CONFIG_IDF_TARGET="esp32p4"

CONFIG_UNITY_ENABLE_FIXTURE=y
CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER=y
CONFIG_ETH_USE_ESP32_EMAC=y
CONFIG_ESP_TASK_WDT_EN=n

CONFIG_TARGET_USE_INTERNAL_ETHERNET=y
CONFIG_TARGET_ETH_PHY_DEVICE_IP101=y

CONFIG_TARGET_USE_DEFAULT_EMAC_CONFIG=y

CONFIG_TARGET_RMII_CLK_OUT=y
# Test board needs to be modified!
# Connect GPIO23 to GPIO32 via wire.
CONFIG_TARGET_RMII_CLK_OUT_GPIO=23
CONFIG_TARGET_RMII_CLK_IN_GPIO=32