mirror of
https://github.com/espressif/esp-idf.git
synced 2025-08-08 04:02:27 +00:00
support 727 esp32s3 BLE
This commit is contained in:
zwj
@@ -65,6 +65,8 @@ config BT_CTRL_HCI_TL
|
||||
default 0 if BT_CTRL_HCI_MODE_UART_H4
|
||||
default 1 if BT_CTRL_HCI_M0DE_VHCI
|
||||
default 1
|
||||
help
|
||||
HCI mode as VHCI or UART(H4)
|
||||
|
||||
config BT_CTRL_ADV_DUP_FILT_MAX
|
||||
int "The maxinum number of 5.0 extend duplicate scan filter"
|
||||
@@ -75,7 +77,7 @@ config BT_CTRL_ADV_DUP_FILT_MAX
|
||||
|
||||
config BT_CTRL_HW_CCA
|
||||
bool "HW CCA check enable"
|
||||
default y
|
||||
default n
|
||||
help
|
||||
It enables HW CCA feature in controller
|
||||
|
||||
@@ -83,13 +85,9 @@ config BT_CTRL_HW_CCA_EFF
|
||||
int
|
||||
default 1 if BT_CTRL_HW_CCA
|
||||
default 0
|
||||
|
||||
config BT_CTRL_COEX_PARAMETERS_ENABLE
|
||||
bool "Allow Bluetooth preemption in the use of RF to support coexistence with Wi-Fi"
|
||||
default n
|
||||
help
|
||||
Use pre-determined parameter set to control the use of RF by Bluetooth,s
|
||||
so that Bluetooth can compete for RF with Wi-fi to support coexistence.
|
||||
If other devices are sending packets in the air and the signal is strong,
|
||||
the packet hw to be sent this time is cancelled.
|
||||
|
||||
choice BT_CTRL_CE_LENGTH_TYPE
|
||||
prompt "Connection event length determination method"
|
||||
@@ -144,10 +142,20 @@ config BT_CTRL_RX_ANTENNA_INDEX_EFF
|
||||
|
||||
choice BT_CTRL_DFT_TX_POWER_LEVEL
|
||||
prompt "BLE default Tx power level"
|
||||
default BT_CTRL_DFT_TX_POWER_LEVEL_P9
|
||||
default BT_CTRL_DFT_TX_POWER_LEVEL_P3
|
||||
help
|
||||
Specify default Tx power level
|
||||
|
||||
config BT_CTRL_DFT_TX_POWER_LEVEL_N27
|
||||
bool "-27dBm"
|
||||
config BT_CTRL_DFT_TX_POWER_LEVEL_N24
|
||||
bool "-24dBm"
|
||||
config BT_CTRL_DFT_TX_POWER_LEVEL_N21
|
||||
bool "-21dBm"
|
||||
config BT_CTRL_DFT_TX_POWER_LEVEL_N18
|
||||
bool "-18dBm"
|
||||
config BT_CTRL_DFT_TX_POWER_LEVEL_N15
|
||||
bool "-15dBm"
|
||||
config BT_CTRL_DFT_TX_POWER_LEVEL_N12
|
||||
bool "-12dBm"
|
||||
config BT_CTRL_DFT_TX_POWER_LEVEL_N9
|
||||
@@ -164,25 +172,164 @@ choice BT_CTRL_DFT_TX_POWER_LEVEL
|
||||
bool "+6dBm"
|
||||
config BT_CTRL_DFT_TX_POWER_LEVEL_P9
|
||||
bool "+9dBm"
|
||||
config BT_CTRL_DFT_TX_POWER_LEVEL_P12
|
||||
bool "+12dBm"
|
||||
config BT_CTRL_DFT_TX_POWER_LEVEL_P15
|
||||
bool "+15dBm"
|
||||
config BT_CTRL_DFT_TX_POWER_LEVEL_P18
|
||||
bool "+18dBm"
|
||||
|
||||
endchoice
|
||||
|
||||
config BT_CTRL_DFT_TX_POWER_LEVEL_EFF
|
||||
int
|
||||
default 0 if BT_CTRL_DFT_TX_POWER_LEVEL_N12
|
||||
default 1 if BT_CTRL_DFT_TX_POWER_LEVEL_N9
|
||||
default 2 if BT_CTRL_DFT_TX_POWER_LEVEL_N6
|
||||
default 3 if BT_CTRL_DFT_TX_POWER_LEVEL_N3
|
||||
default 4 if BT_CTRL_DFT_TX_POWER_LEVEL_N0
|
||||
default 5 if BT_CTRL_DFT_TX_POWER_LEVEL_P3
|
||||
default 6 if BT_CTRL_DFT_TX_POWER_LEVEL_P6
|
||||
default 7 if BT_CTRL_DFT_TX_POWER_LEVEL_P9
|
||||
default 0 if BT_CTRL_DFT_TX_POWER_LEVEL_N27
|
||||
default 1 if BT_CTRL_DFT_TX_POWER_LEVEL_N24
|
||||
default 2 if BT_CTRL_DFT_TX_POWER_LEVEL_N21
|
||||
default 3 if BT_CTRL_DFT_TX_POWER_LEVEL_N18
|
||||
default 4 if BT_CTRL_DFT_TX_POWER_LEVEL_N15
|
||||
default 5 if BT_CTRL_DFT_TX_POWER_LEVEL_N12
|
||||
default 6 if BT_CTRL_DFT_TX_POWER_LEVEL_N9
|
||||
default 7 if BT_CTRL_DFT_TX_POWER_LEVEL_N6
|
||||
default 8 if BT_CTRL_DFT_TX_POWER_LEVEL_N3
|
||||
default 9 if BT_CTRL_DFT_TX_POWER_LEVEL_N0
|
||||
default 10 if BT_CTRL_DFT_TX_POWER_LEVEL_P3
|
||||
default 11 if BT_CTRL_DFT_TX_POWER_LEVEL_P6
|
||||
default 12 if BT_CTRL_DFT_TX_POWER_LEVEL_P9
|
||||
default 13 if BT_CTRL_DFT_TX_POWER_LEVEL_P12
|
||||
default 14 if BT_CTRL_DFT_TX_POWER_LEVEL_P15
|
||||
default 15 if BT_CTRL_DFT_TX_POWER_LEVEL_P18
|
||||
|
||||
default 0
|
||||
|
||||
config BT_CTRL_COEX_USE_HOOKS
|
||||
bool "Communicate Bluetooth working status with Wi-Fi to support coexistence"
|
||||
config BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_SUPP
|
||||
bool "BLE adv report flow control supported"
|
||||
default y
|
||||
help
|
||||
The function is mainly used to enable flow control for advertising reports. When it is enabled,
|
||||
advertising reports will be discarded by the controller if the number of unprocessed advertising
|
||||
reports exceeds the size of BLE adv report flow control.
|
||||
|
||||
config BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_NUM
|
||||
int "BLE adv report flow control number"
|
||||
depends on BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_SUPP
|
||||
range 50 1000
|
||||
default 100
|
||||
help
|
||||
The number of unprocessed advertising report that bluetooth host can save.If you set
|
||||
`BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_NUM` to a small value, this may cause adv packets lost.
|
||||
If you set `BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_NUM` to a large value, bluetooth host may cache a
|
||||
lot of adv packets and this may cause system memory run out. For example, if you set
|
||||
it to 50, the maximum memory consumed by host is 35 * 50 bytes. Please set
|
||||
`BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_NUM` according to your system free memory and handle adv
|
||||
packets as fast as possible, otherwise it will cause adv packets lost.
|
||||
|
||||
config BT_CTRL_BLE_ADV_REPORT_DISCARD_THRSHOLD
|
||||
int "BLE adv lost event threshold value"
|
||||
depends on BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_SUPP
|
||||
range 1 1000
|
||||
default 20
|
||||
help
|
||||
When adv report flow control is enabled, The ADV lost event will be generated when the number
|
||||
of ADV packets lost in the controller reaches this threshold. It is better to set a larger value.
|
||||
If you set `BT_CTRL_BLE_ADV_REPORT_DISCARD_THRSHOLD` to a small value or printf every adv lost event, it
|
||||
may cause adv packets lost more.
|
||||
|
||||
config BT_CTRL_BLE_SCAN_DUPL
|
||||
bool "BLE Scan Duplicate Options"
|
||||
default y
|
||||
help
|
||||
This select enables parameters setting of BLE scan duplicate.
|
||||
|
||||
choice BT_CTRL_SCAN_DUPL_TYPE
|
||||
prompt "Scan Duplicate Type"
|
||||
default BT_CTRL_SCAN_DUPL_TYPE_DEVICE
|
||||
depends on BT_CTRL_BLE_SCAN_DUPL
|
||||
help
|
||||
Scan duplicate have three ways. one is "Scan Duplicate By Device Address", This way is to use
|
||||
advertiser address filtering. The adv packet of the same address is only allowed to be reported once.
|
||||
Another way is "Scan Duplicate By Device Address And Advertising Data". This way is to use advertising
|
||||
data and device address filtering. All different adv packets with the same address are allowed to be
|
||||
reported. The last way is "Scan Duplicate By Advertising Data". This way is to use advertising data
|
||||
filtering. All same advertising data only allow to be reported once even though they are from
|
||||
different devices.
|
||||
|
||||
config BT_CTRL_SCAN_DUPL_TYPE_DEVICE
|
||||
bool "Scan Duplicate By Device Address"
|
||||
help
|
||||
This way is to use advertiser address filtering. The adv packet of the same address is only
|
||||
allowed to be reported once
|
||||
|
||||
config BT_CTRL_SCAN_DUPL_TYPE_DATA
|
||||
bool "Scan Duplicate By Advertising Data"
|
||||
help
|
||||
This way is to use advertising data filtering. All same advertising data only allow to be reported
|
||||
once even though they are from different devices.
|
||||
|
||||
config BT_CTRL_SCAN_DUPL_TYPE_DATA_DEVICE
|
||||
bool "Scan Duplicate By Device Address And Advertising Data"
|
||||
help
|
||||
This way is to use advertising data and device address filtering. All different adv packets with
|
||||
the same address are allowed to be reported.
|
||||
endchoice
|
||||
|
||||
config BT_CTRL_SCAN_DUPL_TYPE
|
||||
int
|
||||
depends on BT_CTRL_BLE_SCAN_DUPL
|
||||
default 0 if BT_CTRL_SCAN_DUPL_TYPE_DEVICE
|
||||
default 1 if BT_CTRL_SCAN_DUPL_TYPE_DATA
|
||||
default 2 if BT_CTRL_SCAN_DUPL_TYPE_DATA_DEVICE
|
||||
default 0
|
||||
|
||||
config BT_CTRL_SCAN_DUPL_CACHE_SIZE
|
||||
int "Maximum number of devices in scan duplicate filter"
|
||||
depends on BT_CTRL_BLE_SCAN_DUPL
|
||||
range 10 1000
|
||||
default 100
|
||||
help
|
||||
Maximum number of devices which can be recorded in scan duplicate filter.
|
||||
When the maximum amount of device in the filter is reached, the cache will be refreshed.
|
||||
|
||||
config BT_CTRL_BLE_MESH_SCAN_DUPL_EN
|
||||
bool "Special duplicate scan mechanism for BLE Mesh scan"
|
||||
depends on BT_CTRL_BLE_SCAN_DUPL
|
||||
default n
|
||||
help
|
||||
Send notifications of Bluetooth working status to support coexistence with Wi-Fi.
|
||||
This enables the BLE scan duplicate for special BLE Mesh scan.
|
||||
|
||||
config BT_CTRL_MESH_DUPL_SCAN_CACHE_SIZE
|
||||
int "Maximum number of Mesh adv packets in scan duplicate filter"
|
||||
depends on BT_CTRL_BLE_MESH_SCAN_DUPL_EN
|
||||
range 10 1000
|
||||
default 100
|
||||
help
|
||||
Maximum number of adv packets which can be recorded in duplicate scan cache for BLE Mesh.
|
||||
When the maximum amount of device in the filter is reached, the cache will be refreshed.
|
||||
|
||||
choice BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM
|
||||
prompt "Coexistence: limit on MAX Tx/Rx time for coded-PHY connection"
|
||||
default BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_DIS
|
||||
depends on ESP32_WIFI_SW_COEXIST_ENABLE
|
||||
help
|
||||
When using PHY-Coded in BLE connection, limitation on max tx/rx time can be applied to
|
||||
better avoid dramatic performance deterioration of Wi-Fi.
|
||||
|
||||
config BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_EN
|
||||
bool "Force Enable"
|
||||
help
|
||||
Always enable the limitation on max tx/rx time for Coded-PHY connection
|
||||
|
||||
config BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_DIS
|
||||
bool "Force Disable"
|
||||
help
|
||||
Disable the limitation on max tx/rx time for Coded-PHY connection
|
||||
endchoice
|
||||
|
||||
config BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_EFF
|
||||
int
|
||||
default 0 if (!ESP32_WIFI_SW_COEXIST_ENABLE)
|
||||
default 1 if BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_EN
|
||||
default 0 if BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_DIS
|
||||
|
||||
menu "MODEM SLEEP Options"
|
||||
visible if BT_ENABLED
|
||||
@@ -217,8 +364,22 @@ menu "MODEM SLEEP Options"
|
||||
selected, bluetooth modem sleep can work under Dynamic Frequency Scaling(DFS) enabled, but
|
||||
cannot work when light sleep is enabled. Main crystal has a relatively better performance than
|
||||
other bluetooth low power clock sources.
|
||||
endchoice
|
||||
config BT_CTRL_LPCLK_SEL_EXT_32K_XTAL
|
||||
bool "External 32kHz crystal"
|
||||
depends on ESP32S3_RTC_CLK_SRC_EXT_CRYS
|
||||
help
|
||||
External 32kHz crystal has a nominal frequency of 32.768kHz and provides good frequency
|
||||
stability. If used as Bluetooth low power clock, External 32kHz can support Bluetooth
|
||||
modem sleep to be used with both DFS and light sleep.
|
||||
|
||||
config BT_CTRL_LPCLK_SEL_RTC_SLOW
|
||||
bool "Internal 90kHz RC oscillator"
|
||||
depends on ESP32S3_RTC_CLK_SRC_INT_RC
|
||||
help
|
||||
Internal 90kHz RC oscillator.
|
||||
|
||||
|
||||
endchoice
|
||||
endmenu
|
||||
|
||||
config BT_CTRL_SLEEP_MODE_EFF
|
||||
@@ -229,6 +390,8 @@ config BT_CTRL_SLEEP_MODE_EFF
|
||||
config BT_CTRL_SLEEP_CLOCK_EFF
|
||||
int
|
||||
default 1 if BT_CTRL_LPCLK_SEL_MAIN_XTAL
|
||||
default 2 if BT_CTRL_LPCLK_SEL_EXT_32K_XTAL
|
||||
default 3 if BT_CTRL_LPCLK_SEL_RTC_SLOW
|
||||
|
||||
default 0
|
||||
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
Reference in New Issue
Block a user