alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2025-08-10 04:43:33 +00:00
Code Issues Packages Projects Releases Wiki Activity

docs: remove front page C3 docs not updated warning

Browse Source
This commit is contained in:
Marius Vikhammer
2021-05-06 08:39:11 +08:00
parent 3f0851a22c
commit fd477fa60e
7 changed files with 37 additions and 19 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
docs/en/api-reference/peripherals/i2s.rst
View File

@@ -1,6 +1,12 @@
I2S
===
.. only:: esp32c3
.. warning::
This document is not updated for ESP32-C3 yet.
Overview
--------

6
docs/en/api-reference/peripherals/sd_pullup_requirements.rst
View File

@@ -1,6 +1,12 @@
SD Pull-up Requirements
=======================
.. only:: esp32c3
.. warning::
This document is not updated for ESP32-C3 yet.
Espressif hardware products are designed for multiple use cases which may require different pull states on pins. For this reason, the pull state of particular pins on certain products will need to be adjusted to provide the pull-ups required in the SD bus.
SD pull-up requirements apply to cases where {IDF_TARGET_NAME} uses the SPI controller to communicate with SD cards. When an SD card is operating in SPI mode or 1-bit SD mode, the CMD and DATA (DAT0 - DAT3) lines of the SD bus must be pulled up by 10 kOhm resistors. Slaves should also have pull-ups on all above-mentioned lines (regardless of whether these lines are connected to the host) in order to prevent SD cards from entering a wrong state.

8
docs/en/api-reference/peripherals/sdio_slave.rst
View File

@@ -1,6 +1,12 @@
SDIO Card Slave Driver
======================
.. only:: esp32c3
.. warning::
This document is not updated for ESP32-C3 yet.
Overview
--------
@@ -94,7 +100,7 @@ The SDIO slave driver uses the following terms:
- Sending: slave to host transfers.
- Receiving: host to slave transfers.
.. note:: Register names in *{IDF_TARGET_NAME} Technical Reference Manual* > *SDIO Slave Controller*
.. note:: Register names in *{IDF_TARGET_NAME} Technical Reference Manual* > *SDIO Slave Controller*
[`PDF <{IDF_TARGET_TRM_EN_URL}#sdioslave>`__] are oriented from the point of view of the host, i.e. 'rx'
registers refer to sending, while 'tx' registers refer to receiving. We're not using `tx` or `rx` in the driver to
avoid ambiguities.

6
docs/en/api-reference/peripherals/sdmmc_host.rst
View File

@@ -1,6 +1,12 @@
SDMMC Host Driver
=================
.. only:: esp32c3
.. warning::
This document is not updated for ESP32-C3 yet.
Overview
--------