gaoxu
33560f506e
ci(adc): enable esp32c61 adc test
2025-07-18 09:29:23 +08:00
igor.udot
daf2d31008
test: format all test scripts
2025-03-05 12:08:48 +08:00
Frantisek Hrbata
1c92945f59
change(examples): switch examples to use a minimal build
...
Currently, several example dependencies rely on the fact that all
registered components are added to the build, along with components
specified in common requirements. This results in longer build times
because even unused components must be built. Switch all examples to use
idf_minimal_build to compile only the components actually required by
the example.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com >
2024-11-20 20:14:40 +01:00
Frantisek Hrbata
ad15109daa
change(examples): explicitly specify component dependencies for examples
...
Currently, several examples do not explicitly state their component
dependencies, relying instead on the default behavior that includes all
registered components and commonly required ones in the build.
Explicitly adding component dependencies can reduce build time when
set(COMPONENTS main) is used.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com >
2024-11-20 14:11:24 +01:00
gaoxu
efd04b7709
feat(adc): support ADC oneshot and continuous on C61
2024-11-08 17:13:26 +08:00
gaoxu
65820c07ac
feat(adc): support ADC oneshot and continuous mode on ESP32C5 and enable test
2024-07-13 14:03:23 +08:00
gaoxu
795f3fe377
feat(adc): support ADC continuous mode on ESP32P4
2024-06-03 16:50:39 +08:00
morris
b12e250b2c
refactor(examples): reformat peripheral examples with astyle_py
2023-09-28 10:08:04 +08:00
Alexey Lantushenko
9d1747dd59
1. The example does not work with when board only supports TYPE1 format 2. The example has syntax error converting void* to adc_digi_output_data_t*
...
Signed-off-by: Armando <douyiwen@espressif.com >
Merges https://github.com/espressif/esp-idf/pull/11347
2023-05-09 12:37:05 +08:00
Armando
6bf35715e4
fix adc_continuous example pytest potential failure
2023-04-25 12:28:27 +08:00
Armando
d0e4d36fb6
esp_adc: support h2 oneshot mode and continuous mode
2023-02-23 11:48:31 +08:00
laokaiyao
5333ac81bf
adc: support ADC on esp32c6 (driver/test/example)
2022-12-23 11:24:06 +08:00
Chen Yudong
9282446d9b
CI: add example adc tests
2022-12-21 21:19:29 +08:00
Armando
b4c90c44d2
adc: no longer support adc2 continuous mode on esp32c3 and esp32s3
...
Due to HW limitation, we don't support this anymore. On s3 and c3, ADC2 under continuous mode is not stable.
However, you can enable CONFIG_ADC_CONTINUOUS_FORCE_USE_ADC2_ON_C3_S3 to force use
ADC2.
Refer to errata to know more details:
https://www.espressif.com/sites/default/files/documentation/esp32-s3_errata_en.pdf
https://www.espressif.com/sites/default/files/documentation/esp32-c3_errata_en.pdf
2022-12-16 02:06:03 +00:00
laokaiyao
8677216576
esp32h2: renaming esp32h2 to esp32h4
2022-11-08 17:05:33 +08:00
morris
d91c8759c0
driver: remove -Wno-format flag
2022-08-08 08:30:09 +00:00
Ivan Grokhotkov
e596c84d49
build system: re-add -Wno-format as private flag for some example components
2022-08-03 16:42:47 +04:00
Armando
5b523a3313
esp_adc: new esp_adc component and adc drivers
2022-07-15 18:31:00 +08:00
