alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2025-08-14 22:16:46 +00:00
Code Issues Packages Projects Releases Wiki Activity

feature: Add uart hal support.

Browse Source
This commit is contained in:
houwenxiang
2019-04-17 20:19:44 +08:00
committed by kooho
parent 1dd2443758
commit f27ae9b0e2
44 changed files with 3281 additions and 976 deletions
Download Patch File Download Diff File Expand all files Collapse all files

10
examples/protocols/pppos_client/components/modem/src/esp_modem.c
View File

@@ -369,8 +369,14 @@ modem_dte_t *esp_modem_dte_init(const esp_modem_dte_config_t *config)
.data_bits = config->data_bits,
.parity = config->parity,
.stop_bits = config->stop_bits,
.source_clk = UART_SCLK_APB,
.flow_ctrl = (config->flow_control == MODEM_FLOW_CONTROL_HW) ? UART_HW_FLOWCTRL_CTS_RTS : UART_HW_FLOWCTRL_DISABLE
};
/* Install UART driver and get event queue used inside driver */
res = uart_driver_install(esp_dte->uart_port, CONFIG_EXAMPLE_UART_RX_BUFFER_SIZE, CONFIG_EXAMPLE_UART_TX_BUFFER_SIZE,
CONFIG_EXAMPLE_UART_EVENT_QUEUE_SIZE, &(esp_dte->event_queue), 0);
MODEM_CHECK(res == ESP_OK, "install uart driver failed", err_uart_config);
MODEM_CHECK(uart_param_config(esp_dte->uart_port, &uart_config) == ESP_OK, "config uart parameter failed", err_uart_config);
if (config->flow_control == MODEM_FLOW_CONTROL_HW) {
res = uart_set_pin(esp_dte->uart_port, CONFIG_EXAMPLE_UART_MODEM_TX_PIN, CONFIG_EXAMPLE_UART_MODEM_RX_PIN,
@@ -387,10 +393,6 @@ modem_dte_t *esp_modem_dte_init(const esp_modem_dte_config_t *config)
res = uart_set_sw_flow_ctrl(esp_dte->uart_port, true, 8, UART_FIFO_LEN - 8);
}
MODEM_CHECK(res == ESP_OK, "config uart flow control failed", err_uart_config);
/* Install UART driver and get event queue used inside driver */
res = uart_driver_install(esp_dte->uart_port, CONFIG_EXAMPLE_UART_RX_BUFFER_SIZE, CONFIG_EXAMPLE_UART_TX_BUFFER_SIZE,
CONFIG_EXAMPLE_UART_EVENT_QUEUE_SIZE, &(esp_dte->event_queue), 0);
MODEM_CHECK(res == ESP_OK, "install uart driver failed", err_uart_config);
/* Set pattern interrupt, used to detect the end of a line. */
res = uart_enable_pattern_det_baud_intr(esp_dte->uart_port, '\n', 1, MIN_PATTERN_INTERVAL, MIN_POST_IDLE, MIN_PRE_IDLE);
/* Set pattern queue size */