mirror of https://github.com/espressif/esp-rainmaker.git synced 2026-01-14 15:35:45 +00:00

Files

Piyush Shah f6e07b593e examples: Configure ESP32-C5 GPIO defaults for examples

- Set button GPIO to 28 for ESP32-C5 devkit (vs GPIO 9 for other C-series)
- Set WS2812 LED GPIO to 27 for ESP32-C5 devkit (vs GPIO 8 for other C-series)
- Updated examples: gpio, switch, multi_device, temperature_sensor, fan, led_light

2025-06-09 17:44:47 +05:30

main

examples: Configure ESP32-C5 GPIO defaults for examples

2025-06-09 17:44:47 +05:30

CMakeLists.txt

examples: Changes for component manager based builds

2025-03-25 17:54:31 +05:30

Makefile

examples: Use the common app_wifi file even in the gpio example

2020-06-25 12:08:04 +05:30

partitions_4mb_optimised.csv

examples: Added support for ESP32C6

2023-10-26 17:38:53 +05:30

partitions.csv

examples: Include nvs keys partition to enable using nvs encryption

2023-07-14 14:37:24 +05:30

README.md

examples: Changes for the ESP32-C3, primarily for Boot button

2021-02-09 22:32:03 +05:30

sdkconfig.defaults

Changed default partion csv file to partions_4mb_optimised.csv

2024-10-15 18:06:42 +05:30

sdkconfig.defaults.esp32

IRAM optimization fix for ESP32 to all examples

2023-09-15 16:18:47 +05:30

sdkconfig.defaults.esp32c2

examples: Add support for esp32c2

2024-05-09 20:38:11 +05:30

sdkconfig.defaults.esp32c6

examples: Added support for ESP32C6

2023-10-26 17:38:53 +05:30

sdkconfig.defaults.esp32h2

example: Update examples to use app_network for Thread provisioning

2024-08-06 16:29:35 +08:00

sdkconfig.defaults.esp32s2

bugfix: ci failures were seen for esp32s2

2024-03-08 20:30:19 +05:30

README.md

GPIO Example

Build and Flash firmware

Follow the ESP RainMaker Documentation Get Started section to build and flash this firmware. Just note the path of this example.

What to expect in this example?

This example just provides 3 boolean parameters, linked to 3 GPIOS.
Toggling the buttons on the phone app should toggle the GPIOs on your board (and the LEDs, if any, connected to the GPIOs), and also print messages like these on the ESP32-S2 monitor:

I (16073) app_main: Received value = true for GPIO-Device - Red

Reset to Factory

Press and hold the BOOT button for more than 3 seconds to reset the board to factory defaults. You will have to provision the board again to use it.