mirror of https://github.com/espressif/esp-rainmaker.git synced 2026-01-15 10:25:28 +00:00

Files

Piyush Shah 229713488c examples: Enable some security features and change order of component dirs

Features now enabled by default are:

- User id check in user-node association for better handling of reset to
factory from security perspective.
- Secure local control

Order of component dirs has been changed so that the rmaker_common from
esp-rainmker gets used, rather than the one from esp-insights

2022-01-25 13:59:28 +05:30

main

examples: Fixed typos in comment

2021-09-09 10:53:31 +05:30

CMakeLists.txt

examples: Enable some security features and change order of component dirs

2022-01-25 13:59:28 +05:30

Makefile

examples: Use the common app_wifi file even in the gpio example

2020-06-25 12:08:04 +05:30

partitions.csv

esp_rainmaker: Add various required components, examples and CLI

2020-04-16 04:13:35 +05:30

README.md

examples: Changes for the ESP32-C3, primarily for Boot button

2021-02-09 22:32:03 +05:30

sdkconfig.defaults

examples: Enable some security features and change order of component dirs

2022-01-25 13:59:28 +05:30

README.md

GPIO Example

Build and Flash firmware

Follow the ESP RainMaker Documentation Get Started section to build and flash this firmware. Just note the path of this example.

What to expect in this example?

This example just provides 3 boolean parameters, linked to 3 GPIOS.
Toggling the buttons on the phone app should toggle the GPIOs on your board (and the LEDs, if any, connected to the GPIOs), and also print messages like these on the ESP32-S2 monitor:

I (16073) app_main: Received value = true for GPIO-Device - Red

Reset to Factory

Press and hold the BOOT button for more than 3 seconds to reset the board to factory defaults. You will have to provision the board again to use it.