alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2025-08-15 14:36:45 +00:00
Code Issues Packages Projects Releases Wiki Activity
36,483 Commits 21 Branches 167 Tags
2887be193be6c4d0abdd31f52e69e857a8045d13
Commit Graph

79 Commits

Author SHA1 Message Date
David Cermak
a662c54630 fix(common_connect): Fix example's stdin/out to setup UART interrupt once 
Function example_configure_stdin_stdout() was used for simple UART I/O
operation in CI to enter test env configuration (wifi ssid, IPs, etc).
It could be called multiple times, but didn't handle the situation where
we install UART interrupt from multiple source (e.g. in ICMP tests,
where we first need to enter wifi credentials of test AP and then we
start ping-cmd console to handle ping commands)
 2025-01-13 10:25:45 +01:00
WanqQixiang
6725f0c8d9 fix(openthread): Fix CI failure of ot_trel example build 2024-12-31 14:50:28 +08:00
WanqQixiang
11d4907521 feat(protocol_examples_common): Add Thread connect to support Thread for the protocol examples 2024-12-31 14:49:22 +08:00
Xu Si Yu
35e36f2cab fix(common_components): unregister event handler if wifi disconnect and stop reconnecting 2024-07-25 15:59:58 +08:00
zwx
fc2ae79ae0 feat(eth) configure eth mac using esp_read_mac 
* Closes https://github.com/espressif/esp-idf/issues/13808
 2024-05-27 15:43:35 +08:00
David Cermak
88d18e9a40 fix(esp_netif): Mark esp_netif_next deprecated and fix usages 
* Uses netif_find_if() in IPv6 examples
* Fixes esp_netif_next() usage in L2TAP
 2023-10-13 15:56:45 +02:00
Euripedes Rocha
4778d9b477 protocols/examples: Disable Wifi connection if not supported 
- Disable Kconfig option for Wifi if not supported by the SoC
- Enable building mqtt examples when target is set to esp32h2
 2023-05-30 13:26:45 +02:00
xieqinan
745780cdc4 comm_components: eth_start initializes spi bus with SPI_DMA_CH_AUTO 
Close https://github.com/espressif/esp-idf/issues/11083
 2023-04-17 12:02:05 +00:00
David Čermák
956e62c461 Merge branch 'feature/lwip_ipv6_only' into 'master' 
lwip: Support IPv6 only mode

Closes IDF-6023

See merge request espressif/esp-idf!20468
 2023-03-01 21:38:10 +08:00
Harshit Malpani
34705c0cc4 fix esp_http_client_example to build for Linux target. Made protocol_examples_common compatible for Linux target 2023-02-27 15:12:14 +05:30
David Cermak
5f6cb31105 lwip: Support IPv6 only mode 2023-02-27 08:53:34 +01:00
David Cermak
854e16feb3 examples: Add common linux component tapif_io 
That can be used with linux target on lwip to pass packets from lwip to
linux host networking stack, e.g. routing the trafic to internet.
 2023-01-31 08:43:50 +01:00
Laukik Hase
167618d6a4 examples/protocols: Added URI encoding/decoding feature 
- http_server/simple: Decoding received query
  - esp_http_client: Sending encoded query
 2023-01-25 17:47:14 +05:30
Chen Yudong
9c28e3f1cb example_common: fix netif ips may be printed before got ipv4 2022-09-05 16:53:55 +08:00
David Cermak
5c383d7b73 esp_netif/lwip: Fix deps cycles to "lwip -> esp_netif -> phy-drivers" 
Fix dependency tree so that lwip doesn't depend on any specific network
interface component.
Network interface drivers shall depend on esp_netif.
esp_netif shall depend on lwip (but not on any specific interface
driver) -- it optionally depends on vfs and esp_eth (need ethernet
header for L2/bridge mode)
 2022-07-20 14:59:07 +02:00
Chen Yudong
2f75733ad7 CI: Improve common test methods 
also fix ota test cases
 2022-07-15 14:21:34 +08:00
Chen Yudong
4d9393fc53 example: use example common componments in esp_local_ctrl 2022-07-15 01:16:35 +08:00
Chen Yudong
bf0e4943be common_components: add wifi connect console commands 2022-07-15 01:16:27 +08:00
Ondrej Kosta
bb6c6aff36 esp_eth: SPI Ethernet modules initialization simplification 2022-07-14 08:46:22 +02:00
Harshit Malpani
3f00a3e120 Add config option to set stack size for emac_rx task 2022-06-16 09:03:49 +00:00
David Cermak
5e19b9c951 esp-netif: Make dependency on esp-eth optional 
* esp-netif to optionally depend on esp-eth (only for l2tap config)
* esp_eth.h now includes the original ethernet header and the
ethernet-netif glue layer
* Updated examples and test to explicitely use esp-eth dependency if
needed
 2022-06-09 07:55:40 +00:00
Ondrej Kosta
1a20b10fd3 Examples: common source for GPIO range in Kconfigs defined 2022-05-12 09:33:40 +02:00
Ondrej Kosta
fcdb0306d0 examples: added ESP-NETIF L2 TAP example 2022-04-12 12:33:57 +00:00
Omar Chebib
2571aaf3c9 G0: target component (components/esp32*) doesn't depend on driver anymore 2022-03-02 04:21:00 +00:00
David Cermak
8da2e4088c esp_eth: Update esp32's EMAC API to decouple driver and vendor config 2022-02-14 16:17:29 +00:00
David Cermak
2553fb5845 esp_eth: Make EMAC DMA burst size configurable 
Merges https://github.com/espressif/esp-idf/pull/7874
Closes  https://github.com/espressif/esp-idf/issues/7380
 2022-02-14 16:17:29 +00:00
Darian Leung
57fd78f5ba freertos: Remove legacy data types 
This commit removes the usage of all legacy FreeRTOS data types that
are exposed via configENABLE_BACKWARD_COMPATIBILITY. Legacy types can
still be used by enabling CONFIG_FREERTOS_ENABLE_BACKWARD_COMPATIBILITY.
 2022-02-09 23:05:45 +08:00
Fischerauer Christian
3fb83f2866 esp_eth: rework KSZ80xx implementation and add more KSZ80xx PHYs 
* add support for KSZ8001, KSZ8021, KSZ8031, KSZ8051 and KSZ8061
* remove duplicate code
* simplify architecture to make the code base extensible (for future work)
 2021-12-02 11:56:08 +01:00
Roland Dobai
766aa57084 Build & config: Remove leftover files from the unsupported "make" build system 2021-11-11 15:32:36 +01:00
Ondrej Kosta
35454b2bf7 Eth_examples: added support of ESP32-S3 chip 
Defined SPI modules default GPIO values for ESP32-S3

SPI bus needs to be initialized with SPI_DMA_CH_AUTO option
 2021-09-08 13:11:39 +02:00
Ondrej Kosta
300618e5be Merge branch 'feature/dual_eth' into 'master' 
esp_eth: add support for multiple Ethernets modules at a time

Closes IDFGH-5596

See merge request espressif/esp-idf!14640
 2021-08-27 06:11:48 +00:00
Ondrej Kosta
ef30384902 esp_eth: add support for multiple Ethernets modules at a time 
Ethernet driver events properly bounded with ESP NETIF actions to support multiple Ethernet modules used at a time.

Components using Ethernet updated to conform with new API.

Closes https://github.com/espressif/esp-idf/issues/7318
 2021-08-24 17:10:36 +02:00
Ivan Grokhotkov
ece73a3e55 examples/protocols: fix compilation when CONFIG_EXAMPLE_USE_OPENETH=y 
The code checked CONFIG_ETH_USE_SPI_ETHERNET (which is usually set),
but CONFIG_EXAMPLE_ETH_SPI_xxx_GPIO options are only defined if
CONFIG_EXAMPLE_USE_SPI_ETHERNET is set. Fix the ifdef accordingly.
Regression from aea901f0.
 2021-08-15 21:58:42 +05:00
Ondrej Kosta
4e77430107 examples: Update Ethernet examples to use new PHY LAN87xx init function 
Ethernet examples device usage and Kconfig options synchronized
 2021-07-28 19:34:05 +08:00
He Yin Ling
97a09e51ce example: set example wifi scan method to all channel: 
in CI example test we could have runners with same SSID in the same lab.
Use scan on all channel will let DUT connect to the AP with best RSSI.
 2021-06-09 10:01:17 +08:00
ronghulin
3373eff989 Bugfix: Connect example to add scan mode config 
Closes https://github.com/espressif/esp-idf/issues/6595
 2021-03-24 15:44:48 +08:00
yuanjm
821eea45b3 examples: Strip IPv6 function in example and use sockaddr_storage to replace sockaddr_in6 2021-02-23 18:26:03 +08:00
xiehang
b8a8fe3f54 esp_wifi: Modify ESP_IF_WIFI_STA to WIFI_IF_STA 2021-01-19 11:55:44 +08:00
xiehang
c260c223e9 example: We should not check the return value of esp_wifi_connect() in any case 2021-01-11 14:40:18 +08:00
morris
8d0a0537cc eth: hide spi configuration when using internal emac 2020-11-27 21:11:31 +08:00
morris
aea901f014 eth: support W5500 in network examples 2020-11-16 13:30:49 +08:00
Angus Gratton
66fb5a29bb Whitespace: Automated whitespace fixes (large commit) 
Apply the pre-commit hook whitespace fixes to all files in the repo.

(Line endings, blank lines at end of file, trailing whitespace)
 2020-11-11 07:36:35 +00:00
nx518
9207c6ca8e lwip: Added description to Kconfig option on IPv6 SLAAC 
Closes https://github.com/espressif/esp-idf/issues/6076
Merges https://github.com/espressif/esp-idf/pull/6078
 2020-11-09 22:10:32 +00:00
David Cermak
52a7721bf7 examples: Common connect component: Unregister shutdown handler on disconnection 
To be able to connect smoothly after disconnecting, we have to unregister all handlers including shutdown handler on disconnection
 2020-09-02 11:12:08 +02:00
David Cermak
085d2b8d25 examples: common connect to also support no connection flow if no inteface chosen 
This is useful for testing if there's no need for external network and connection
 2020-07-14 10:42:17 +00:00
houwenxiang
8e00522cd7 vfs: support vfs uart set line endings with specified uart number 2020-07-10 11:15:09 +08:00
David Cermak
5c6bca69a5 examples: common connect: fix build error if ipv6 disabled 
Declaration of local variable esp_ip6_addr_t ip6[]; was active even if IPV6 disabled in sdkconfig. Introduced in 06711c7c36
 2020-05-22 08:45:59 +00:00
Mahavir Jain
5f5bf9e5ee Merge branch 'bugfix/allow_buffering_on_stdout' into 'master' 
protocol_examples_common: keep buffering enabled on stdout

See merge request espressif/esp-idf!8793
 2020-05-20 10:51:29 +08:00
Mahavir Jain
7925ba245d protocol_examples_common: keep buffering enabled on stdout 
- Newlib uses significantly more stack space when printing to an unbuffered stream
- For examples tests, disabling buffering on stdout is not really required

This issue was found during one of the OTA example test failure, root cause
being stack overflow in `esp_event` task.
 2020-05-18 16:59:20 +05:30
David Cermak
06711c7c36 examples: common connect component to use both interfaces at once 2020-05-18 09:26:24 +02:00