michael 404e99965d spi_master: change high part config to allow transactions of 64 bytes

2018-08-16 18:55:09 +08:00

..

adc.rst

The 'Two Point Values' used to calibrate ADC readings, unlike 'eFuse Vref', are not measured and burned into eFuse BLOCK3 for each individual chip during factory calibration. This operation should be done by user, if more accurate calibration is required.

2018-06-29 19:01:11 +02:00

can.rst

CAN Driver

2018-07-04 14:01:57 +08:00

dac.rst

Moved files into separate folders per 'en' and 'zh_CN' language version and linked 'zh_CN' files back to 'en' files if translation is not yet available

2018-03-13 21:57:08 +01:00

esp_slave_protocol.rst

doc(sdio_slave): add some information of slave protocol

2018-06-25 06:55:19 +00:00

gpio.rst

Moved files into separate folders per 'en' and 'zh_CN' language version and linked 'zh_CN' files back to 'en' files if translation is not yet available

2018-03-13 21:57:08 +01:00

i2c.rst

Moved files into separate folders per 'en' and 'zh_CN' language version and linked 'zh_CN' files back to 'en' files if translation is not yet available

2018-03-13 21:57:08 +01:00

i2s.rst

Moved files into separate folders per 'en' and 'zh_CN' language version and linked 'zh_CN' files back to 'en' files if translation is not yet available

2018-03-13 21:57:08 +01:00

index.rst

CAN Driver

2018-07-04 14:01:57 +08:00

ledc.rst

Restored back original 'zh_CN' version files and updated links between versions

2018-03-13 21:57:08 +01:00

mcpwm.rst

Moved files into separate folders per 'en' and 'zh_CN' language version and linked 'zh_CN' files back to 'en' files if translation is not yet available

2018-03-13 21:57:08 +01:00

pcnt.rst

Moved files into separate folders per 'en' and 'zh_CN' language version and linked 'zh_CN' files back to 'en' files if translation is not yet available

2018-03-13 21:57:08 +01:00

rmt.rst

Restored back original 'zh_CN' version files and updated links between versions

2018-03-13 21:57:08 +01:00

sd_pullup_requirements.rst

Replace all DOS line endings with Unix

2018-07-12 19:10:37 +08:00

sdio_slave.rst

doc(sdio_slave): add some information of slave protocol

2018-06-25 06:55:19 +00:00

sdmmc_host.rst

doc(sdio_slave): add descriptions about conflicts on MTDI pin

2018-06-14 12:04:23 +08:00

sdspi_host.rst

docs: update SDMMC and SDSPI documentation

2018-04-11 11:07:13 +08:00

sigmadelta.rst

Moved files into separate folders per 'en' and 'zh_CN' language version and linked 'zh_CN' files back to 'en' files if translation is not yet available

2018-03-13 21:57:08 +01:00

spi_master.rst

spi_master: change high part config to allow transactions of 64 bytes

2018-08-16 18:55:09 +08:00

spi_slave.rst

Moved files into separate folders per 'en' and 'zh_CN' language version and linked 'zh_CN' files back to 'en' files if translation is not yet available

2018-03-13 21:57:08 +01:00

timer.rst

docs: explicitly note that timer alarms are not recurring

2018-03-19 11:56:57 +08:00

touch_pad.rst

Provided links to 'Touch Sensor Application Note' and 'Guide for ESP32-Sense Development Kit'

2018-05-21 19:29:36 +02:00

uart.rst

driver: add rs485 half duplex interface support to uart driver (update after review)

2018-07-02 15:24:58 +02:00