Liu Zhi Fu 072b353b45 bootloader: force SDIO 1.9V if flash is 80M ...

If the SPI flash frequency is 80M, the voltage of SDIO is 1.9V,
otherwise, it can configured to 1.8V or 1.9V via menuconfig.

2018-03-19 16:39:54 +08:00

..

bootloader_config.h

bootloader: Fallback if OTA data is invalid

2017-08-15 09:42:19 +10:00

bootloader_start.c

bootloader: force SDIO 1.9V if flash is 80M

2018-03-19 16:39:54 +08:00

component.mk

Add initial SPI RAM support. This adds support for an ESP-PSRAM32 chip connected to the default flash pins and GPIO 16 and 17. The RAM is mapped to address 0x3F800000, but otherwise ignored by esp-idf as of yet.

2017-09-04 12:05:49 +08:00

esp32.bootloader.ld

bootloader: Remove unnecessary KEEP on data/bss sections, save static RAM

2017-07-19 18:31:59 +10:00

esp32.bootloader.rom.ld

build system: Use component.mk for all components, refactor bootloader build

2017-07-19 09:10:48 +10:00

flash_qio_mode.c

Add GD chip into qio data, so (at least my) ESP-WROVER uses QIO mode succesfully.

2017-09-01 16:53:05 +08:00

flash_qio_mode.h

build system: Use component.mk for all components, refactor bootloader build

2017-07-19 09:10:48 +10:00

Makefile.projbuild

Revert "bootloader: Add option to build with Link Time Optimisation enabled"

2017-07-24 05:14:31 +08:00