| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-C61 | ESP32-H2 | ESP32-S3 |
|---|
ESP-IDF Eddystone Example
This example demonstrates Eddystone-compatible BLE sending of eddystone frame, including UID and URL and TLM.
Eddystone is an open beacon protocol specification from Google aimed at improving “proximity-based experiences” with support for both Android and iOS smart device platforms.
Learn more on Beacons and Eddystone.
How to Use Example
Before project configuration and build, be sure to set the correct chip target using:
idf.py set-target <chip_name>
Switch sending mode UID or URL or TLM:
Go to: idf.py menuconfig --> Component config --> Example 'EDDYSTONE SEND' --> then select the EXMAPLE_EDDYSTONE_SEND option.
Hardware Required
- A development board with ESP32/ESP32-C3/ESP32-H2/ESP32-C2/ESP32-S3 SoC (e.g., ESP32-DevKitC, ESP-WROVER-KIT, etc.)
- A USB cable for Power supply and programming
See Development Boards for more information about it.
Build and Flash
Run idf.py -p PORT flash monitor to build, flash and monitor the project.
(To exit the serial monitor, type Ctrl-].)
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.
Example Output
I (532) EDDYSTONE_DEMO: Register callback
I (532) EDDYSTONE_DEMO: Raw advertising data set complete
I (532) EDDYSTONE_DEMO: Advertising started successfully
I (542) main_task: Returned from app_main()
Troubleshooting
For any technical queries, please open an issue on GitHub. We will get back to you soon.