alex/esp-rainmaker

mirror of https://github.com/espressif/esp-rainmaker.git synced 2026-01-14 13:30:33 +00:00

Files

Piyush Shah 86b4dbbd68 examples: Changes for the ESP32-C3, primarily for Boot button

And some other minor changes
- Corrected comments in example READMEs and sdkconfig.defaults
- Duplicate macro in homekit_switch removed

2021-02-09 22:32:03 +05:30

769 B

Raw Permalink Blame History

GPIO Example

Build and Flash firmware

Follow the ESP RainMaker Documentation Get Started section to build and flash this firmware. Just note the path of this example.

What to expect in this example?

This example just provides 3 boolean parameters, linked to 3 GPIOS.
Toggling the buttons on the phone app should toggle the GPIOs on your board (and the LEDs, if any, connected to the GPIOs), and also print messages like these on the ESP32-S2 monitor:

I (16073) app_main: Received value = true for GPIO-Device - Red

Reset to Factory

Press and hold the BOOT button for more than 3 seconds to reset the board to factory defaults. You will have to provision the board again to use it.