mirror of https://github.com/espressif/esp-rainmaker.git synced 2026-01-19 13:57:11 +00:00

Files

Vikram Dattu 5dccee9eac examples: Add support for esp32c2

- Added entry for esp32c2 build in CI
- RAM optimized sdkconfig.defaults.esp32c2
- Disable ws2812 led drivers from non-rmt supported devices
- Use GPIO9 as BOOT button for C2

2024-05-09 20:38:11 +05:30

main

matter examples: Change flag to -std=gnu++17 to fix build errors

2023-09-21 11:18:24 +05:30

CMakeLists.txt

examples: Add support for esp32c2

2024-05-09 20:38:11 +05:30

partitions_4mb_optimised.csv

examples: Added support for ESP32C6

2023-10-26 17:38:53 +05:30

partitions.csv

examples: Increase nvs partition size for matter examples

2024-01-03 16:30:38 +08:00

README.md

Added matter_light and matter_switch example

2023-08-08 14:08:29 +05:30

sdkconfig.defaults

feature: Add APIs to enable/disable local control.

2023-09-08 23:46:21 +05:30

sdkconfig.defaults.esp32c2

examples: Add support for esp32c2

2024-05-09 20:38:11 +05:30

sdkconfig.defaults.esp32c6

examples: Added support for ESP32C6

2023-10-26 17:38:53 +05:30

README.md

Matter + Rainmaker Switch Example

What to expect in this example?

This demonstrates a Matter + RainMaker Switch. Matter is used for commissioning (also known as Wi-Fi provisioning) and local control, whereas RainMaker is used for remote control and OTA upgrades.
This example uses the BOOT button and RGB LED on the ESP32-C3-DevKitC board to demonstrate a switch.
To commission the device, scan the QR Code generated by the mfg_tool script using ESP RainMaker app.
Pressing the BOOT button will send a toggle the power state of switch and send an on/off command to the remote device. This will also reflect on the phone app.
Toggling the button on the phone app should toggle the LED on your board.
To test remote control, change the network connection of the mobile.

Please refer to the README in the parent folder for instructions.