bootloader: fix the WRSR format for ISSI flash chips

1. The 2nd bootloader always call `rom_spiflash_unlock()`, but never help to clear the WEL bit when exit. This may cause system unstability.

   This commit helps to clear WEL when flash configuration is done.

   **RISK:** When the app starts, it didn't have to clear the WEL before it actually write/erase. But now the very first write/erase operation should be done after a WEL clear. Though the risk is little (all the following write/erase also need to clear the WEL), we still have to test this carefully, especially for those functions used by the OTA.

2. The `rom_spiflash_unlock()` function in the patch of ESP32 may (1) trigger the QPI, (2) clear the QE or (3) fail to unlock the ISSI chips.

   Status register bitmap of ISSI chip and GD chip:

| SR | ISSI | GD25LQ32C |
| -- | ---- | --------- |
| 0  | WIP  | WIP       |
| 1  | WEL  | WEL       |
| 2  | BP0  | BP0       |
| 3  | BP1  | BP1       |
| 4  | BP2  | BP2       |
| 5  | BP3  | BP3       |
| 6  | QE   | BP4       |
| 7  | SRWD | SRP0      |
| 8  |      | SRP1      |
| 9  |      | QE        |
| 10 |      | SUS2      |
| 11 |      | LB1       |
| 12 |      | LB2       |
| 13 |      | LB3       |
| 14 |      | CMP       |
| 15 |      | SUS1      |

   QE bit of other chips are at the bit 9 of the status register (i.e. bit 1 of SR2), which should be read by RDSR2 command.

   However, the RDSR2 (35H, Read Status 2) command for chip of other vendors happens to be the QIOEN (Enter QPI mode) command of ISSI chips. When the `rom_spiflash_unlock()` function trys to read SR2, it may trigger the QPI of ISSI chips.

   Moreover, when `rom_spiflash_unlock()` try to clear the BP4 bit in the status register, QE (bit 6) of ISSI chip may be cleared by accident. Or if the ISSI chip doesn't accept WRSR command with argument of two bytes (since it only have status register of one byte), it may fail to clear the other protect bits (BP0~BP3) as expected.

   This commit makes the `rom_spiflash_unlock()` check whether the vendor is issi. if so, `rom_spiflash_unlock()` only send RDSR to read the status register, send WRSR with only 1 byte argument, and also avoid clearing the QE bit (bit 6).

3. `rom_spiflash_unlock()` always send WRSR command to clear protection bits even when there is no protection bit active. And the execution of clearing status registers, which takes about 700us, will also happen even when there's no bits cleared.

   This commit skips the clearing of status register if there is no protection bits active.

Also move the execute_flash_command to be a bootloader API; move
implementation of spi_flash_wrap_set to the bootloader

components/bootloader_support/include_bootloader/bootloader_flash.h

@@ -19,11 +19,26 @@
 #include <stdint.h>
 #include <esp_err.h>
 #include <esp_spi_flash.h> /* including in bootloader for error values */
+#include "sdkconfig.h"
 
 #define FLASH_SECTOR_SIZE 0x1000
 #define FLASH_BLOCK_SIZE 0x10000
 #define MMAP_ALIGNED_MASK 0x0000FFFF
 
+/* SPI commands (actual on-wire commands not SPI controller bitmasks)
+   Suitable for use with the bootloader_execute_flash_command static function.
+*/
+#define CMD_RDID       0x9F
+#define CMD_WRSR       0x01
+#define CMD_WRSR2      0x31 /* Not all SPI flash uses this command */
+#define CMD_WREN       0x06
+#define CMD_WRDI       0x04
+#define CMD_RDSR       0x05
+#define CMD_RDSR2      0x35 /* Not all SPI flash uses this command */
+#define CMD_OTPEN      0x3A /* Enable OTP mode, not all SPI flash uses this command */
+#define CMD_WRAP       0x77 /* Set burst with wrap command */
+
+
 /* Provide a Flash API for bootloader_support code,
    that can be used from bootloader or app code.
 
@@ -136,4 +151,30 @@ static inline uint32_t bootloader_cache_pages_to_map(uint32_t size, uint32_t vad
     return (size + (vaddr - (vaddr & MMU_FLASH_MASK)) + MMU_BLOCK_SIZE - 1) / MMU_BLOCK_SIZE;
 }
 
+/**
+ * @brief Execute a user command on the flash
+ *
+ * @param command The command value to execute.
+ * @param mosi_data MOSI data to send
+ * @param mosi_len Length of MOSI data, in bits
+ * @param miso_len Length of MISO data to receive, in bits
+ * @return Received MISO data
+ */
+uint32_t bootloader_execute_flash_command(uint8_t command, uint32_t mosi_data, uint8_t mosi_len, uint8_t miso_len);
+
+/**
+ * @brief Enable the flash write protect (WEL bit).
+ */
+void bootloader_enable_wp(void);
+
+#if CONFIG_IDF_TARGET_ESP32S2
+/**
+ * @brief Set the burst mode setting command for specified wrap mode.
+ *
+ * @param mode The specified warp mode.
+ * @return always ESP_OK
+ */
+esp_err_t bootloader_flash_wrap_set(spi_flash_wrap_mode_t mode);
+#endif
+
 #endif