mirror of
				https://github.com/espressif/esp-idf.git
				synced 2025-11-04 14:14:11 +00:00 
			
		
		
		
	
		
			
				
	
	
		
			286 lines
		
	
	
		
			9.5 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			286 lines
		
	
	
		
			9.5 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
/*
 | 
						|
 Tests for the adc2 device driver
 | 
						|
*/
 | 
						|
#include "esp_system.h"
 | 
						|
#include "driver/adc.h"
 | 
						|
#include "unity.h"
 | 
						|
#include "esp_system.h"
 | 
						|
#include "esp_event.h"
 | 
						|
#include "esp_wifi.h"
 | 
						|
#include "esp_log.h"
 | 
						|
#include "nvs_flash.h"
 | 
						|
#include "test_utils.h"
 | 
						|
#include "driver/i2s.h"
 | 
						|
#include "driver/gpio.h"
 | 
						|
 | 
						|
#if !TEMPORARY_DISABLED_FOR_TARGETS(ESP32S3, ESP32C3)
 | 
						|
#include "driver/dac.h"
 | 
						|
 | 
						|
static const char* TAG = "test_adc2";
 | 
						|
 | 
						|
#ifdef CONFIG_IDF_TARGET_ESP32
 | 
						|
    #define ADC_TEST_WIDTH         ADC_WIDTH_BIT_12
 | 
						|
    #define ADC_TEST_RESOLUTION    (4096)
 | 
						|
    #define ADC_TEST_DAC_RANGE     (256)
 | 
						|
    #define ADC_TEST_CH1           ADC2_CHANNEL_8
 | 
						|
    #define ADC_TEST_CH2           ADC2_CHANNEL_9
 | 
						|
    #define ADC_TEST_ERROR         (600)
 | 
						|
    #define ADC1_CHANNEL_4_IO      (32)
 | 
						|
    #define SAMPLE_RATE            (36000)
 | 
						|
    #define SAMPLE_BITS            (16)
 | 
						|
#elif defined CONFIG_IDF_TARGET_ESP32S2
 | 
						|
    #define ADC_TEST_WIDTH         ADC_WIDTH_BIT_13   //ESP32S2 only support 13 bit width
 | 
						|
    #define ADC_TEST_RESOLUTION    (8192)
 | 
						|
    #define ADC_TEST_DAC_RANGE     (210)
 | 
						|
    #define ADC_TEST_CH1           ADC2_CHANNEL_6
 | 
						|
    #define ADC_TEST_CH2           ADC2_CHANNEL_7
 | 
						|
    #define ADC_TEST_ERROR         (1500)
 | 
						|
#endif
 | 
						|
#define DEFAULT_SSID "TEST_SSID"
 | 
						|
#define DEFAULT_PWD "TEST_PASS"
 | 
						|
 | 
						|
static void wifi_event_handler(void* arg, esp_event_base_t event_base,
 | 
						|
                                int32_t event_id, void* event_data)
 | 
						|
{
 | 
						|
    printf("ev_handle_called.\n");
 | 
						|
    switch(event_id) {
 | 
						|
        case WIFI_EVENT_STA_START:
 | 
						|
            ESP_LOGI(TAG, "WIFI_EVENT_STA_START");
 | 
						|
    //do not actually connect in test case
 | 
						|
            //;
 | 
						|
            break;
 | 
						|
        case WIFI_EVENT_STA_DISCONNECTED:
 | 
						|
            ESP_LOGI(TAG, "WIFI_EVENT_STA_DISCONNECTED");
 | 
						|
            TEST_ESP_OK(esp_wifi_connect());
 | 
						|
            break;
 | 
						|
        default:
 | 
						|
            break;
 | 
						|
    }
 | 
						|
    return ;
 | 
						|
}
 | 
						|
 | 
						|
static void ip_event_handler(void* arg, esp_event_base_t event_base,
 | 
						|
                                int32_t event_id, void* event_data)
 | 
						|
{
 | 
						|
    ip_event_got_ip_t *event;
 | 
						|
    printf("ev_handle_called.\n");
 | 
						|
    switch(event_id) {
 | 
						|
        case IP_EVENT_STA_GOT_IP:
 | 
						|
            event = (ip_event_got_ip_t*)event_data;
 | 
						|
            ESP_LOGI(TAG, "IP_EVENT_STA_GOT_IP");
 | 
						|
            ESP_LOGI(TAG, "got ip:" IPSTR "\n", IP2STR(&event->ip_info.ip));
 | 
						|
            break;
 | 
						|
        default:
 | 
						|
            break;
 | 
						|
    }
 | 
						|
 | 
						|
    return ;
 | 
						|
}
 | 
						|
 | 
						|
static int event_init(void)
 | 
						|
{
 | 
						|
    TEST_ESP_OK(esp_event_loop_create_default());
 | 
						|
    ESP_ERROR_CHECK(esp_event_handler_register(WIFI_EVENT, ESP_EVENT_ANY_ID, &wifi_event_handler, NULL));
 | 
						|
    ESP_ERROR_CHECK(esp_event_handler_register(IP_EVENT, ESP_EVENT_ANY_ID, &ip_event_handler, NULL));
 | 
						|
    return ESP_OK;
 | 
						|
}
 | 
						|
 | 
						|
static int event_deinit(void)
 | 
						|
{
 | 
						|
    ESP_ERROR_CHECK(esp_event_handler_unregister(WIFI_EVENT, ESP_EVENT_ANY_ID, &wifi_event_handler));
 | 
						|
    ESP_ERROR_CHECK(esp_event_handler_unregister(IP_EVENT, ESP_EVENT_ANY_ID, &ip_event_handler));
 | 
						|
    return ESP_OK;
 | 
						|
}
 | 
						|
 | 
						|
TEST_CASE("adc2 work with wifi","[adc]")
 | 
						|
{
 | 
						|
    int     read_raw;
 | 
						|
    int     target_value;
 | 
						|
 | 
						|
    test_case_uses_tcpip();
 | 
						|
 | 
						|
    //adc and dac init
 | 
						|
    TEST_ESP_OK( dac_output_enable( DAC_CHANNEL_1 ));
 | 
						|
    TEST_ESP_OK( dac_output_enable( DAC_CHANNEL_2 ));
 | 
						|
    TEST_ESP_OK( dac_output_voltage( DAC_CHANNEL_1, 30 ));
 | 
						|
    TEST_ESP_OK( dac_output_voltage( DAC_CHANNEL_2, 60 ));
 | 
						|
    TEST_ESP_OK( adc2_config_channel_atten( ADC_TEST_CH1, ADC_ATTEN_0db ));
 | 
						|
    TEST_ESP_OK( adc2_config_channel_atten( ADC_TEST_CH2, ADC_ATTEN_0db ));
 | 
						|
    //init wifi
 | 
						|
    printf("nvs init\n");
 | 
						|
    esp_err_t r = nvs_flash_init();
 | 
						|
    if (r == ESP_ERR_NVS_NO_FREE_PAGES || r == ESP_ERR_NVS_NEW_VERSION_FOUND) {
 | 
						|
        printf("no free pages or nvs version mismatch, erase..\n");
 | 
						|
        TEST_ESP_OK(nvs_flash_erase());
 | 
						|
        r = nvs_flash_init();
 | 
						|
    }
 | 
						|
    TEST_ESP_OK( r);
 | 
						|
    esp_netif_init();
 | 
						|
    event_init();
 | 
						|
    esp_netif_create_default_wifi_sta();
 | 
						|
 | 
						|
    wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT();
 | 
						|
    TEST_ESP_OK(esp_wifi_init(&cfg));
 | 
						|
    wifi_config_t wifi_config = {
 | 
						|
        .sta = {
 | 
						|
            .ssid = DEFAULT_SSID,
 | 
						|
            .password = DEFAULT_PWD
 | 
						|
        },
 | 
						|
    };
 | 
						|
    TEST_ESP_OK(esp_wifi_set_mode(WIFI_MODE_STA));
 | 
						|
    TEST_ESP_OK(esp_wifi_set_config(WIFI_IF_STA, &wifi_config));
 | 
						|
 | 
						|
    //test read value
 | 
						|
    TEST_ESP_OK( adc2_get_raw( ADC_TEST_CH1, ADC_TEST_WIDTH, &read_raw ));
 | 
						|
    target_value = 30*ADC_TEST_RESOLUTION*3/ADC_TEST_DAC_RANGE; //3 = 3.3/1.1
 | 
						|
    printf("dac set: %d, adc read: %d (target_value: %d)\n", 30, read_raw, target_value );
 | 
						|
    TEST_ASSERT_INT_WITHIN( ADC_TEST_ERROR, target_value, read_raw );
 | 
						|
    TEST_ESP_OK( adc2_get_raw( ADC_TEST_CH2, ADC_TEST_WIDTH, &read_raw ));
 | 
						|
    target_value = 60*ADC_TEST_RESOLUTION*3/ADC_TEST_DAC_RANGE;
 | 
						|
    printf("dac set: %d, adc read: %d (target_value: %d)\n", 60, read_raw, target_value );
 | 
						|
    TEST_ASSERT_INT_WITHIN( ADC_TEST_ERROR, target_value, read_raw );
 | 
						|
 | 
						|
    //now start wifi
 | 
						|
    printf("wifi start...\n");
 | 
						|
    TEST_ESP_OK(esp_wifi_start());
 | 
						|
    //test reading during wifi on
 | 
						|
#ifdef CONFIG_IDF_TARGET_ESP32
 | 
						|
    TEST_ASSERT_EQUAL( adc2_get_raw( ADC_TEST_CH1, ADC_TEST_WIDTH, &read_raw ), ESP_ERR_TIMEOUT );
 | 
						|
    TEST_ASSERT_EQUAL( adc2_get_raw( ADC_TEST_CH2, ADC_TEST_WIDTH, &read_raw ), ESP_ERR_TIMEOUT );
 | 
						|
#elif defined CONFIG_IDF_TARGET_ESP32S2
 | 
						|
    TEST_ASSERT_EQUAL( adc2_get_raw( ADC_TEST_CH1, ADC_TEST_WIDTH, &read_raw ), ESP_OK );
 | 
						|
    TEST_ASSERT_EQUAL( adc2_get_raw( ADC_TEST_CH2, ADC_TEST_WIDTH, &read_raw ), ESP_OK );
 | 
						|
#endif
 | 
						|
    //wifi stop again
 | 
						|
    printf("wifi stop...\n");
 | 
						|
    TEST_ESP_OK( esp_wifi_stop() );
 | 
						|
    TEST_ESP_OK(esp_wifi_deinit());
 | 
						|
    event_deinit();
 | 
						|
    nvs_flash_deinit();
 | 
						|
 | 
						|
    //test read value
 | 
						|
    TEST_ESP_OK( adc2_get_raw( ADC_TEST_CH1, ADC_TEST_WIDTH, &read_raw ));
 | 
						|
    target_value = 30*ADC_TEST_RESOLUTION*3/ADC_TEST_DAC_RANGE; //3 = 3.3/1.1
 | 
						|
    printf("dac set: %d, adc read: %d (target_value: %d)\n", 30, read_raw, target_value );
 | 
						|
    TEST_ASSERT_INT_WITHIN( ADC_TEST_ERROR, target_value, read_raw );
 | 
						|
    TEST_ESP_OK( adc2_get_raw( ADC_TEST_CH2, ADC_TEST_WIDTH, &read_raw ));
 | 
						|
    target_value = 60*ADC_TEST_RESOLUTION*3/ADC_TEST_DAC_RANGE;
 | 
						|
    printf("dac set: %d, adc read: %d (target_value: %d)\n", 60, read_raw, target_value );
 | 
						|
    TEST_ASSERT_INT_WITHIN( ADC_TEST_ERROR, target_value, read_raw );
 | 
						|
 | 
						|
    printf("test passed...\n");
 | 
						|
 | 
						|
    TEST_IGNORE_MESSAGE("this test case is ignored due to the critical memory leak of esp_netif and event_loop.");
 | 
						|
}
 | 
						|
 | 
						|
#endif
 | 
						|
 | 
						|
#ifdef CONFIG_IDF_TARGET_ESP32
 | 
						|
static void i2s_adc_init(void)
 | 
						|
{
 | 
						|
    i2s_config_t i2s_config = {
 | 
						|
        .mode = I2S_MODE_MASTER | I2S_MODE_RX | I2S_MODE_ADC_BUILT_IN,
 | 
						|
        .sample_rate =  SAMPLE_RATE,
 | 
						|
        .bits_per_sample = SAMPLE_BITS,
 | 
						|
        .channel_format = I2S_CHANNEL_FMT_RIGHT_LEFT,
 | 
						|
        .intr_alloc_flags = 0,
 | 
						|
        .dma_buf_count = 2,
 | 
						|
        .dma_buf_len = 1024,
 | 
						|
        .use_apll = 0,
 | 
						|
    };
 | 
						|
    // install and start I2S driver
 | 
						|
    i2s_driver_install(I2S_NUM_0, &i2s_config, 0, NULL);
 | 
						|
    // init ADC pad
 | 
						|
    i2s_set_adc_mode(ADC_UNIT_1, ADC1_CHANNEL_4);
 | 
						|
    // enable adc sampling, ADC_WIDTH_BIT_12, ADC_ATTEN_DB_11 hard-coded in adc_i2s_mode_init
 | 
						|
    i2s_adc_enable(I2S_NUM_0);
 | 
						|
}
 | 
						|
 | 
						|
static void i2s_adc_test(void)
 | 
						|
{
 | 
						|
    uint16_t *i2sReadBuffer = (uint16_t *)calloc(1024, sizeof(uint16_t));
 | 
						|
    size_t bytesRead;
 | 
						|
    for (int loop = 0; loop < 10; loop++) {
 | 
						|
        for (int level = 0; level <= 1; level++) {
 | 
						|
            if (level == 0) {
 | 
						|
                gpio_set_pull_mode(ADC1_CHANNEL_4_IO, GPIO_PULLDOWN_ONLY);
 | 
						|
            } else {
 | 
						|
                gpio_set_pull_mode(ADC1_CHANNEL_4_IO, GPIO_PULLUP_ONLY);
 | 
						|
            }
 | 
						|
            vTaskDelay(200 / portTICK_RATE_MS);
 | 
						|
            // read data from adc, will block until buffer is full
 | 
						|
            i2s_read(I2S_NUM_0, (void *)i2sReadBuffer, 1024 * sizeof(uint16_t), &bytesRead, portMAX_DELAY);
 | 
						|
 | 
						|
            // calc average
 | 
						|
            int64_t adcSumValue = 0;
 | 
						|
            for (size_t i = 0; i < 1024; i++) {
 | 
						|
                adcSumValue += i2sReadBuffer[i] & 0xfff;
 | 
						|
            }
 | 
						|
            int adcAvgValue = adcSumValue / 1024;
 | 
						|
            printf("adc average val: %d\n", adcAvgValue);
 | 
						|
 | 
						|
            if (level == 0) {
 | 
						|
                TEST_ASSERT_LESS_THAN(100, adcAvgValue);
 | 
						|
            } else {
 | 
						|
                TEST_ASSERT_GREATER_THAN(4000, adcAvgValue);
 | 
						|
            }
 | 
						|
        }
 | 
						|
    }
 | 
						|
    free(i2sReadBuffer);
 | 
						|
}
 | 
						|
 | 
						|
static void i2s_adc_release(void)
 | 
						|
{
 | 
						|
    i2s_adc_disable(I2S_NUM_0);
 | 
						|
    i2s_driver_uninstall(I2S_NUM_0);
 | 
						|
}
 | 
						|
 | 
						|
TEST_CASE("adc1 and i2s work with wifi","[adc][ignore]")
 | 
						|
{
 | 
						|
 | 
						|
    i2s_adc_init();
 | 
						|
    //init wifi
 | 
						|
    printf("nvs init\n");
 | 
						|
    esp_err_t r = nvs_flash_init();
 | 
						|
    if (r == ESP_ERR_NVS_NO_FREE_PAGES || r == ESP_ERR_NVS_NEW_VERSION_FOUND) {
 | 
						|
        printf("no free pages or nvs version mismatch, erase..\n");
 | 
						|
        TEST_ESP_OK(nvs_flash_erase());
 | 
						|
        r = nvs_flash_init();
 | 
						|
    }
 | 
						|
    TEST_ESP_OK(r);
 | 
						|
    esp_netif_init();
 | 
						|
    event_init();
 | 
						|
    esp_netif_create_default_wifi_sta();
 | 
						|
    wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT();
 | 
						|
    TEST_ESP_OK(esp_wifi_init(&cfg));
 | 
						|
    wifi_config_t wifi_config = {
 | 
						|
        .sta = {
 | 
						|
            .ssid = DEFAULT_SSID,
 | 
						|
            .password = DEFAULT_PWD
 | 
						|
        },
 | 
						|
    };
 | 
						|
    TEST_ESP_OK(esp_wifi_set_mode(WIFI_MODE_STA));
 | 
						|
    TEST_ESP_OK(esp_wifi_set_config(WIFI_IF_STA, &wifi_config));
 | 
						|
    i2s_adc_test();
 | 
						|
    //now start wifi
 | 
						|
    printf("wifi start...\n");
 | 
						|
    TEST_ESP_OK(esp_wifi_start());
 | 
						|
    //test reading during wifi on
 | 
						|
    i2s_adc_test();
 | 
						|
    //wifi stop again
 | 
						|
    printf("wifi stop...\n");
 | 
						|
 | 
						|
    TEST_ESP_OK( esp_wifi_stop() );
 | 
						|
 | 
						|
    TEST_ESP_OK(esp_wifi_deinit());
 | 
						|
 | 
						|
    event_deinit();
 | 
						|
 | 
						|
    nvs_flash_deinit();
 | 
						|
    i2s_adc_test();
 | 
						|
    i2s_adc_release();
 | 
						|
    printf("test passed...\n");
 | 
						|
    TEST_IGNORE_MESSAGE("this test case is ignored due to the critical memory leak of esp_netif and event_loop.");
 | 
						|
}
 | 
						|
#endif
 |