mirror of
https://github.com/espressif/esp-idf.git
synced 2025-11-03 22:08:28 +00:00
62 lines
2.0 KiB
Markdown
62 lines
2.0 KiB
Markdown
# Iperf Example
|
|
|
|
## Note about iperf version
|
|
The iperf example doesn't support all features in standard iperf. It's compitable with iperf version 2.x.
|
|
|
|
## Note about 80MHz flash frequency
|
|
The iperf can get better throughput if the SPI flash frequency is set to 80MHz, but the system may crash in 80MHz mode for ESP-WROVER-KIT.
|
|
Removing R140~R145 from the board can fix this issue. Currently the default SPI frequency is set to 40MHz, if you want to change the SPI flash
|
|
frequency to 80MHz, please make sure R140~R145 are removed from ESP-WROVER-KIT or use ESP32 DevKitC.
|
|
|
|
## Introduction
|
|
This example implements the protocol used by the common performance measurement tool [iPerf](https://iperf.fr/).
|
|
Performance can be measured between two ESP32s running this example, or between a single ESP32 and a computer running the iPerf tool
|
|
|
|
Demo steps to test station TCP Tx performance:
|
|
|
|
1. Build the iperf example with sdkconfig.defaults, which contains performance test specific configurations
|
|
|
|
2. Run the demo as station mode and join the target AP
|
|
sta ssid password
|
|
|
|
3. Run iperf as server on AP side
|
|
iperf -s -i 3
|
|
|
|
4. Run iperf as client on ESP32 side
|
|
iperf -c 192.168.10.42 -i 3 -t 60
|
|
|
|
The console output, which is printed by station TCP RX throughput test, looks like:
|
|
|
|
>esp32> sta aptest
|
|
>
|
|
>I (5325) iperf: sta connecting to 'aptest'
|
|
>
|
|
>esp32> I (6017) event: ip: 192.168.10.248, mask: 255.255.255.0, gw: 192.168.10.1
|
|
>
|
|
>esp32> iperf -s -i 3 -t 1000
|
|
>
|
|
>I (14958) iperf: mode=tcp-server sip=192.168.10.248:5001, dip=0.0.0.0:5001, interval=3, time=1000
|
|
>
|
|
>Interval Bandwidth
|
|
>
|
|
>esp32> accept: 192.168.10.42,62958
|
|
>
|
|
>0- 3 sec 8.43 Mbits/sec
|
|
>
|
|
>3- 6 sec 36.16 Mbits/sec
|
|
>
|
|
>6- 9 sec 36.22 Mbits/sec
|
|
>
|
|
>9- 12 sec 36.44 Mbits/sec
|
|
>
|
|
>12- 15 sec 36.25 Mbits/sec
|
|
>
|
|
>15- 18 sec 24.36 Mbits/sec
|
|
>
|
|
>18- 21 sec 27.79 Mbits/sec
|
|
|
|
|
|
Steps to test station/soft-AP TCP/UDP RX/TX throughput are similar as test steps in station TCP TX.
|
|
|
|
See the README.md file in the upper level 'examples' directory for more information about examples.
|