mirror of
https://github.com/espressif/esp-idf.git
synced 2025-11-04 06:11:06 +00:00
303 lines
8.2 KiB
C
303 lines
8.2 KiB
C
/*
|
|
* SPDX-FileCopyrightText: 2015-2023 Espressif Systems (Shanghai) CO LTD
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
#include <stdint.h>
|
|
#include <stdbool.h>
|
|
#include "esp_err.h"
|
|
#include "soc/soc_caps.h"
|
|
#include "hal/rtc_io_types.h"
|
|
#include "driver/gpio.h"
|
|
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/**
|
|
* @brief Determine if the specified GPIO is a valid RTC GPIO.
|
|
*
|
|
* @param gpio_num GPIO number
|
|
* @return true if GPIO is valid for RTC GPIO use. false otherwise.
|
|
*/
|
|
bool rtc_gpio_is_valid_gpio(gpio_num_t gpio_num);
|
|
|
|
#define RTC_GPIO_IS_VALID_GPIO(gpio_num) rtc_gpio_is_valid_gpio(gpio_num)
|
|
|
|
#if SOC_RTCIO_PIN_COUNT > 0
|
|
/**
|
|
* @brief Get RTC IO index number by gpio number.
|
|
*
|
|
* @param gpio_num GPIO number
|
|
* @return
|
|
* >=0: Index of rtcio.
|
|
* -1 : The gpio is not rtcio.
|
|
*/
|
|
int rtc_io_number_get(gpio_num_t gpio_num);
|
|
|
|
/**
|
|
* @brief Init a GPIO as RTC GPIO
|
|
*
|
|
* This function must be called when initializing a pad for an analog function.
|
|
*
|
|
* @param gpio_num GPIO number (e.g. GPIO_NUM_12)
|
|
*
|
|
* @return
|
|
* - ESP_OK success
|
|
* - ESP_ERR_INVALID_ARG GPIO is not an RTC IO
|
|
*/
|
|
esp_err_t rtc_gpio_init(gpio_num_t gpio_num);
|
|
|
|
/**
|
|
* @brief Init a GPIO as digital GPIO
|
|
*
|
|
* @param gpio_num GPIO number (e.g. GPIO_NUM_12)
|
|
*
|
|
* @return
|
|
* - ESP_OK success
|
|
* - ESP_ERR_INVALID_ARG GPIO is not an RTC IO
|
|
*/
|
|
esp_err_t rtc_gpio_deinit(gpio_num_t gpio_num);
|
|
|
|
#if SOC_RTCIO_INPUT_OUTPUT_SUPPORTED
|
|
/**
|
|
* @brief Get the RTC IO input level
|
|
*
|
|
* @param gpio_num GPIO number (e.g. GPIO_NUM_12)
|
|
*
|
|
* @return
|
|
* - 1 High level
|
|
* - 0 Low level
|
|
* - ESP_ERR_INVALID_ARG GPIO is not an RTC IO
|
|
*/
|
|
uint32_t rtc_gpio_get_level(gpio_num_t gpio_num);
|
|
|
|
/**
|
|
* @brief Set the RTC IO output level
|
|
*
|
|
* @param gpio_num GPIO number (e.g. GPIO_NUM_12)
|
|
* @param level output level
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG GPIO is not an RTC IO
|
|
*/
|
|
esp_err_t rtc_gpio_set_level(gpio_num_t gpio_num, uint32_t level);
|
|
|
|
/**
|
|
* @brief RTC GPIO set direction
|
|
*
|
|
* Configure RTC GPIO direction, such as output only, input only,
|
|
* output and input.
|
|
*
|
|
* @param gpio_num GPIO number (e.g. GPIO_NUM_12)
|
|
* @param mode GPIO direction
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG GPIO is not an RTC IO
|
|
*/
|
|
esp_err_t rtc_gpio_set_direction(gpio_num_t gpio_num, rtc_gpio_mode_t mode);
|
|
|
|
/**
|
|
* @brief RTC GPIO set direction in deep sleep mode or disable sleep status (default).
|
|
* In some application scenarios, IO needs to have another states during deep sleep.
|
|
*
|
|
* NOTE: ESP32 support INPUT_ONLY mode.
|
|
* ESP32S2 support INPUT_ONLY, OUTPUT_ONLY, INPUT_OUTPUT mode.
|
|
*
|
|
* @param gpio_num GPIO number (e.g. GPIO_NUM_12)
|
|
* @param mode GPIO direction
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG GPIO is not an RTC IO
|
|
*/
|
|
esp_err_t rtc_gpio_set_direction_in_sleep(gpio_num_t gpio_num, rtc_gpio_mode_t mode);
|
|
|
|
/**
|
|
* @brief RTC GPIO pullup enable
|
|
*
|
|
* This function only works for RTC IOs. In general, call gpio_pullup_en,
|
|
* which will work both for normal GPIOs and RTC IOs.
|
|
*
|
|
* @param gpio_num GPIO number (e.g. GPIO_NUM_12)
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG GPIO is not an RTC IO
|
|
*/
|
|
esp_err_t rtc_gpio_pullup_en(gpio_num_t gpio_num);
|
|
|
|
/**
|
|
* @brief RTC GPIO pulldown enable
|
|
*
|
|
* This function only works for RTC IOs. In general, call gpio_pulldown_en,
|
|
* which will work both for normal GPIOs and RTC IOs.
|
|
*
|
|
* @param gpio_num GPIO number (e.g. GPIO_NUM_12)
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG GPIO is not an RTC IO
|
|
*/
|
|
esp_err_t rtc_gpio_pulldown_en(gpio_num_t gpio_num);
|
|
|
|
/**
|
|
* @brief RTC GPIO pullup disable
|
|
*
|
|
* This function only works for RTC IOs. In general, call gpio_pullup_dis,
|
|
* which will work both for normal GPIOs and RTC IOs.
|
|
*
|
|
* @param gpio_num GPIO number (e.g. GPIO_NUM_12)
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG GPIO is not an RTC IO
|
|
*/
|
|
esp_err_t rtc_gpio_pullup_dis(gpio_num_t gpio_num);
|
|
|
|
/**
|
|
* @brief RTC GPIO pulldown disable
|
|
*
|
|
* This function only works for RTC IOs. In general, call gpio_pulldown_dis,
|
|
* which will work both for normal GPIOs and RTC IOs.
|
|
*
|
|
* @param gpio_num GPIO number (e.g. GPIO_NUM_12)
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG GPIO is not an RTC IO
|
|
*/
|
|
esp_err_t rtc_gpio_pulldown_dis(gpio_num_t gpio_num);
|
|
|
|
/**
|
|
* @brief Set RTC GPIO pad drive capability
|
|
*
|
|
* @param gpio_num GPIO number, only support output GPIOs
|
|
* @param strength Drive capability of the pad
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t rtc_gpio_set_drive_capability(gpio_num_t gpio_num, gpio_drive_cap_t strength);
|
|
|
|
/**
|
|
* @brief Get RTC GPIO pad drive capability
|
|
*
|
|
* @param gpio_num GPIO number, only support output GPIOs
|
|
* @param strength Pointer to accept drive capability of the pad
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t rtc_gpio_get_drive_capability(gpio_num_t gpio_num, gpio_drive_cap_t* strength);
|
|
|
|
#endif // SOC_RTCIO_INPUT_OUTPUT_SUPPORTED
|
|
|
|
#if SOC_RTCIO_HOLD_SUPPORTED
|
|
|
|
/**
|
|
* @brief Enable hold function on an RTC IO pad
|
|
*
|
|
* Enabling HOLD function will cause the pad to latch current values of
|
|
* input enable, output enable, output value, function, drive strength values.
|
|
* This function is useful when going into light or deep sleep mode to prevent
|
|
* the pin configuration from changing.
|
|
*
|
|
* @param gpio_num GPIO number (e.g. GPIO_NUM_12)
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG GPIO is not an RTC IO
|
|
*/
|
|
esp_err_t rtc_gpio_hold_en(gpio_num_t gpio_num);
|
|
|
|
/**
|
|
* @brief Disable hold function on an RTC IO pad
|
|
*
|
|
* Disabling hold function will allow the pad receive the values of
|
|
* input enable, output enable, output value, function, drive strength from
|
|
* RTC_IO peripheral.
|
|
*
|
|
* @param gpio_num GPIO number (e.g. GPIO_NUM_12)
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG GPIO is not an RTC IO
|
|
*/
|
|
esp_err_t rtc_gpio_hold_dis(gpio_num_t gpio_num);
|
|
|
|
/**
|
|
* @brief Enable force hold signal for all RTC IOs
|
|
*
|
|
* Each RTC pad has a "force hold" input signal from the RTC controller.
|
|
* If this signal is set, pad latches current values of input enable,
|
|
* function, output enable, and other signals which come from the RTC mux.
|
|
* Force hold signal is enabled before going into deep sleep for pins which
|
|
* are used for EXT1 wakeup.
|
|
*/
|
|
esp_err_t rtc_gpio_force_hold_en_all(void);
|
|
|
|
/**
|
|
* @brief Disable force hold signal for all RTC IOs
|
|
*/
|
|
esp_err_t rtc_gpio_force_hold_dis_all(void);
|
|
|
|
#endif // SOC_RTCIO_HOLD_SUPPORTED
|
|
|
|
#if SOC_RTCIO_HOLD_SUPPORTED && SOC_RTCIO_INPUT_OUTPUT_SUPPORTED
|
|
/**
|
|
* @brief Helper function to disconnect internal circuits from an RTC IO
|
|
* This function disables input, output, pullup, pulldown, and enables
|
|
* hold feature for an RTC IO.
|
|
* Use this function if an RTC IO needs to be disconnected from internal
|
|
* circuits in deep sleep, to minimize leakage current.
|
|
*
|
|
* In particular, for ESP32-WROVER module, call
|
|
* rtc_gpio_isolate(GPIO_NUM_12) before entering deep sleep, to reduce
|
|
* deep sleep current.
|
|
*
|
|
* @param gpio_num GPIO number (e.g. GPIO_NUM_12).
|
|
* @return
|
|
* - ESP_OK on success
|
|
* - ESP_ERR_INVALID_ARG if GPIO is not an RTC IO
|
|
*/
|
|
esp_err_t rtc_gpio_isolate(gpio_num_t gpio_num);
|
|
#endif // SOC_RTCIO_HOLD_SUPPORTED && SOC_RTCIO_INPUT_OUTPUT_SUPPORTED
|
|
|
|
#if SOC_RTCIO_WAKE_SUPPORTED
|
|
|
|
/**
|
|
* @brief Enable wakeup from sleep mode using specific GPIO
|
|
* @param gpio_num GPIO number
|
|
* @param intr_type Wakeup on high level (GPIO_INTR_HIGH_LEVEL) or low level
|
|
* (GPIO_INTR_LOW_LEVEL)
|
|
* @return
|
|
* - ESP_OK on success
|
|
* - ESP_ERR_INVALID_ARG if gpio_num is not an RTC IO, or intr_type is not
|
|
* one of GPIO_INTR_HIGH_LEVEL, GPIO_INTR_LOW_LEVEL.
|
|
*/
|
|
esp_err_t rtc_gpio_wakeup_enable(gpio_num_t gpio_num, gpio_int_type_t intr_type);
|
|
|
|
/**
|
|
* @brief Disable wakeup from sleep mode using specific GPIO
|
|
* @param gpio_num GPIO number
|
|
* @return
|
|
* - ESP_OK on success
|
|
* - ESP_ERR_INVALID_ARG if gpio_num is not an RTC IO
|
|
*/
|
|
esp_err_t rtc_gpio_wakeup_disable(gpio_num_t gpio_num);
|
|
|
|
#endif // SOC_RTCIO_WAKE_SUPPORTED
|
|
|
|
#endif // SOC_RTCIO_PIN_COUNT > 0
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|