mirror of https://github.com/espressif/esp-rainmaker.git synced 2026-01-15 23:06:04 +00:00

Files

Piyush Shah cd173972a7 examples: Enable CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE in all examples

.. Since this is the recommended setting and well supported by the
RainMaker SDK, to ensure that OTA upgrades do not break the device
and ensure that the MQTT connection works fine with the new firmware.

2022-07-13 21:56:04 +05:30

main

example: Update IO for all examples to work with all ESP devkits and provide options in menuconfig

2022-06-07 10:47:40 +08:00

CMakeLists.txt

examples: Enable some security features and change order of component dirs

2022-01-25 13:59:28 +05:30

Makefile

examples: Use the common app_wifi file even in the gpio example

2020-06-25 12:08:04 +05:30

partitions.csv

esp_rainmaker: Add various required components, examples and CLI

2020-04-16 04:13:35 +05:30

README.md

examples: Changes for the ESP32-C3, primarily for Boot button

2021-02-09 22:32:03 +05:30

sdkconfig.defaults

examples: Enable CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE in all examples

2022-07-13 21:56:04 +05:30

README.md

GPIO Example

Build and Flash firmware

Follow the ESP RainMaker Documentation Get Started section to build and flash this firmware. Just note the path of this example.

What to expect in this example?

This example just provides 3 boolean parameters, linked to 3 GPIOS.
Toggling the buttons on the phone app should toggle the GPIOs on your board (and the LEDs, if any, connected to the GPIOs), and also print messages like these on the ESP32-S2 monitor:

I (16073) app_main: Received value = true for GPIO-Device - Red

Reset to Factory

Press and hold the BOOT button for more than 3 seconds to reset the board to factory defaults. You will have to provision the board again to use it.