BT_LE_MAX_PERIODIC_ADVERTISER_LIST (5)
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_BT_LE_MAX_PERIODIC_SYNCS)
|
||||
#define DEFAULT_BT_LE_MAX_PERIODIC_SYNCS (CONFIG_BT_LE_MAX_PERIODIC_SYNCS)
|
||||
#else
|
||||
#define DEFAULT_BT_LE_MAX_PERIODIC_SYNCS (1)
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_BT_LE_MAX_CONNECTIONS)
|
||||
#define DEFAULT_BT_LE_MAX_CONNECTIONS (CONFIG_BT_LE_MAX_CONNECTIONS)
|
||||
#else
|
||||
#define DEFAULT_BT_LE_MAX_CONNECTIONS (2)
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_BT_LE_ACL_BUF_SIZE)
|
||||
#define DEFAULT_BT_LE_ACL_BUF_SIZE (CONFIG_BT_LE_ACL_BUF_SIZE)
|
||||
#else
|
||||
#define DEFAULT_BT_LE_ACL_BUF_SIZE (255)
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_BT_LE_ACL_BUF_COUNT)
|
||||
#define DEFAULT_BT_LE_ACL_BUF_COUNT (CONFIG_BT_LE_ACL_BUF_COUNT)
|
||||
#else
|
||||
#define DEFAULT_BT_LE_ACL_BUF_COUNT (24)
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_BT_LE_HCI_EVT_BUF_SIZE)
|
||||
#define DEFAULT_BT_LE_HCI_EVT_BUF_SIZE (CONFIG_BT_LE_HCI_EVT_BUF_SIZE)
|
||||
#else
|
||||
#define DEFAULT_BT_LE_HCI_EVT_BUF_SIZE (70)
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_BT_LE_EXT_ADV_MAX_SIZE)
|
||||
#define DEFAULT_BT_LE_EXT_ADV_MAX_SIZE (CONFIG_BT_LE_EXT_ADV_MAX_SIZE)
|
||||
#else
|
||||
#define DEFAULT_BT_LE_EXT_ADV_MAX_SIZE (31)
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_BT_LE_MAX_EXT_ADV_INSTANCES)
|
||||
#define DEFAULT_BT_LE_MAX_EXT_ADV_INSTANCES (CONFIG_BT_LE_MAX_EXT_ADV_INSTANCES)
|
||||
#else
|
||||
#define DEFAULT_BT_LE_MAX_EXT_ADV_INSTANCES (1)
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_BT_LE_WHITELIST_SIZE)
|
||||
#define DEFAULT_BT_NIMBLE_WHITELIST_SIZE (CONFIG_BT_LE_WHITELIST_SIZE)
|
||||
#else
|
||||
#define DEFAULT_BT_NIMBLE_WHITELIST_SIZE (12)
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_BT_LE_HCI_EVT_HI_BUF_COUNT)
|
||||
#define DEFAULT_BT_LE_HCI_EVT_HI_BUF_COUNT (CONFIG_BT_LE_HCI_EVT_HI_BUF_COUNT)
|
||||
#else
|
||||
#define DEFAULT_BT_LE_HCI_EVT_HI_BUF_COUNT (30)
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_BT_LE_HCI_EVT_LO_BUF_COUNT)
|
||||
#define DEFAULT_BT_LE_HCI_EVT_LO_BUF_COUNT (CONFIG_BT_LE_HCI_EVT_LO_BUF_COUNT)
|
||||
#else
|
||||
#define DEFAULT_BT_LE_HCI_EVT_LO_BUF_COUNT (8)
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_BT_LE_POWER_CONTROL_ENABLED)
|
||||
#define DEFAULT_BT_LE_POWER_CONTROL_ENABLED (CONFIG_BT_LE_POWER_CONTROL_ENABLED)
|
||||
#else
|
||||
#define DEFAULT_BT_LE_POWER_CONTROL_ENABLED (0)
|
||||
#endif
|
||||
#if defined(CONFIG_BT_LE_50_FEATURE_SUPPORT)
|
||||
#define DEFAULT_BT_LE_50_FEATURE_SUPPORT (1)
|
||||
#else
|
||||
#define DEFAULT_BT_LE_50_FEATURE_SUPPORT (0)
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#define DEFAULT_BT_LE_COEX_PHY_CODED_TX_RX_TLIM_EFF CONFIG_BT_LE_COEX_PHY_CODED_TX_RX_TLIM_EFF
|
||||
|
||||
#ifdef CONFIG_BT_LE_HCI_INTERFACE_USE_UART
|
||||
#define HCI_UART_EN CONFIG_BT_LE_HCI_INTERFACE_USE_UART
|
||||
#else
|
||||
#define HCI_UART_EN 0 // hci ram mode
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_BT_LE_SLEEP_ENABLE
|
||||
#define NIMBLE_SLEEP_ENABLE CONFIG_BT_LE_SLEEP_ENABLE
|
||||
#else
|
||||
#define NIMBLE_SLEEP_ENABLE 0
|
||||
#endif
|
||||
|
||||
|
||||
#ifdef CONFIG_BT_LE_TX_CCA_ENABLED
|
||||
#define DEFAULT_BT_LE_TX_CCA_ENABLED (CONFIG_BT_LE_TX_CCA_ENABLED)
|
||||
#else
|
||||
#define DEFAULT_BT_LE_TX_CCA_ENABLED (0)
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_BT_LE_CCA_RSSI_THRESH
|
||||
#define DEFAULT_BT_LE_CCA_RSSI_THRESH (CONFIG_BT_LE_CCA_RSSI_THRESH)
|
||||
#else
|
||||
#define DEFAULT_BT_LE_CCA_RSSI_THRESH (50)
|
||||
#endif
|
||||
|
||||
#define DEFAULT_BT_LE_SCAN_RSP_DATA_MAX_LEN_N DEFAULT_BT_LE_EXT_ADV_MAX_SIZE
|
||||
|
||||
|
||||
#if HCI_UART_EN
|
||||
#define DEFAULT_BT_LE_HCI_UART_TX_PIN (CONFIG_BT_LE_HCI_UART_TX_PIN)
|
||||
#define DEFAULT_BT_LE_HCI_UART_RX_PIN (CONFIG_BT_LE_HCI_UART_RX_PIN)
|
||||
#define DEFAULT_BT_LE_HCI_UART_PORT (CONFIG_BT_LE_HCI_UART_PORT)
|
||||
#define DEFAULT_BT_LE_HCI_UART_BAUD (CONFIG_BT_LE_HCI_UART_BAUD)
|
||||
#define DEFAULT_BT_LE_HCI_UART_DATA_BITS (UART_DATA_8_BITS)
|
||||
#define DEFAULT_BT_LE_HCI_UART_STOP_BITS (UART_STOP_BITS_1)
|
||||
#define DEFAULT_BT_LE_HCI_UART_PARITY (0)
|
||||
#define DEFAULT_BT_LE_HCI_UART_TASK_STACK_SIZE (CONFIG_BT_LE_HCI_UART_TASK_STACK_SIZE)
|
||||
#define DEFAULT_BT_LE_HCI_UART_FLOW_CTRL (0)
|
||||
#else
|
||||
#define DEFAULT_BT_LE_HCI_UART_TX_PIN (0)
|
||||
#define DEFAULT_BT_LE_HCI_UART_RX_PIN (0)
|
||||
#define DEFAULT_BT_LE_HCI_UART_PORT (0)
|
||||
#define DEFAULT_BT_LE_HCI_UART_BAUD (0)
|
||||
#define DEFAULT_BT_LE_HCI_UART_DATA_BITS (0)
|
||||
#define DEFAULT_BT_LE_HCI_UART_STOP_BITS (0)
|
||||
#define DEFAULT_BT_LE_HCI_UART_PARITY (0)
|
||||
#define DEFAULT_BT_LE_HCI_UART_TASK_STACK_SIZE (0)
|
||||
#define DEFAULT_BT_LE_HCI_UART_FLOW_CTRL (0)
|
||||
#endif
|
||||
|
||||
/* Unchanged configuration */
|
||||
|
||||
#define BLE_LL_CTRL_PROC_TIMEOUT_MS_N (40000) /* ms */
|
||||
|
||||
#define BLE_LL_CFG_NUM_HCI_CMD_PKTS_N (1)
|
||||
|
||||
#define BLE_LL_SCHED_ADV_MAX_USECS_N (852)
|
||||
|
||||
#define BLE_LL_SCHED_DIRECT_ADV_MAX_USECS_N (502)
|
||||
|
||||
#define BLE_LL_SCHED_MAX_ADV_PDU_USECS_N (376)
|
||||
|
||||
#define BLE_LL_SUB_VERS_NR_N (0x0000)
|
||||
|
||||
#define BLE_LL_JITTER_USECS_N (16)
|
||||
|
||||
#define BLE_PHY_MAX_PWR_DBM_N (10)
|
||||
|
||||
#define BLE_LL_CONN_DEF_AUTH_PYLD_TMO_N (3000)
|
||||
|
||||
#define RTC_FREQ_N (32768) /* in Hz */
|
||||
|
||||
#define BLE_LL_TX_PWR_DBM_N (9)
|
||||
|
||||
|
||||
#define RUN_BQB_TEST (0)
|
||||
#define RUN_QA_TEST (0)
|
||||
#define NIMBLE_DISABLE_SCAN_BACKOFF (0)
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __ESP_BT_CFG_H__ */
|
||||
Reference in New Issue
Block a user