menu "USB PHY Test"
    depends on IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32S3

    orsource "$IDF_PATH/examples/common_components/env_caps/$IDF_TARGET/Kconfig.env_caps"

    config USB_PHY_TEST_OTG_DRVVBUS_ENABLE
        bool "Enable driving VBUS by an internal DRVVBUS signal"
        default n
        help
            USB-OTG peripheral features a DRVVBUS signal, which controls the VBUS voltage. The DRVVBUS signal can be
            either internally connected to a PHY (if a PHY supports it), in such a case the PHY would be controlling
            the VBUS voltage by itself. Or the DRVVBUS can be handled by an external logic (a transistor switch).
            Our PHY does not support the DRVVBUS signal, thus we must use an external logic to control the VBUS
            voltage. The DRVVBUS signal is controlled via HCD_PORT_CMD_POWER_OFF and HCD_PORT_CMD_POWER_ON

    config USB_PHY_TEST_OTG_DRVVBUS_GPIO
        depends on USB_PHY_TEST_OTG_DRVVBUS_ENABLE
        int "Connect a GPIO to the internal DRVVBUS signal"
        range ENV_GPIO_RANGE_MIN ENV_GPIO_OUT_RANGE_MAX
        default 1
        help
            GPIO number, that will be internally connected to the DRVVBUS signal.
            USB Host CI target runners feature an external power switch controlled by this GPIO, to control the VBUS
            voltage of USB devices during test.

endmenu