mirror of https://github.com/espressif/esp-rainmaker.git synced 2026-01-19 11:55:36 +00:00

Files

Vikram Dattu c43cd071fa IRAM optimization fix for ESP32 to all examples

From IDF 5.1 and above, we are out of IRAM for ESP32.
Enabled FreeRTOS functions to flash option to save IRAM. This is same existing fix in other examples

Signed-off-by: Vikram Dattu <vikram.dattu@espressif.com>

2023-09-15 16:18:47 +05:30

main

example: Update IO for all examples to work with all ESP devkits and provide options in menuconfig

2022-06-07 10:47:40 +08:00

CMakeLists.txt

examples: Enable some security features and change order of component dirs

2022-01-25 13:59:28 +05:30

Makefile

examples: Use the common app_wifi file even in the gpio example

2020-06-25 12:08:04 +05:30

partitions.csv

examples: Include nvs keys partition to enable using nvs encryption

2023-07-14 14:37:24 +05:30

README.md

examples: Changes for the ESP32-C3, primarily for Boot button

2021-02-09 22:32:03 +05:30

sdkconfig.defaults

feature: Add APIs to enable/disable local control.

2023-09-08 23:46:21 +05:30

sdkconfig.defaults.esp32

IRAM optimization fix for ESP32 to all examples

2023-09-15 16:18:47 +05:30

README.md

GPIO Example

Build and Flash firmware

Follow the ESP RainMaker Documentation Get Started section to build and flash this firmware. Just note the path of this example.

What to expect in this example?

This example just provides 3 boolean parameters, linked to 3 GPIOS.
Toggling the buttons on the phone app should toggle the GPIOs on your board (and the LEDs, if any, connected to the GPIOs), and also print messages like these on the ESP32-S2 monitor:

I (16073) app_main: Received value = true for GPIO-Device - Red

Reset to Factory

Press and hold the BOOT button for more than 3 seconds to reset the board to factory defaults. You will have to provision the board again to use it.