Introduce a new HAL API `usb_dwc_hal_set_fifo_config()` that allows advanced users
to manually configure RX, Non-Periodic TX, and Periodic TX FIFO sizes. This offers
fine-grained control beyond the previous bias-based sizing approach.
The HAL function no longer returns `esp_err_t`, and internal validations are enforced
via `HAL_ASSERT()`. Responsibility for input validation has been moved to the HCD layer.
FIFO configuration must be applied before any USB pipes are created or activated.
This feature is intended for use during `usb_host_install()`.
If no custom FIFO configuration is provided (i.e., all values are zero),
the driver falls back to a bias-based default layout based on Kconfig settings
(`CONFIG_USB_HOST_HW_BUFFER_BIAS_*`). Bias resolution is done inside `hcd_port_init()`.
The `port_obj_t` structure has been extended with a `fifo_config` field, which stores
the configuration to allow re-application after a USB port reset.
Obsolete FIFO bias enums (`usb_hal_fifo_bias_t`, `hcd_port_fifo_bias_t`) and related
APIs (`hcd_port_set_fifo_bias()`) have been removed in favor of the new structure-based mechanism.
The HCD initialization and port reset flow has been updated to use the explicit
FIFO configuration.
USB Host maintainer documentation (`maintainers.md`) has been updated accordingly.
Test cases were updated to remove the usage of removed bias API and now rely on default
or custom FIFO configuration.
Although the hardware documentation suggests that SCHED_INFO is only used
for periodic channels, empirical evidence shows that omitting this configuration
on non-periodic channels can cause them to freeze.
Therefore, we set this field for all channels to ensure reliable operation.
In Scatter-Gather DMA mode, the USB-DWC will automatically enable
PING protocol if an OUT packet is NACKed by the High-Speed device.
The PING bit must be manually reset.
Previously, we included symbols from soc/usb_dwc_cfg.h and configured
the HAL and LL according to it. Now we get the configuration in runtime
from USB-DWC registers.
Added missing definition for USB FS peripheral on ESP32-P4.
This commit updates the "*_struct.h" files for the USB OTG peripheral:
- Added/removed some missing/non-existing register fields
- Added "reserved" place holders for registers that are missing due to IP
configuration.
- Added "usb_dwc_cfg.h" listing the USB OTG IP configuration for each target.
- Updated LL/HAL according to register field updates. Also tidied up the include
directives in those headers.
This commit adds a subset of the DWC OTG configuration values to the
'usb_dwc_ll.h' file. Only relevant configuration values have been added.
Some DWC OTG releated constants have also been moved from 'usb_dwc_hal.h'
to 'usb_dwc_ll.h' and renamed.
This commit fixes a race condtion bug with usb_dwc_hal_chan_request_halt()
where a channel the channel is halted if it has just completed a transfer
(i.e., finished processing a QTD with the "HOC" flag set) but the channel is
still pending interrupt handling. In this case...
- usb_dwc_hal_chan_request_halt() would simply read the channel's underlying
register, determine it is not active, not set the "halt_requested" flag, and
simply return true.
- The caller assumes of usb_dwc_hal_chan_request_halt() will assume that the
channel has halted, and may proceed to reconfigure the pipe/port
- When usb_dwc_hal_chan_decode_intr() comes to process the pending interrupt
it will simply return USB_DWC_HAL_CHAN_EVENT_CPLT not knowing a halt has been
requested.
This commit updates the implementation of usb_dwc_hal_chan_request_halt() so
that a halt is properly requested even if the underlying channel has already
physically halted.
Following the file renaming to use the "usb_dwc" prefix, this commit
updates the symbol names of those files to use the "usb_dwc" as well.
Some LL functions were also renamed so that the register name is
mentioned.
This commit updates the DWC_OTG based struct/ll/hal file names to
use the prefix "usb_dwc". This naming scheme reduces ambiguity if
another USB controller implementation is added.
As a result, "hcd.c" has been renamed to "hcd_dwc.c"
