- Use led_indicator component from component manager for ws2812 and RGB
LEDs
- Add other components from examples/common via idf_component.yml
instead of adding as EXTRA_COMPONENT_DIRS in CMakeLists.txt
- Three options to chose from 0 (POP_TYPE_MAC), 1 (POP_TYPE_RANDOM) and 2 (POP_TYPE_NONE)
- CUSTOM_POP option is not provided, because it needs additional API call to set custom pop value
- Set button GPIO to 28 for ESP32-C5 devkit (vs GPIO 9 for other C-series)
- Set WS2812 LED GPIO to 27 for ESP32-C5 devkit (vs GPIO 8 for other C-series)
- Updated examples: gpio, switch, multi_device, temperature_sensor, fan, led_light
- With newest IDF releases with recent feature additions, the app partitions were getting overflown.
- This optimised partions file make fullest use of flash. Hence we get more room for app partitions.
- Updated esp_insights submodule and the component version dependency
- Selected `ESP_INSIGHTS_TRANSPORT_MQTT` in examples sdkconfig.defaults
- Called esp_insights_cmd_resp_enable
- Also updated `cli` submodule to the latest
- led_light: Use the new bulk write callback (single callback invoked just once
for multiple param writes) and use esp_rmaker_param_update()
so that all updated params are also reported together.
- Other examples: Just replace esp_rmaker_param_update_and_report with
esp_rmaker_param_update() and let the Rainmaker core report all
updated params together.
- Added entry for esp32c2 build in CI
- RAM optimized sdkconfig.defaults.esp32c2
- Disable ws2812 led drivers from non-rmt supported devices
- Use GPIO9 as BOOT button for C2
- Due to some changes in esp-idf after v5.1.3, CONFIG_BT_ENABLED gets set
even for esp32s2, causing issues in compilation.
- In earlier esp-idf versions, since this was not applicable for esp32-s2,
it was getting skipped even when it was present in sdkconfig.defaults.
- Added sdkconfig.defaults.esp32s2 and disabled BT explicitly
1. ESP32C6 button configs for RGB LED and Boot GPIO
2. CI: Added entry for C6 in `.gitlab.yaml`
3. Added `partitions_4mb_optimised.csv` which uses flash to the full extent
- Created sdkconfig.defaults for esp32c6 and used partitions_4mb_optimised.csv as default
- This is made default for esp32c6 because, for esp32c6, image sizes exceed config from partitions.csv
4. Fixed matter examples CMakeLits.txt files for c6 support
From IDF 5.1 and above, we are out of IRAM for ESP32.
Enabled FreeRTOS functions to flash option to save IRAM. This is same existing fix in other examples
Signed-off-by: Vikram Dattu <vikram.dattu@espressif.com>
If local control is enabled via config option (CONFIG_ESP_RMAKER_LOCAL_CTRL_AUTO_ENABLE),
the enabling/disabling will happen internally and the behaviour will be
unchanged. However, if the config option is disabled, applications can
still call esp_rmaker_local_ctrl_enable/disable at runtime as and when
required, if CONFIG_ESP_RMAKER_LOCAL_CTRL_FEATURE_ENABLE option is enabled.
Note that the older config option CONFIG_ESP_RMAKER_LOCAL_CTRL_ENABLE
has been renamed to CONFIG_ESP_RMAKER_LOCAL_CTRL_AUTO_ENABLE. However,
CONFIG_ESP_RMAKER_LOCAL_CTRL_ENABLE will also continue to work and
ensure backward compatibility
For BLE provisioning, adding some metadata in BLE advertisement can help
apps in filtering the scanned device list better, instead of relying
just on the prefix. It can also help show the device type even before
provisioning.
Metadata has been added in led_light and switch examples only, but can be
added in any other project too, as per the apps' requirement.
- Updated partitions.csv in all examples to use final
esp_secure_cert partition format.
- This option can only be enabled if claiming is disabled.
- The Rainmaker app will fall back to using NVS if it
fails to fetch from the `esp_secure_cert` partition.
This has been done to allow a common firmware to be built that
can run on both kinds of devices, i.e. ones that use NVS
and ones that use the `esp_secure_cert` partition.
This reverts commit 7c1e894fe0.
The commit needs to be reverted as IDF5.0 does not allow selecting
ESP_HTTPS_SERVER when MBEDTLS is in client only mode.
.. Since this is the recommended setting and well supported by the
RainMaker SDK, to ensure that OTA upgrades do not break the device
and ensure that the MQTT connection works fine with the new firmware.
- OTA using topics is now enabled in all examples
- esp_rmaker_ota_enable_default() is the simplified API that enables
OTA using Topics with the default server certificates
Instead of using 1 or 2 certificates for server authentication, use a
bundle of commonly used server certificates, so that even if the server
moves to a different signing authority, the device connection is not
affected.
This change has been done for claiming, OTA and MQTT certificates.
Earlier example used a local certificate just for demo purposes.
However, since the RainMaker OTA server is the default server anyways,
it's better to use that same default certificate.
Features now enabled by default are:
- User id check in user-node association for better handling of reset to
factory from security perspective.
- Secure local control
Order of component dirs has been changed so that the rmaker_common from
esp-rainmker gets used, rather than the one from esp-insights
Setting correct timezone is mandatory for scheduling to work correctly.
Earlier, the default timezone was set to "Asia/Shanghai" and a config
change was required for setting appropriate timezone.
However, now that the phone apps have support for setting the timezone
using the RainMaker timezone service, it has been enabled in all
examples that had scheduling enabled.
Button event callbacks are executed in the context of FreeRTOS Timer task.
Reporting param updates from that causes stack overflow, specifically on ESP32-C3.
As a temporary workaround, the stack size for FreeRTOS Timer task has been increased.
Default parameter names like name, power, etc. have been changed to Name, Power, etc.
respectively, so that they look better in the phone app UIs.
Note that, with this change, any user configured device name (the name set from phone apps),
or any other persistent parameter for which a default name was used (Eg. power)
will be affected, as the values will no more be found in the NVS storage. Please edit your
application code accordingly if you want to stick with the old names.
Please check CHANGES.md for guidelines.
The common code for WS2812 RGB LED has been moved to a component ws2812_led.
The WS2812 LED is available only on ESP32-S2-Saola-1 boards and hence
it will be enabled only if IDF target is set to ESP32S2. It can
be disabled by disabling the CONFIG_WS2812_LED_ENABLE config option.
led_strip component files have also been moved to ws2812_led
MAC address is a public information and can also be sniffed easily. Creating the proof of
possession pin from that is not secure enough. Instead, a random stream of bytes is now generated
and stored in the fctry partition during claiming and that is used for the PoP.
- APIs and data structures changed to a more object oriented approach.
- Some internal files split into multiple files to separate out functionality
of node, device and parameter.
- A new doc file CHANGES.md added to help understand the changes.
- Modified all the examples as per these changes in the RainMaker APIs.
