mirror of https://github.com/espressif/esp-rainmaker.git synced 2026-01-19 16:03:45 +00:00

Files

Piyush Shah b6ca97d689 examples: Changes for bulk parameter reporting

- led_light: Use the new bulk write callback (single callback invoked just once
  for multiple param writes) and use esp_rmaker_param_update()
  so that all updated params are also reported together.
- Other examples: Just replace esp_rmaker_param_update_and_report with
  esp_rmaker_param_update() and let the Rainmaker core report all
  updated params together.

2024-06-20 14:26:11 +08:00

main

examples: Changes for bulk parameter reporting

2024-06-20 14:26:11 +08:00

CMakeLists.txt

examples: Enable some security features and change order of component dirs

2022-01-25 13:59:28 +05:30

Makefile

examples: Use the common app_wifi file even in the gpio example

2020-06-25 12:08:04 +05:30

partitions_4mb_optimised.csv

examples: Added support for ESP32C6

2023-10-26 17:38:53 +05:30

partitions.csv

examples: Include nvs keys partition to enable using nvs encryption

2023-07-14 14:37:24 +05:30

README.md

examples: Changes for the ESP32-C3, primarily for Boot button

2021-02-09 22:32:03 +05:30

sdkconfig.defaults

feature: Add APIs to enable/disable local control.

2023-09-08 23:46:21 +05:30

sdkconfig.defaults.esp32

IRAM optimization fix for ESP32 to all examples

2023-09-15 16:18:47 +05:30

sdkconfig.defaults.esp32c2

examples: Add support for esp32c2

2024-05-09 20:38:11 +05:30

sdkconfig.defaults.esp32c6

examples: Added support for ESP32C6

2023-10-26 17:38:53 +05:30

sdkconfig.defaults.esp32s2

bugfix: ci failures were seen for esp32s2

2024-03-08 20:30:19 +05:30

README.md

GPIO Example

Build and Flash firmware

Follow the ESP RainMaker Documentation Get Started section to build and flash this firmware. Just note the path of this example.

What to expect in this example?

This example just provides 3 boolean parameters, linked to 3 GPIOS.
Toggling the buttons on the phone app should toggle the GPIOs on your board (and the LEDs, if any, connected to the GPIOs), and also print messages like these on the ESP32-S2 monitor:

I (16073) app_main: Received value = true for GPIO-Device - Red

Reset to Factory

Press and hold the BOOT button for more than 3 seconds to reset the board to factory defaults. You will have to provision the board again to use it.